MeshCore

Commit Graph

Author	SHA1	Message	Date
Liam Cottle	d531a98da1	Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure fix: prevent ESP32 KISS modem stalls under USB backpressure	1 day ago
Liam Cottle	8a69f34101	Merge pull request #3023 from agessaman/fix/rx-boosted-gain fix(room_server): support RX boosted gain	2 days ago
agessaman	a71cc23854	fix(room_server): support RX boosted gain The room server never supported RX boosted gain, while the repeater does. Three consequences on SX1262/SX1268 boards: - boosted gain was never applied to the radio at boot, so a room server ran in power-saving RX mode while an identical repeater ran boosted - a real receive-sensitivity difference with nothing pointing at it - _prefs.rx_boosted_gain was never initialised (the prefs are memset to 0 before defaults are set), so it defaulted to off - 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had already written the value to prefs and saved them, so a stale setting survived reboot and was never applied Mirror the repeater's implementation: initialise the pref default under the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply it during radio init, and override setRxBoostedGain() so the CLI reports success and takes effect. Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server (guards compile out cleanly).	3 days ago
Scott Powell	78240e9477	* optimised: value-init not needed	4 days ago
ripplebiz	4157e43ace	Merge pull request #3005 from axhoff/agent/fix-ble-reconnect Fix bonded BLE reconnects on ESP32	4 days ago
ripplebiz	8b048ab19a	Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue Synchronize the ESP32 BLE receive queue	4 days ago
ripplebiz	6a15e1712b	Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion Enable hardware USB serial on Heltec V4	4 days ago
Liam Cottle	7124fa1439	Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)	4 days ago
Alexander Hoffer	4d4d7c3746	refactor: use FreeRTOS BLE receive queue	4 days ago
=UltimateCodeWarrior	0de2b4fc5f	Move Supreme OLED address to variant config Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.	4 days ago
fdlamotte	d2fd1fdaa6	Merge pull request #2887 from spinda/thinknode-m3-dev Fix GPS and LEDs on ThinkNode M3	4 days ago
fdlamotte	427cd7c263	Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals NRF52Board - ShutdownPeripherals() housekeeping	4 days ago
Alexander Hoffer	9fd6b419e5	fix: preserve bonded BLE reconnects	4 days ago
Alexander Hoffer	60030469c9	fix: enable Heltec V4 USB serial	4 days ago
Alexander Hoffer	3885c67c8e	fix: synchronize BLE receive queue	4 days ago
Liam Cottle	da67328017	Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn Fix Xiao nRF52840 repeater compile failure	4 days ago
entr0p1	d2bbe4d8d3	Fix Xiao nRF52840 repeater compile failure Compile fails due to user_btn not declared in board target. Fixes: - Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp - Add momentary button helper include in variants/xiao_nrf52/target.h - Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h	5 days ago
Liam Cottle	a45dae928c	Merge pull request #3000 from oltaco/rx-irq-timeout fix: clear the correct IRQ flag for timeout on preamble detected on SX1262	5 days ago
taco	ab5c45f516	fix: clear the correct IRQ flag for timeout on preamble detected	5 days ago
Liam Cottle	c1ee9cad5b	Merge pull request #2998 from oltaco/heltec-t1-bodmer Fix: Heltec t1: add missing bodmer TFT_eSPI library	5 days ago
taco	91e65af9dd	fix: heltec t1: add missing bodmer TFT_eSPI library	5 days ago
Liam Cottle	2834121b6e	Merge pull request #2994 from oltaco/rx-irq-timeout Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110	5 days ago
taco	121b72712b	LR1110: add setter methods for preambleMillis and payloadMillis	5 days ago
taco	ae48072ff0	SX1262: add setter methods for preambleMillis and payloadMillis	5 days ago
Liam Cottle	fdd4d8a610	Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build Fix nRF52 builds broken by unconditional RAK Ethernet include	5 days ago
