MeshCore

Commit Graph

Author	SHA1	Message	Date
Janez T	2f68769185	fix: Widen grp data type ref: #1928	3 months ago
Janez T	1fb26e7623	fix: Drop grp data timestamp ref: #1928	3 months ago
Wessel Nieboer	1f48d2b869	Address comments	3 months ago
Janez T	f25d7a882a	fix: Align channel data framing ref: #1928	3 months ago
Janez T	a21b83b127	fix: address comments ref:	3 months ago
Janez T	9b84278607	feat: Add support for PAYLOAD_TYPE_GRP_DATA Docs changes are to reflect how it is currently in fw This adds ability to send datagram data to everyone in channel	4 months ago
Wessel Nieboer	0e62240119	Set AUTO_OFF_MILLIS to 0 for E213, E290	3 months ago
Wessel Nieboer	696323c11b	Fix Heltec E213 and E290 e-ink board builds	4 months ago
Wessel Nieboer	9af332b6e6	Make sure LR1110 builds	3 months ago
kelsey hudson	a56419dc21	R1 Neo: Turn off debugging, rtc cleanup	3 months ago
Wessel Nieboer	3c0d186569	Fix memcp compare length off by one Co-authored-by: ViezeVingertjes <[email protected]>	3 months ago
Wessel Nieboer	e3afbf975e	Prevent auto-restarting BLE when disabling it on nRF52 If client is still connected, client would automatically reconnect immediately thus keeping BLE on fixes #1933	3 months ago
Wessel Nieboer	f6338430f8	Add get/set dutycycle command We translate to af internally, it's easier to store and doesn't break stored prefs. Made get/set af command show deprecated, but it still works fine.	3 months ago
kelsey hudson	5d1f5139ae	Support for muzi works R1 Neo device. Support for R1 Neo hardware. New variant and baseboard class. * Known issues: - power management is not currently supported - power off via long button press is not implemented Add support for Epson Seiko RX8130CE I2C Real-time clock.	3 months ago
Scott Powell	2715d3a113	* Dispatcher::next_tx_time init fix	3 months ago
overkillfpv	a434f9eff5	simplified the calls	3 months ago
overkillfpv	6fd8c28522	Cache preamble SF to avoid redundant setPreambleLength() on every TX	3 months ago
Quency-D	cdca79540f	Update Heltec Tracker v2 to version KCT8103L.	3 months ago
João Brázio	9a95e25ef2	Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants	4 months ago
João Brázio	f858f2e4bb	Rename sx126x_rx_boosted_gain to rx_boosted_gain	4 months ago
overkillfpv	a61add2e6a	Update preamble dynamically to match runtime SF changes via CLI	4 months ago
overkillfpv	534a0c97a7	Increased preamble to 32 for <sf9 and left at 16 for sf9 and above	4 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	4 months ago
Wessel Nieboer	10f2fecd45	Sync time with GPS every 30 minutes Unless your GPS is being spoofed there isn't really a downside to syncing more often with GPS. I understand the RTC is very stable, but especially with powersaving now clock drift is worse, we should sync more often.	5 months ago
Wouter Bijen	2cb08775c0	Clarify comment wording: 1 = direct (0 hops) Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Wouter Bijen	c016db86d5	Address PR review: subtract-1 encoding and clamp max_hops - Change > to >= so stored value 1 means direct/0-hop only (liamcottle) - Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl) - Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Wouter Bijen	00566741f6	Add configurable max hops filter for auto-add contacts Filter auto-add of new contacts by hop count (issues #1533, #1546). Setting is configurable from the companion app via extended CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops). Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Daniel Novak	0d87dcc989	Also fix countBefore(0xFFFFFFFF) to return _num The signed comparison in countBefore breaks for the max uint32_t value. Even though callers now use getOutboundTotal(), the function itself should be correct for all inputs.	4 months ago
Wessel Nieboer	8a9a0dca5f	Fix GPS +8mA power leak when disabled (nRF52) On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN. MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3 rail) but stop() never set it back LOW, leaving the GPS module powered even when disabled. Assert reset pin in stop() to mirror begin(), and guard _location->loop() behind gps_active check. Fixes meshcore-dev/MeshCore#1628	4 months ago
Wessel Nieboer	9bae9d0ed2	fix comment, we know the band now after checking LR1110 user manual	4 months ago
Wessel Nieboer	85f764a114	Calibrate configured frequency for AGC reset	4 months ago
Wessel Nieboer	f54948e06d	Also implement LR11x10 AGC reset Similar to SX126x but simpler.	4 months ago
Wessel Nieboer	b2032e11b6	make it more dry	4 months ago
Wessel Nieboer	9106ab46e1	reset noise_floor sampling after agc reset	4 months ago
Wessel Nieboer	a2dc2eb50c	when doing AGC reset, call Calibrate(0x7F) 1. warm sleep 2. wake to stdby 3. Calibrate(0x7F) to reset all internal blocks 4. re-apply DIO2 RF / boosted gain & register patch to make sure everything is as it was	4 months ago
Wessel Nieboer	f81ec4b14c	fix agc reset	4 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	4 months ago
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	4 months ago
Daniel Novak	c436bd42c5	Fix countBefore sentinel regression from millis wraparound fix PR #1795 changed PacketQueue::countBefore() to use signed 2's complement arithmetic for millis wraparound safety. However, this broke the 0xFFFFFFFF sentinel pattern used by callers to mean "count all packets regardless of schedule". With the signed comparison, countBefore(0xFFFFFFFF) always returns 0, causing hasPendingWork() to report false and repeaters to sleep with packets still queued. Stats reporting also shows queue_len as 0. Add an early-return for the sentinel value before the loop, and document the sentinel convention on the virtual interface and implementation.	4 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	4 months ago
Specter242	e323755990	sensecap solar: add poweroff command and board power/LED parity	4 months ago
Scott Powell	b67decfba0	* bug fix: Packet::writeTo(), Packet::readFrom()	4 months ago
lincomatic	557d714c3c	don't limit bridge_baud to 115200	4 months ago
Scott Powell	8737c64fdb	* Packet::copyPath() fix	4 months ago
Wessel Nieboer	8bf63256b6	Fix remote LNA toggle bugs: correct register comparison, add missing implementations, wire up companion radio getRxBoostedGain was returned true because both 0x94 (power saving) and 0x96 (boosted gain = 1) return true	4 months ago
Scott Powell	45564bad9b	* Dispatcher bug fixes	4 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	4 months ago
Daniel Novak	011edd3c99	Fix millis() wraparound in PacketQueue time comparisons PacketQueue::countBefore() and PacketQueue::get() use unsigned comparison (_schedule_table[j] > now) to check if a packet is scheduled for the future. This breaks when millis() wraps around after ~49.7 days: packets scheduled just before the wrap appear to be in the far future and get stuck in the queue. Use signed subtraction instead, matching the approach already used by Dispatcher::millisHasNowPassed(). This correctly handles the wraparound for time differences up to ~24.8 days in either direction, well beyond the maximum queue delay of 32 seconds.	4 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	4 months ago
Kevin Le	39fb2902ec	Avoid negative _claims	4 months ago

1 2 3 4 5 ...

957 Commits (t-impulse-ui)