MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	3751785400	* version 1.15.0	2 months ago
Scott Powell	77d02e844f	* bug fix	2 months ago
Scott Powell	df1e12de3e	* Repeater, room server: rule change for sendFloodReply()	2 months ago
Scott Powell	d2fdd6fad4	* companion: FIRMWARE_VER_CODE now bumped to 11	2 months ago
Scott Powell	4131a455a2	* repeater: refactored 'region' CLI commands -> CommonCLI * room server: added RegionMap, and new CommonCLI wiring, default_scope handling * sensor: only minimal RegionMap wiring. Still needs work to handle default-scope	2 months ago
Scott Powell	569cfe177a	* repeater: default-scope support	2 months ago
Scott Powell	efdd2b6a6c	* companion: simplified the CMD_GET / CMD_SET _DEFAULT_FLOOD_SCOPE	2 months ago
Scott Powell	d131e8ae35	* companion: RegionMap now used in Datastore * companion: new CMD_SET_DEFAULT_FLOOD_SCOPE * support for regional builds with DEFAULT_REGION_SCOPE	2 months ago
Scott Powell	3b32f35288	* Companion: default scope	2 months ago
Wessel Nieboer	0a13ac7fc7	Default button polarity to active-LOW across all firmware types Nearly all LoRa boards use a boot button that pulls to ground when pressed.	4 months ago
terminalvelocity23	08de3fb01f	Make sendNodeDiscoverReq() public for post-boot discovery	2 months ago
Scott Powell	2325973fec	* Companion: applyGPSPrefs() now just in one place (moved out of UITask)	2 months ago
Alejandro Ramirez	f8dbdce6bb	fix: apply persisted GPS enabled setting on boot for companion radio The companion_radio example was not restoring the GPS enabled/disabled preference from flash after reboot. The preference was being saved correctly when toggled via the mobile app, but on boot, sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false and nothing subsequently restored the persisted state. Added applyGpsPrefs() (matching the pattern in simple_repeater, simple_sensor, and simple_room_server) and call it from main.cpp after sensors.begin() to ensure the GPS hardware is initialized before the saved preference is applied.	3 months ago
liamcottle	1d61df72c3	add define for reserved group data type	2 months ago
liamcottle	c78f7133c9	reorder command args	2 months ago
liamcottle	ed326255d5	add support for direct paths when sending group data	2 months ago
Rastislav Vysoky	285fc685c5	allow to set lower LoRa frequency	2 months ago
Scott Powell	467959cc3b	* version 1.14.1	3 months ago
Janez T	2f68769185	fix: Widen grp data type ref: #1928	3 months ago
Janez T	1fb26e7623	fix: Drop grp data timestamp ref: #1928	3 months ago
Janez T	f25d7a882a	fix: Align channel data framing ref: #1928	3 months ago
Janez T	a21b83b127	fix: address comments ref:	3 months ago
Janez T	9b84278607	feat: Add support for PAYLOAD_TYPE_GRP_DATA Docs changes are to reflect how it is currently in fw This adds ability to send datagram data to everyone in channel	3 months ago
Orum	b4b66521b6	Add MCU temperature to telemetry responses from room servers.	3 months ago
Scott Powell	fcfdc5fc5b	* Repeater and Room Server: flood advert timer now uses the path_hash_mode pref	3 months ago
Scott Powell	3fe2dd7f48	* ver 1.14.0	3 months ago
João Brázio	3e7fb4add1	Add setRxBoostedGain method declaration and implementation for SX1262/SX1268	3 months ago
João Brázio	9a95e25ef2	Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants	3 months ago
João Brázio	f858f2e4bb	Rename sx126x_rx_boosted_gain to rx_boosted_gain	3 months ago
Scott Powell	5684b4f1b8	* LOOP_DETECT_MODERATE bug fix	3 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Wouter Bijen	1d190ad944	Clamp max_hops to 64 to cover full protocol hop range (0-63)	3 months ago
Wouter Bijen	2cb08775c0	Clarify comment wording: 1 = direct (0 hops) Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	c016db86d5	Address PR review: subtract-1 encoding and clamp max_hops - Change > to >= so stored value 1 means direct/0-hop only (liamcottle) - Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl) - Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	00566741f6	Add configurable max hops filter for auto-add contacts Filter auto-add of new contacts by hop count (issues #1533, #1546). Setting is configurable from the companion app via extended CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops). Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	3 months ago
Specter242	e08dcbdd03	sensecap solar: stabilize wake pin and add button hold poweroff	3 months ago
Wessel Nieboer	8bf63256b6	Fix remote LNA toggle bugs: correct register comparison, add missing implementations, wire up companion radio getRxBoostedGain was returned true because both 0x94 (power saving) and 0x96 (boosted gain = 1) return true	3 months ago
Scott Powell	b14879ce2d	* CMD_GET_ADVERT_PATH bug fix	3 months ago
Scott Powell	9d5c4865c3	* room server fix	3 months ago
Scott Powell	213d085012	* revert CMD_SEND_SELF_ADVERT, use _prefs.path_hash_mode	3 months ago
Scott Powell	5b0884ad2d	* added CMD_SET_PATH_HASH_MODE	3 months ago
Scott Powell	e52d57c065	* companion: new pref: path_hash_mode (0..2) * companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode * companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)	3 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	3 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	4 months ago
Scott Powell	2e00298128	* companion: retransmit delays now hard-coded (only for client repeat mode)	4 months ago
Scott Powell	5de3e1bf32	* repeater: slight increase to default direct.txdelay	4 months ago
3DPGG	3e53df5082	Fix LilyGo_TLora_V2_1_1_6_terminal_chat build This change addresses two issues. The first is that the LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile simple_repeater/MyMesh.cpp. All other examples of terminal chat targets are instead building simple_secure_chat/main.cpp . This change would align this build to the rest of the builds. The second issue, found during the course of investigating the first, stems from simple_repeater/MyMesh.cpp using the MAX_NEIGHBOURS #define to control whether the neighbor list is kept. Repeaters that keep this list must define this value, and if the value is not defined, then all neighbor-related functionality is compiled out. However, the code that replies to REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define, and thus any target that compiles simple_repeater/MyMesh.cpp without defining MAX_NEIGHBOURS would get an undefined variable compilation error. As a practical matter though, there are no targets that compile simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS, except this build due to the first issue. As a result, the second issue is addressed only as a matter of completeness. The expected behavior with this change is that such a repeater would send a valid reply indicating zero known neighbors.	4 months ago
realtag	0770618ee2	Allow repeater discovery even if repeater mode is disabled on the requesting repeater.	4 months ago
realtag	bf9c6cb50f	Increased the timeout timer to 60 seconds, up from 30 seconds.	4 months ago

1 2 3 4 5 ...

802 Commits (68360157ecee382e6221d593724e473dd47cede5)