liamcottle	8c987c8689	Merge remote-tracking branch 'official/main' into dev	5 days ago
ripplebiz	dc7dd5105e	Merge pull request #2977 from oltaco/rx-irq-timeout Add IRQ timeout logic for SX1262 and LR1121	5 days ago
Ryan Gregg	cc221330ba	Fix nRF52 builds: guard SerialEthernetInterface with ETHERNET_ENABLED SerialEthernetInterface.cpp is compiled for every nRF52 target because PlatformIO builds all .cpp files under src/. It includes SerialEthernetInterface.h, which unconditionally pulls in <RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114) fails to build with 'RAK13800_W5100S.h: No such file or directory'. Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they compile to empty translation units on non-Ethernet builds. RAK4631 Ethernet envs define ETHERNET_ENABLED and are unaffected. Fixes #2985	5 days ago
entr0p1	aee53a8c3e	NRF52Board - ShutdownPeripherals() housekeeping Improvements: - Add condition to only turn off display if on (avoids wedging the shutdown on some displays) - Reset LoRa radio before calling radio_driver.powerOff() to ensure it is in a known good state (and will accept the command) - Ensure SPI is started so LoRa radio commands can be sent (some shutdowns can happen before this) - Add gate for P_LORA_NSS pin defined before writing to the pin	5 days ago
taco	b28bf00348	fix: setMaxPacketMillis() should return void	6 days ago
Liam Cottle	a3a1aa5e3b	Merge pull request #1865 from MeshEnvy/fix/python-json-parse-error fix: JSON parsing regression in build.sh	6 days ago
ViezeVingertjes	3b69e7873b	fix: guard HWCDC serial config behind ARDUINO_USB_MODE setTxTimeoutMs() and setTxBufferSize() are HWCDC-only APIs; calling them on HardwareSerial (UART-bridge boards like T-Beam) fails to compile. Co-Authored-By: Adam Gessaman <[email protected]>	4 weeks ago
ViezeVingertjes	39ff5b879a	fix: run KISS modem unit tests in CI via native_kiss_modem env The new test_kiss_modem suite needs KissModem headers and sources that only native_kiss_modem provides. Scope native to test_utils and run both envs in the unit test workflow.	1 month ago
ViezeVingertjes	fb2c61f862	fix: prevent ESP32 KISS modem stalls under USB backpressure Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.	1 month ago
ripplebiz	795989b918	Merge pull request #2966 from Quency-D/heltec-rc32 Add Heltec rc32 board	1 week ago
fdlamotte	4aec46b039	Merge pull request #2976 from fdlamotte/UITask_poweroff_radio_display UI task: poweroff of radio and display moved to board	1 week ago
Florent	c644720ea7	uitask: screen and radio poweroff moved to board	1 week ago
fdlamotte	8f5a393404	Merge pull request #2975 from fdlamotte/nrf52_boards--use-shutdownPeripherals-on-TInpulse-and-TEchoBoard nrf52_variants: override shutdownPeripherals instead of powerOff for …	1 week ago
taco	0bd871cde6	add IRQ timeout logic for LR11X0	1 week ago
Florent	84d1e24338	nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate)	1 week ago
taco	79ef74ea8d	add IRQ timeout logic for SX1262	1 week ago
fdlamotte	3a67685597	Merge pull request #2883 from fdlamotte/repeater_btn repeater: poweroff on long press	1 week ago
taco	975a673efd	add calcMaxPacketMillis	1 week ago
fdlamotte	76c6e73fb6	Merge branch 'dev' into repeater_btn	1 week ago
fdlamotte	3eb5451d3e	Merge pull request #2906 from fdlamotte/shutdown_peripherals Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown	1 week ago
Quency-D	fd7b35f457	Move the rotation input to target.cpp	1 week ago
Quency-D	b26f53a263	Avoid waking display from rotary input	1 week ago
ripplebiz	41f4d6bd91	Merge pull request #2560 from Quency-D/heltec-v4-r8 Add heltec-v4-r8 board	1 week ago
Quency-D	61a8821d3c	Optimize battery voltage reading	1 week ago
Quency-D	a472cd7956	Delete duplicate pin definitions	1 week ago

1 2 3 4 5 ...

3199 Commits (d531a98da16bed55466b935479b8933eaffa80b3) All Branches Search

3199 Commits (d531a98da16bed55466b935479b8933eaffa80b3)

All Branches