MeshCore

Commit Graph

Author	SHA1	Message	Date
Ermanno Baschiera	ea81f816b8	Merge `adb93565e0` into `6e39cff8a1`	2 days ago
Ermanno Baschiera	adb93565e0	Power off ThinkNode M3: wake on button, cut peripheral rails The long press already reached board.powerOff(), but nothing armed a wake source, so the board stayed dead until a reset or a USB reconnect. Arm the user button (pull-up + SENSE_LOW) before entering SYSTEMOFF, after waiting for the release: SENSE is level triggered and a still pressed button wakes the board up immediately. If the button is never released, reboot instead: SYSTEMOFF would wake up right away anyway, so make the reset explicit. GPIO output latches survive SYSTEMOFF, so shut the switched rails down as well (GNSS, RGB led supply, EEPROM, battery divider, EN1/EN2, PWR_EN), in a shutdownPeripherals() override so they go down after the radio and the GNSS receiver. Give pins 36 and 34 a name while there. Tested on a ThinkNode M3 companion_radio_ble: a long press powers the board off (the USB device disappears and stays away), a short press brings it back, and holding the button past the timeout reboots.	2 days ago
ripplebiz	6e39cff8a1	Merge pull request #3063 from oltaco/unify-irq-timeout Unify IRQ timeout logic across all applicable radio types	2 days ago
ripplebiz	279ac78122	Merge pull request #3049 from liamcottle/feature/ethernet Refactor Companion Interfaces + Add ThinkNode M7 Ethernet Support	2 days ago
taco	79eb7f5d8d	LLCC68: add IRQ timeout logic	2 days ago
taco	a3732e1c65	SX1268: add IRQ timeout logic	2 days ago
taco	a5c323cc19	STM32WLx: add IRQ timeout logic	2 days ago
taco	a7426de0bf	LR1110: fix unnecessary IRQ clear	2 days ago
ripplebiz	9f73fbf870	Merge pull request #3062 from oltaco/fix-irq-clear Fix unnecessary IRQ clearing	2 days ago
taco	20f55a4f42	fix unnecessary IRQ clear	2 days ago
Liam Cottle	adc631f315	Merge pull request #3048 from entr0p1/fix/startota-failure-recovery nRF52840 "start ota" Failure Recovery	3 days ago
entr0p1	4050b7d526	nRF52840 "start ota" Failure Recovery If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt. Fixes: - Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.	4 days ago
liamcottle	dd778e2189	fix bluetooth toggle on ui tiny	4 days ago
liamcottle	e7f2c71701	usb companion firmwares now require build flag to include usb interface	4 days ago
liamcottle	834ad722a4	remove old rak ethernet interface	4 days ago
liamcottle	203fd4e407	refactor rak13800 to new ethernet interface class	4 days ago
liamcottle	e672679d6e	refactored companion interfaces to allow for multiple active connection modes	2 weeks ago
liamcottle	b4143a4402	rename class	2 weeks ago
liamcottle	5de857f8f8	initial ch390 ethernet support for thinknode m7 companion	2 weeks ago
ripplebiz	c86e63d2f5	Merge pull request #2982 from meshcore-dev/config-serializer Config serializer	4 days ago
ripplebiz	301bc10dd3	Merge pull request #3034 from meshcore-dev/ui-color-refactor UI color refactor	4 days ago
Liam Cottle	cee6d94894	Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting Increase header levels on "Payloads" documentation page to fix table of contents	4 days ago
Talia	b62b421456	docs: increase header levels on payloads page to fix table of contents mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them	5 days ago
ripplebiz	e3de413a69	Merge pull request #3036 from oltaco/add-preamble-irq-flag Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers	7 days ago
taco	6b83de507d	SX1268: add PREAMBLE_DETECTED to reported irq flags	7 days ago
taco	0d2b988f24	STM32WLx: add PREAMBLE_DETECTED to reported irq flags	7 days ago
taco	c56928347f	LLCC68: add PREAMBLE_DETECTED to reported irq flags	7 days ago
taco	ea5d7c8bf5	LR1110: add PREAMBLE_DETECTED to reported irq flags	7 days ago
taco	fae4803158	SX1262: add PREAMBLE_DETECTED to reported irq flags	2 weeks ago
Scott Powell	f83ad03e5e	* T114 display fix	1 week ago
Scott Powell	0c04a47355	* fixed for mono ST7789 display driver	1 week ago
Scott Powell	3857f45826	* monochrome displays now do _not_ invert titlebar	1 week ago
Scott Powell	ee79df4c4f	Merge branch 'dev' into config-serializer # Conflicts: # test/mocks/Arduino.h # test/mocks/Stream.h	1 week ago
Liam Cottle	e780cca237	Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276 Increase LilyGo T-Beam SX1276 channels from 8 to 40	1 week ago
liamcottle	520fa77f4f	increase tbeam sx1276 max group channels from 8 to 40	1 week ago
Liam Cottle	d531a98da1	Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure fix: prevent ESP32 KISS modem stalls under USB backpressure	1 week ago
Liam Cottle	8a69f34101	Merge pull request #3023 from agessaman/fix/rx-boosted-gain fix(room_server): support RX boosted gain	1 week ago
Scott Powell	56274db4ad	* build fixes for old ESP32 boards	1 week ago
Scott Powell	a96a66aa99	* build fixes for NullDisplayDriver	1 week ago
Scott Powell	b8504e55c6	* refactor of Color mapping in UITasks / DisplayDrivers * color displays now with a new light theme	1 week ago
agessaman	a71cc23854	fix(room_server): support RX boosted gain The room server never supported RX boosted gain, while the repeater does. Three consequences on SX1262/SX1268 boards: - boosted gain was never applied to the radio at boot, so a room server ran in power-saving RX mode while an identical repeater ran boosted - a real receive-sensitivity difference with nothing pointing at it - _prefs.rx_boosted_gain was never initialised (the prefs are memset to 0 before defaults are set), so it defaulted to off - 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had already written the value to prefs and saved them, so a stale setting survived reboot and was never applied Mirror the repeater's implementation: initialise the pref default under the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply it during radio init, and override setRxBoostedGain() so the CLI reports success and takes effect. Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server (guards compile out cleanly).	1 week ago
Scott Powell	78240e9477	* optimised: value-init not needed	1 week ago
ripplebiz	4157e43ace	Merge pull request #3005 from axhoff/agent/fix-ble-reconnect Fix bonded BLE reconnects on ESP32	1 week ago
ripplebiz	8b048ab19a	Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue Synchronize the ESP32 BLE receive queue	1 week ago
ripplebiz	6a15e1712b	Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion Enable hardware USB serial on Heltec V4	1 week ago
Liam Cottle	7124fa1439	Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)	1 week ago
Alexander Hoffer	4d4d7c3746	refactor: use FreeRTOS BLE receive queue	1 week ago
=UltimateCodeWarrior	0de2b4fc5f	Move Supreme OLED address to variant config Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.	1 week ago
fdlamotte	d2fd1fdaa6	Merge pull request #2887 from spinda/thinknode-m3-dev Fix GPS and LEDs on ThinkNode M3	2 weeks ago
fdlamotte	427cd7c263	Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals NRF52Board - ShutdownPeripherals() housekeeping	2 weeks ago

1 2 3 4 5 ...

3245 Commits (ea81f816b815f749aeb42345707dc5b0e13d1f87) All Branches Search

3245 Commits (ea81f816b815f749aeb42345707dc5b0e13d1f87)

All Branches