Merge pull request #2126 from recrof/allow-lower-freq

Allow to set lower LoRa frequency

examples/companion_radio/MyMesh.cpp

@@ -859,7 +859,7 @@ void MyMesh::begin(bool has_display) {
   // sanitise bad pref values
   _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
   _prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f);
-  _prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f);
+  _prefs.freq = constrain(_prefs.freq, 150.0f, 2500.0f);
   _prefs.bw = constrain(_prefs.bw, 7.8f, 500.0f);
   _prefs.sf = constrain(_prefs.sf, 5, 12);
   _prefs.cr = constrain(_prefs.cr, 5, 8);
@@ -1264,7 +1264,7 @@ void MyMesh::handleCmdFrame(size_t len) {
 
     if (repeat && !isValidClientRepeatFreq(freq)) {
       writeErrFrame(ERR_CODE_ILLEGAL_ARG);
-    } else if (freq >= 300000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
+    } else if (freq >= 150000 && freq <= 2500000 && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 &&
         bw <= 500000) {
       _prefs.sf = sf;
       _prefs.cr = cr;

src/helpers/CommonCLI.cpp

@@ -95,7 +95,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->tx_delay_factor = constrain(_prefs->tx_delay_factor, 0, 2.0f);
     _prefs->direct_tx_delay_factor = constrain(_prefs->direct_tx_delay_factor, 0, 2.0f);
     _prefs->airtime_factor = constrain(_prefs->airtime_factor, 0, 9.0f);
-    _prefs->freq = constrain(_prefs->freq, 400.0f, 2500.0f);
+    _prefs->freq = constrain(_prefs->freq, 150.0f, 2500.0f);
     _prefs->bw = constrain(_prefs->bw, 7.8f, 500.0f);
     _prefs->sf = constrain(_prefs->sf, 5, 12);
     _prefs->cr = constrain(_prefs->cr, 5, 8);
@@ -275,7 +275,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       uint8_t sf  = num > 2 ? atoi(parts[2]) : 0;
       uint8_t cr  = num > 3 ? atoi(parts[3]) : 0;
       int temp_timeout_mins  = num > 4 ? atoi(parts[4]) : 0;
-      if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
+      if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
         _callbacks->applyTempRadioParams(freq, bw, sf, cr, temp_timeout_mins);
         sprintf(reply, "OK - temp params for %d mins", temp_timeout_mins);
       } else {
@@ -535,7 +535,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         float bw    = num > 1 ? strtof(parts[1], nullptr) : 0.0f;
         uint8_t sf  = num > 2 ? atoi(parts[2]) : 0;
         uint8_t cr  = num > 3 ? atoi(parts[3]) : 0;
-        if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
+        if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
           _prefs->sf = sf;
           _prefs->cr = cr;
           _prefs->freq = freq;