MeshCore

Commit Graph

Author	SHA1	Message	Date
Frieder Schrempf	7723a4cb34	variants: Heltec T114: Enable DC/DC regulator According to the documentation and experiments on other boards using NRF52 + SX1262 this reduces the power consumption significantly. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Jaroslav Škarvada	32d622d969	variants: Heltec T114: Disable LED and GPS when powering off This should reduce power consumption in hibernation. Signed-off-by: Jaroslav Škarvada <[email protected]>	7 months ago
Frieder Schrempf	5235516dc7	variants: XIAO NRF52: Enable status LED Fix the active state of the LEDs (active low) and enable the status LED. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	4a8dcb4906	variants: XIAO NRF52: Support power-off via user button Add the necessary code to properly power-off the Xiao + Wio companions. This way we can achieve around 15 microamps of power consumption in the off state. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	c76d337a00	variants: XIAO NRF52: Enable user button The Xiao nRF52840 combined with the Wio-SX1262 is often used for cheap and compact DIY companion nodes. The Wio actually has an onboard pushbutton that can be used as user button. Enable support for the button. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	11f119a7fb	variants: XIAO NRF52: Enable DC/DC regulator This reduces the power consumption by approximately 25%. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	b9b82fcf1b	variants: WisMesh Tag: Enable status LED Use the blue LED as status LED. This prevents the blue LED from being always-on and draining the battery. Instead use it as status LED with blink patterns as other companion devices do. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	0f565323a0	variants: WisMesh Tag: Enable DC/DC regulator According to the documentation and experiments on other boards using NRF52 + SX1262 this reduces the power consumption significantly. This assumes that the hardware actually has the inductor for the internal DC/DC regulator populated which is very likely. Even if not, it won't hurt. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Florent	838e83b3b5	xiao_s3: relocate serial pins on repeater_bridge_rs232 * conflicts with i2c pins that are documented on the same pins * this is a commented target	7 months ago
Florent	3dd6dc02ea	xiao_s3: use environment sensor manager and add sensor role	7 months ago
taco	bc2256f232	Keepteen LT1: remove terminal_chat and sensor targets	7 months ago
taco	2058af8453	initial support: Keepteen LT1	7 months ago
liquidraver	b0ce00652f	Fix RAK4631 GPS UART pin macros	7 months ago
Tomas P	a0bf66f9d8	Fix for display not coming on after poweron	7 months ago
Tomas P	429f82106b	tweak getBattMilliVolts to report battery more accurately	7 months ago
Tomas P	c0a51aff66	change ADC_MULTIPLIER to better reflect battery voltage	7 months ago
recrof	04c0c40b39	set max contacts to 350 and channels to 40 for esp32c3, s3 and c6	7 months ago
David Hall	c3dbec41ba	Fix manufacturer name on Seeed Xiao S3 WIO	7 months ago
David Hall	5c80334dbd	Fix manufacturer name on Seeed Xiao S3 WIO	7 months ago
ViezeVingertjes	5088444f85	Update Wio WM1110 configuration to disable GPS and clean up location provider code	7 months ago
liquidraver	f3b20d5e70	t114 gps	7 months ago
recrof	4aef696620	missed one definition	7 months ago
recrof	377f9ff67d	renamed esp32c6 variants, so they are not included in release. added disclaimer about pioarduino builds	7 months ago
recrof	1c052d8ad2	use different strategy in renaming the envs in order to avoid building	7 months ago
recrof	1bbc2151f1	remove vision master boards because of issues with display drivers	7 months ago
WattleFoxxo	d4eb04d6e9	Switch xiao rp2040 to std init	7 months ago
Scott Powell	dfb4497c7a	* T114: enabled GPS page in UITask	8 months ago
kallanreed	8ca3ed28cf	set PIN_GPS_EN in wismesh tag companion	8 months ago
liquidraver	0920dc6663	Fix reversed GPS PINs on G2 and enable timesync	8 months ago
ViezeVingertjes	ec05d40b3c	Add Seeed Wio WM1110 Dev Board variant	8 months ago
taco	5d495d505a	Revert Heltec T114 power savings As discussed on discord with @recrof people are having issues, possibly due to these changes. See https://github.com/meshcore-dev/MeshCore/issues/746 This reverts commit `a16e011bd2`.	8 months ago
Tomas P	31b8f7252a	Support for Elecrow Thinknode M2	8 months ago
recrof	a5070077ba	equalize RAK with all other nrf52 variants and use newer platform with all important fixes	8 months ago
Florent	ce70792309	lgfx_display: better handle display class construction	8 months ago
Florent	7d62a27836	uitask: bring back buzzer toggle on tracker l1	8 months ago
Florent	f085a9d6c5	tracker_l1_eink: set UI_HAS_JOYSTICK	8 months ago
Florent	3210475f35	CommonCli: Remove dependency on target.h	8 months ago
Scott Powell	cd920693ec	* UITask: new UI_HAS_JOYSTICK * MomentaryButton: new constructor 'multiclick' param * WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI	8 months ago
recrof	c6e5d5021e	fix: remove VL53L0X because it causes bootloops on esp32c3	8 months ago
recrof	69cddbca4e	move LilyGoTLoraBoard.h to variants, use template in platformio.ini, cleanup	8 months ago
recrof	7cb2e0863a	move StationG2Board.h to variants, enable ESM, add companion wifi, cleanup	8 months ago
recrof	1979517381	heltec v2 cleanup	8 months ago
recrof	c4a2b13930	moved HeltecV3Board.h to variant folder	8 months ago
recrof	4dc3dda2d8	xiao c3: migrated to esm, added missing roles, cleanup	8 months ago
Quency-D	70ac820594	add heltec tracker v2 board.	8 months ago
Rastislav Vysoky	8a2e4721d1	heltec wireless tracker: use `-D ARDUINO_USB_CDC_ON_BOOT=1` with all envs repeater and room server envs did not have arduino cdc flag enabled which resulted in broken serial.	8 months ago
Bill Plein	b588e3f1e3	Ikoka Nano Variant Created as a fork of the ikoka stick variant. - Updated for Ikoka Nano legacy pinout - Removed display support - Removed user button support - Retains I2C sensor support Tested with the ebytes E22 30W module, companion-ble and repeater firmware versions, with an I2C INA3221 power sensor.	8 months ago
ViezeVingertjes	da7b8ad669	Add powerOff support for MeshPocket	8 months ago
Sebastian Muszynski	601479e572	Introduce Heltec_WSL3_companion_radio_wifi target	8 months ago
João Brázio	13a0202062	Add BRIDGE_DEBUG flag	8 months ago

1 2 3 4 5 ...

724 Commits (7723a4cb34e5a8b380e378fb2c2170975dc85efe)