MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	5f6821bb66	* new CLI config: flood.max.advert (default 16)	1 week ago
Scott Powell	3c96a7de43	* powersaving on/off lowercase fix	1 week ago
Scott Powell	f66c1d0258	* simplified the new flood.max.unscoped pref	2 weeks ago
Chris Barker	a33f3011a5	Feat: Adds flood.max.unscoped setting Before this commit, there was no way to set a different max hop count for unscoped messages. Now with this change, by defaul it tracks the flood.max setting, until a user provides a flood.max.unscoped value, which tax precidence for packets if ROUTE_TYPE_FLOOD is true.	2 weeks ago
Kevin Le	3621038b7b	Added detailed response for powersaving CLI	4 months ago
agessaman	1296aa7792	Refactor region def with helpers, refine docs Extract the inline cursor-walk in handleRegionCmd into file-local helpers (skipSpaces, rtrimSpaces, takeToken, splitNameJump, processRegionDefSegment), grouped immediately above the consumer. Behavior is identical; addresses PR #2540 review feedback on readability. Tighten the region def docs: collapse five Note callouts into three grouped paragraphs (Behavior / Existing regions / Limits), add a case-sensitivity caveat plus an error example, note the cursor reset between split commands, and use generic placeholder names.	3 weeks ago
agessaman	f3c6c34883	Update CLI command from `region bulk` to `region def`	4 weeks ago
agessaman	19f950018c	Add bulk region hierarchy command to CLI Add a new command `region bulk` for defining region hierarchies in a single line. This command allows users to create multiple regions in a single message. Updated the documentation to include usage examples and detailed parameter descriptions.	1 month ago
Paweł Małecki	56eb87d05a	add 'get rtcclock' CLI command to report RTC source and current time Returns the hardware RTC type (DS3231, RV3028, PCF8563, RX8130CE) or 'internal' when no external module was detected, alongside the current date and time in UTC. Useful for verifying that an external RTC is active and providing correct time to the node.	1 month ago
jirogit	f224a325e6	fix: enable radio.rxgain CLI command for LR1110 (T1000-E) USE_LR1110 was missing from the preprocessor guard in CommonCLI.cpp, causing both get and set to fail silently on T1000-E: - get radio.rxgain returned the full radio config string (fell through to the memcmp("radio", 5) branch) - set radio.rxgain returned "unknown config" (no branch matched) Fix: add -D USE_LR1110 to variants/t1000-e/platformio.ini and include USE_LR1110 in the #if guard on both get and set branches. CustomLR1110Wrapper already implements setRxBoostedGainMode() and getRxBoostedGainMode() via the RadioLibWrapper virtual interface, so no radio-layer changes are required. Tested on T1000-E: get/set/persist all confirmed working.	2 months ago
Kyle	db8a002c0e	fix: enforce upper bounds for rxdelay, txdelay, and direct.txdelay in CLI	2 months ago
Scott Powell	3d982711a6	* CommonCLI: more reply bounds checking	2 months ago
Scott Powell	db7baa7bd7	* CommonCLI: bounds check added to "unknown config:" replies	2 months ago
Scott Powell	91f3fa0bdf	* CLI: 'region put ...' now defaults to flood allowed	2 months ago
Scott Powell	7cdb056cb3	* CLI: 'region default ...' now auto-creates the region	2 months ago
Scott Powell	77d02e844f	* bug fix	2 months ago
Scott Powell	4131a455a2	* repeater: refactored 'region' CLI commands -> CommonCLI * room server: added RegionMap, and new CommonCLI wiring, default_scope handling * sensor: only minimal RegionMap wiring. Still needs work to handle default-scope	2 months ago
Wessel Nieboer	728b586c3a	Address comments	3 months ago
Wessel Nieboer	741392889d	Fix memcp compare length off by one Co-authored-by: ViezeVingertjes <[email protected]>	3 months ago
Wessel Nieboer	0aa0ec1f16	Add get/set dutycycle command We translate to af internally, it's easier to store and doesn't break stored prefs. Made get/set af command show deprecated, but it still works fine.	3 months ago
Rastislav Vysoky	285fc685c5	allow to set lower LoRa frequency	3 months ago
Wessel Nieboer	ff5aad71a6	Make radio.rxgain true by default after upgrades	3 months ago
Wessel Nieboer	1f48d2b869	Address comments	3 months ago
Wessel Nieboer	3c0d186569	Fix memcp compare length off by one Co-authored-by: ViezeVingertjes <[email protected]>	3 months ago
Wessel Nieboer	f6338430f8	Add get/set dutycycle command We translate to af internally, it's easier to store and doesn't break stored prefs. Made get/set af command show deprecated, but it still works fine.	3 months ago
João Brázio	f858f2e4bb	Rename sx126x_rx_boosted_gain to rx_boosted_gain	3 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	4 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	4 months ago
Specter242	e323755990	sensecap solar: add poweroff command and board power/LED parity	4 months ago
lincomatic	557d714c3c	don't limit bridge_baud to 115200	4 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	4 months ago
taco	1500a5a9cb	add get bootloader.ver command for nrf52	4 months ago
mesher-de	8e404e9aea	add advert.zerohop command to CLI	4 months ago
João Brázio	71136671bd	Implement remote lna toggle cli cmd	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
João Brázio	edeafde51c	Fix: Correct validation logic in isValidName function	5 months ago
Scott Powell	5627500988	* new "clkreboot" CLI command	5 months ago
liamcottle	7e24bd00b9	increase maximum flood advert interval to 168 hours (7 days)	5 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	5 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	5 months ago
entr0p1	1f59e52880	nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout Added NRF52840 power management core functionality: - Boot‑voltage lockout - Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2) - LPCOMP wake (for voltage-driven shutdowns) - VBUS wake (for voltage-driven shutdowns) - Per-board shutdown handler for board-specific tasks - Exposed CLI queries for power‑management status in CommonCLI.cpp - Added documentation in docs/nrf52_power_management.md. - Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards	5 months ago
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	5 months ago
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER * CommonCLI: new "get/set owner.info ..."	5 months ago
Kevin Le	33b1e7edb9	Added pad after powersaving_enabled	6 months ago
Kevin Le	89a289eb22	Added powersaving_enabled sanitization Moved powersaving_enabled to match serialization order	6 months ago
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 Added CLI to enable/disable powersaving	6 months ago
taco	fc93d84fb8	tweaks get/set adcMultiplier logic	7 months ago
taco	5a3ea64a97	Repeater: add adc.multiplier setting	7 months ago
zach	850d57a8f2	Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web REPO: 1. Flash a repeater 2. Connect over lora 3. Set bw to 42.7 KHZ It will revert back due to converting a double to a float. REPO2: 1.Flash Repeater 2. Apply float fix 3. Set to say 20.8 4. try to get value via app or web cli repeater config It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float	7 months ago

1 2 3

121 Commits (c6089a871e930c9dea01c51dfea1f1dfb050d5bf)