MeshCore

Commit Graph

Author	SHA1	Message	Date
Frieder Schrempf	7723a4cb34	variants: Heltec T114: Enable DC/DC regulator According to the documentation and experiments on other boards using NRF52 + SX1262 this reduces the power consumption significantly. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Jaroslav Škarvada	32d622d969	variants: Heltec T114: Disable LED and GPS when powering off This should reduce power consumption in hibernation. Signed-off-by: Jaroslav Škarvada <[email protected]>	7 months ago
Frieder Schrempf	5235516dc7	variants: XIAO NRF52: Enable status LED Fix the active state of the LEDs (active low) and enable the status LED. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	048bd268a1	companion: ui: Respect LED_STATE_ON for status LED The current logic only works for active high LEDs. Some boards need an active low level control and therefore they set LED_STATE_ON to 0. Take this into account and use the correct LED pattern for both cases. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	4a8dcb4906	variants: XIAO NRF52: Support power-off via user button Add the necessary code to properly power-off the Xiao + Wio companions. This way we can achieve around 15 microamps of power consumption in the off state. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	c76d337a00	variants: XIAO NRF52: Enable user button The Xiao nRF52840 combined with the Wio-SX1262 is often used for cheap and compact DIY companion nodes. The Wio actually has an onboard pushbutton that can be used as user button. Enable support for the button. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	11f119a7fb	variants: XIAO NRF52: Enable DC/DC regulator This reduces the power consumption by approximately 25%. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	b9b82fcf1b	variants: WisMesh Tag: Enable status LED Use the blue LED as status LED. This prevents the blue LED from being always-on and draining the battery. Instead use it as status LED with blink patterns as other companion devices do. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	0f565323a0	variants: WisMesh Tag: Enable DC/DC regulator According to the documentation and experiments on other boards using NRF52 + SX1262 this reduces the power consumption significantly. This assumes that the hardware actually has the inductor for the internal DC/DC regulator populated which is very likely. Even if not, it won't hurt. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Jaroslav Škarvada	07e7e2d44b	companion: Suspend radio when hibernating This should significantly reduce power consumption in hibernation. Fixes: #1014 Signed-off-by: Jaroslav Škarvada <[email protected]> Signed-off-by: Frieder Schrempf <[email protected]> # generalize for all radios and UIs	7 months ago
ripplebiz	f5a56c537f	Merge pull request #1113 from recrof/bme280_fix fix: make bme280 sensor usable again	7 months ago
recrof	88a6141943	fix: move bme680 detection before bme280	7 months ago
ripplebiz	459169e8cb	Merge pull request #1092 from liquidraver/rakgps Fix RAK4631 GPS UART pin macros for L76K to work	7 months ago
ripplebiz	caf421b591	Merge pull request #1106 from oltaco/keepteen-lt1 Add support for Keepteen LT1	7 months ago
Florent	838e83b3b5	xiao_s3: relocate serial pins on repeater_bridge_rs232 * conflicts with i2c pins that are documented on the same pins * this is a commented target	7 months ago
Florent	3dd6dc02ea	xiao_s3: use environment sensor manager and add sensor role	7 months ago
taco	bc2256f232	Keepteen LT1: remove terminal_chat and sensor targets	7 months ago
taco	2058af8453	initial support: Keepteen LT1	7 months ago
ripplebiz	8dbb0f5f23	Merge pull request #1071 from tpp-at-idx/thinknode_m2 Thinknode_M2: better battery reading accuracy and no display on powerup fix	7 months ago
ripplebiz	ff67c786ef	Merge pull request #985 from liquidraver/dev3 Fix reversed GPS PINs on G2 and enable timesync	7 months ago
ripplebiz	11a0bd6ef1	Merge pull request #1035 from liquidraver/devt114 Add Heltec T114 GPS + timesync	7 months ago
Liam Cottle	9bfbb777a1	Merge pull request #1100 from stphnrdmr/dev Allow SF smaller than 7 to be saved	7 months ago
Stephan Rodemeier	16c294ce60	Allow SF smaller than 7 to be saved	7 months ago
Scott Powell	91e9fcea4b	* ver 1.10.0	7 months ago
fdlamotte	750e955f19	Update library.json to latest libs and version	7 months ago
ripplebiz	a5cdc88fe2	Merge pull request #1064 from recrof/esp_contacts_350_channels_40 set max contacts to 350 and channels to 40 for esp32c3, s3 and c6	7 months ago
ripplebiz	ba6b8535c9	Merge pull request #971 from fdlamotte/remove_set_setting_by_key SensorManager: remove setSettingByKey	7 months ago
liquidraver	b0ce00652f	Fix RAK4631 GPS UART pin macros	7 months ago
Florent	90e26129ee	Merge branch 'dev' into remove_set_setting_by_key	7 months ago
Scott Powell	b59d1999e6	* Sensor: DISCOVER_REQ, prefix_only support	7 months ago
ripplebiz	74f136ba7a	Merge pull request #1068 from fdlamotte/sensor_control_data sensor: copy control data code from repeater	7 months ago
Scott Powell	ab0721d6df	* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.	7 months ago
Scott Powell	b31d3e7b5f	* added StrHelper::fromHex()	7 months ago
Tomas P	a0bf66f9d8	Fix for display not coming on after poweron	7 months ago
Tomas P	429f82106b	tweak getBattMilliVolts to report battery more accurately	7 months ago
Tomas P	c0a51aff66	change ADC_MULTIPLIER to better reflect battery voltage	7 months ago
Scott Powell	1520f4d28e	* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses	7 months ago
Scott Powell	62d7ce110b	* packet format docs updated	7 months ago
Scott Powell	28b90c18cf	Merge branch 'transportcodes' into dev	7 months ago
Scott Powell	963290ea15	* repeater: various "region" CLI changes * transport codes 0000 and FFFF reserved	7 months ago
Florent	06825030e5	sensor: copy control data code from repeater	7 months ago
Scott Powell	2e63499ae5	* companion: protocol ver bumped to 8.	7 months ago
Scott Powell	4a5404d997	* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA	7 months ago
Scott Powell	ddac13ae80	* repeater: CLI, added "region put" and "region remove" commands	7 months ago
Scott Powell	256848208d	* repeater: onAnonDataRecv(), future code check bug fix (offset 4) * sensor: onAnonDataRecv(), future request code provision	7 months ago
Scott Powell	09eab330a2	* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes) * repeater: DISCOVER requests now with a simple RateLimiter (max 4, every 2 minutes)	7 months ago
Scott Powell	cf547da857	* RegionMap: get/set Home Region * repeater: admin CLI, changed "allowf ", "denyf ", added "home"	7 months ago
ripplebiz	a9d245fe68	Merge pull request #1038 from adam2872/Analogue-button-fix-for-new-UI Analogue user button fix for new UI	7 months ago
ripplebiz	23783b27c8	Merge pull request #1058 from dotdavid/dev Fix Xiao S3 WIO board name	7 months ago
Scott Powell	7419ed71f7	* region filtering now applied in allowPacketForward()	7 months ago

1 2 3 4 5 ...

1935 Commits (7723a4cb34e5a8b380e378fb2c2170975dc85efe) All Branches Search

1935 Commits (7723a4cb34e5a8b380e378fb2c2170975dc85efe)

All Branches