allow to set lower LoRa frequency

examples/companion_radio/MyMesh.cpp

@@ -292,7 +292,7 @@ bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
   if ((_prefs.manual_add_contacts & 1) == 0) {
     return true;
   }
-  
+
   uint8_t type_bit = 0;
   switch (contact_type) {
     case ADV_TYPE_CHAT:
@@ -310,7 +310,7 @@ bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
     default:
       return false;  // Unknown type, don't auto-add
   }
-  
+
   return (_prefs.autoadd_config & type_bit) != 0;
 }
 
@@ -859,7 +859,7 @@ void MyMesh::begin(bool has_display) {
   // sanitise bad pref values
   _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
   _prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f);
-  _prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f);
+  _prefs.freq = constrain(_prefs.freq, 150.0f, 2500.0f);
   _prefs.bw = constrain(_prefs.bw, 7.8f, 500.0f);
   _prefs.sf = constrain(_prefs.sf, 5, 12);
   _prefs.cr = constrain(_prefs.cr, 5, 8);
@@ -1264,7 +1264,7 @@ void MyMesh::handleCmdFrame(size_t len) {
 
     if (repeat && !isValidClientRepeatFreq(freq)) {
       writeErrFrame(ERR_CODE_ILLEGAL_ARG);
-    } else if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
+    } else if (freq >= 150000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
         bw <= 500000) {
       _prefs.sf = sf;
       _prefs.cr = cr;
@@ -1620,7 +1620,7 @@ void MyMesh::handleCmdFrame(size_t len) {
   } else if (cmd_frame[0] == CMD_SEND_TRACE_PATH && len > 10 && len - 10 < MAX_PACKET_PAYLOAD-5) {
     uint8_t path_len = len - 10;
     uint8_t flags = cmd_frame[9];
-    uint8_t path_sz = flags & 0x03;  // NEW v1.11+ 
+    uint8_t path_sz = flags & 0x03;  // NEW v1.11+
     if ((path_len >> path_sz) > MAX_PATH_SIZE || (path_len % (1 << path_sz)) != 0) { // make sure is multiple of path_sz
       writeErrFrame(ERR_CODE_ILLEGAL_ARG);
     } else {
@@ -1927,7 +1927,7 @@ void MyMesh::checkCLIRescueCmd() {
 
       // get path from command e.g: "cat /contacts3"
       const char *path = &cli_command[4];
-      
+
       bool is_fs2 = false;
       if (memcmp(path, "UserData/", 9) == 0) {
         path += 8; // skip "UserData"

src/helpers/CommonCLI.cpp

@@ -95,7 +95,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->tx_delay_factor = constrain(_prefs->tx_delay_factor, 0, 2.0f);
     _prefs->direct_tx_delay_factor = constrain(_prefs->direct_tx_delay_factor, 0, 2.0f);
     _prefs->airtime_factor = constrain(_prefs->airtime_factor, 0, 9.0f);
-    _prefs->freq = constrain(_prefs->freq, 400.0f, 2500.0f);
+    _prefs->freq = constrain(_prefs->freq, 150.0f, 2500.0f);
     _prefs->bw = constrain(_prefs->bw, 7.8f, 500.0f);
     _prefs->sf = constrain(_prefs->sf, 5, 12);
     _prefs->cr = constrain(_prefs->cr, 5, 8);
@@ -275,7 +275,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       uint8_t sf  = num > 2 ? atoi(parts[2]) : 0;
       uint8_t cr  = num > 3 ? atoi(parts[3]) : 0;
       int temp_timeout_mins  = num > 4 ? atoi(parts[4]) : 0;
-      if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
+      if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
         _callbacks->applyTempRadioParams(freq, bw, sf, cr, temp_timeout_mins);
         sprintf(reply, "OK - temp params for %d mins", temp_timeout_mins);
       } else {
@@ -535,7 +535,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         float bw    = num > 1 ? strtof(parts[1], nullptr) : 0.0f;
         uint8_t sf  = num > 2 ? atoi(parts[2]) : 0;
         uint8_t cr  = num > 3 ? atoi(parts[3]) : 0;
-        if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
+        if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
           _prefs->sf = sf;
           _prefs->cr = cr;
           _prefs->freq = freq;
@@ -720,7 +720,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       }
     } else if (memcmp(command, "sensor set ", 11) == 0) {
       strcpy(tmp, &command[11]);
-      const char *parts[2]; 
+      const char *parts[2];
       int num = mesh::Utils::parseTextParts(tmp, parts, 2, ' ');
       const char *key = (num > 0) ? parts[0] : "";
       const char *value = (num > 1) ? parts[1] : "null";
@@ -743,7 +743,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         dp = strchr(dp, 0);
         int i;
         for (i = start; i < end && (dp-reply < 134); i++) {
-          sprintf(dp, "%s=%s\n", 
+          sprintf(dp, "%s=%s\n",
             _sensors->getSettingName(i),
             _sensors->getSettingValue(i));
           dp = strchr(dp, 0);
@@ -823,8 +823,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         bool active = !strcmp(_sensors->getSettingByKey("gps"), "1");
         if (enabled) {
           sprintf(reply, "on, %s, %s, %d sats",
-            active?"active":"deactivated", 
-            fix?"fix":"no fix", 
+            active?"active":"deactivated",
+            fix?"fix":"no fix",
             sats);
         } else {
           strcpy(reply, "off");