MeshCore

Commit Graph

Author	SHA1	Message	Date
Quency-D	fc61018d4d	Fix the issue of inconsistent I2C usage in the environmental sensor.	5 months ago
Frieder Schrempf	ab7935142c	EnvironmentSensorManager.cpp: Cleanup after failed RAK4631 GPS detection If no GPS was detected, revert the hardware to the initial state, otherwise we may see conflicts or increased power consumption on some boards. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	e79ee11872	EnvironmentSensorManager.cpp: Fix RAK4631 serial GPS detection Serial1 is always true. If we want to check for the presence of a GPS receiver, we need to check if any data was received. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
entr0p1	cc28b1a34d	EnvironmentSensorManager.cpp: Mitigate BME280 self-heating causing inaccurate readings.	6 months ago
agessaman	b91b854a1d	fix output from LPS22HB: convert barometric pressure from kPa to hPa in EnvironmentSensorManager	7 months ago
Scott Powell	d7adcc136b	* LPPDataHelpers, readCurrent() signed value	7 months ago
Christophe Vanlancker	01eb8716af	fix(core): optimize GPS loop and add display GPIO safeguards	7 months ago
csrutil	df3cb3d192	_location->loop() should be in the next tick	7 months ago
csrutil	62e180dc0f	changed ms to sec	7 months ago
csrutil	88fb173297	add configurable GPS update interval Make GPS update interval configurable via settings instead of using hardcoded 1 second value. The interval is persisted from preferences and can be adjusted at runtime through the sensor manager settings interface	7 months ago
Florent	1c0017b634	thinknode_m5: gps support	7 months ago
recrof	88a6141943	fix: move bme680 detection before bme280	8 months ago
Wesley Ellis	4cfbd3bad5	Switch BMP085 mode to 0 for ULTRALOWPOWER	8 months ago
Wesley Ellis	ac15131296	Add support for bmp085/bmp180 temperature/pressure sensor	8 months ago
liquidraver	3c48f01601	BME680 library doesn't have altitude calculation, we can add it here to match other sensors'	9 months ago
liquidraver	0e7486552d	Add simple BME680 support to RAK with adafruit library	9 months ago
Scott Powell	d3be6afccb	* fix for non-RAK targets	9 months ago
Scott Powell	fa8c31be88	* fix for RAK12500 GPS (I2C)	9 months ago
Quency-D	70ac820594	add heltec tracker v2 board.	9 months ago
Florent de Lamotte	341b69e3c9	sensor list command	9 months ago
Florent	e4f2d63b0a	cli_gps: use sensormanger to toggle gps on/off to keep state coherent	9 months ago
Florent	0502bc370d	CommonCLI: gps management commands	9 months ago
fdlamotte	c83abbeff6	ESM: add gps reset after begin	9 months ago
fdlamotte	030f0d5d82	location provider: reduce reset delay	9 months ago
Florent	76aa7cf488	ui_task: initial gps page	9 months ago
Florent	c1915a1133	ESM: delegate gps management to LocationProvider	9 months ago
Florent	611d61b6c6	tracker_l1: fix bme226 init in ESM to include all sensors	9 months ago
Quency-D	669bea04a0	add heltec_v4 board.	9 months ago
Florent	f9543bb7bb	tracker_l1: support for EnvironmentSensorManager	9 months ago
Florent de Lamotte	d83cdc501f	ui: use LPPDataHelper and conditionals for sensors page	10 months ago
csrutil	cf93109cd5	✨ feat: add altitude support to environment sensor node telemetry - Include actual node altitude in GPS telemetry instead of hardcoded 0.0f - Extract altitude data from both ublox_GNSS and serial GPS sources - Update debug logging to display altitude alongside lat/lon coordinates	10 months ago
recrof	d59724acd0	new variant: RAK WisMesh Tag	10 months ago
Alex Wolden	0c37eafd01	Fixed shunt value for ina226	10 months ago
Alex Wolden	c636536599	Add INA226 to rak	11 months ago
Martin Kudlacek	822850b4d5	Support for Sensirion SHT4x	11 months ago
Martin Kudlacek	a96d1022a0	Added support for TI INA260	11 months ago
taco	ef58ef460b	fix: BMP280 altitude was using incorrect library	11 months ago
Mike Cochrane	93802fe250	Add VL53L0X time-of-flight distance sensor to Heltec V3 Sensor	12 months ago
Mike Cochrane	9f2a77c92e	Add Melexis Contact-less Infrared Sensor - MLX90614 to Heltec V3 Sensor	12 months ago
Mike Cochrane	e4f7b9e37f	Allow the SDA and SCL pins for Environment sensors to be configured independantly. Add Heltec V3 Sensor.	12 months ago
cod3doomy	6b4592bfe2	Cleanup and fixes -Added RAK_4631 define back -Added includes for common RAK sensors that are currently supported in ESM -Set global variables to static -Reduced delay time within the RAK gps init sequence	12 months ago
cod3doomy	660ab0692f	RAK4631 ESM Migration Changes to migrate sensor code to the ESM. Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501) Removed the GPS specific envs from platformio.ini and enabled GPS for all envs. Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.	12 months ago
marcelverdult	58cffa8f76	Fixed Barometric Pressure Reading for BMP280 Measurement has to be divided by 100 same as BME280	12 months ago
jasper	7d47608985	Changed the Barometric Pressure value since it was a factor 100 to high	12 months ago
recrof	539f99a90f	removed unsupported(?) readAltitude	1 year ago
recrof	3832836eb2	EnvironmentSensorManager: add support for SHTC3 and LPS22HB	1 year ago
recrof	9530744ff4	add support for BMP280 temperature+pressure sensor	1 year ago
taco	84c2cfdcf2	fix: revert swapped GPS pins reverted GPS pin behaviour and swapped GPS pins for tbeam variants.	1 year ago
cod3doomy	218b96e4aa	T-Beam refactor There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.	1 year ago
taco	83842e4b25	fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off. previously the location would always snap to the last heard GPS location after GPS had been on.	1 year ago

1 2

72 Commits (d81616ec68a8610629073f9635ceb3dbaa5abc48)