MeshCore

Commit Graph

Author	SHA1	Message	Date
UltimateCodeWarrior	b8b6598dd3	Fix blank OLED on T-Beam Supreme V3 (I2C bus + 0x3D address) The SH1106 OLED on the LilyGo T-Beam Supreme V3 never lights up because: 1. The primary I2C bus (Wire) that the OLED, BME280 and magnetometer share is never initialized. The PMU/RTC use Wire1 (via XPowersLib); nothing brings up Wire on PIN_BOARD_SDA/PIN_BOARD_SCL, so the display driver talks on the wrong default pins. 2. The OLED is at I2C address 0x3D on this board (0x3C is taken by the QMC6310 magnetometer), but SH1106Display::begin() only tried 0x3C. Initialize Wire for TBEAM_SUPREME_SX1262, and have SH1106Display::begin() prefer 0x3D (only ever used by the OLED) before falling back to 0x3C. Backwards-compatible for boards with the OLED at 0x3C. Closes #2609	1 month ago
ripplebiz	3192684582	Merge pull request #2752 from Quency-D/heltec-tower-v2 Add Heltec tower v2	1 month ago
ripplebiz	aa1cb1f663	Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command	1 month ago
ripplebiz	6a63dfce1c	Merge pull request #2771 from oltaco/nrf52-framework-buildfix Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork	1 month ago
Liam Cottle	c2cfba4af3	Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606 Fixed GPS time sync for Heltec T114	1 month ago
Kevin Le	62849ef114	Fixed GPS time sync for Heltec T114	1 month ago
ripplebiz	60ea4a91bf	Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection Use hardware channel activity detection for checking interference	1 month ago
taco	dd9b3b32c3	build fix for Heltec Mesh Solar and Mesh Pocket	1 month ago
Wessel Nieboer	7c8e092457	Have CAD be a separate toggle (set cad on/off)	2 months ago
Wessel Nieboer	099ef67348	Prevent packet errors from growing	5 months ago
Wessel Nieboer	04a6c7009a	Just check for not channel free	5 months ago
Wessel Nieboer	813d108c7a	Also return busy if preamble detected	5 months ago
Wessel Nieboer	4f9a091671	Use hardware channel activity detection for checking interference	5 months ago
Marco	e7db7c5a94	Add ESP32 Reset Reason	1 month ago
Huw Duddy	29f0a7fc4f	Merge pull request #2763 from meshcore-dev/anon-contacts-fix * fix for anon contacts when full	1 month ago
Scott Powell	2e73fe948e	* fix for anon lastmod	1 month ago
Scott Powell	538ac38e18	* fix for counter in RESP_CODE_CONTACTS_START	1 month ago
Scott Powell	c2d223ff55	* now handle the case where onAdvertRecv() should _replace_ the anon contact slot	1 month ago
Scott Powell	07648e3344	* fix for anon contacts when full	1 month ago
ripplebiz	a5cb0c25ca	Merge pull request #2140 from Quency-D/cli-lna-command Add CLI control to LoRa's fem LNA.	1 month ago
Quency-D	5300fa18c7	Restore companion NodePrefs file ending	1 month ago
Quency-D	3ee58fd2e3	Remove companion FEM RX gain command IDs	1 month ago
Scott Powell	d5f74e93c5	* PAYLOAD_TYPE_PATH bad path_len now rejected	1 month ago
Quency-D	1c4c995a41	Fix low power consumption issues	1 month ago
Quency-D	d2d3d44c9b	Add maximum power limit	1 month ago
Quency-D	fe56d01da2	add tower v2 PA control	1 month ago
Quency-D	190dbb5293	Merge pull request #13 from meshcore-dev/dev merge Dev	1 month ago
Quency-D	9100a58671	Merge branch 'dev' into cli-lna-command	2 months ago
ripplebiz	5f3b7f25d0	Merge pull request #2722 from liamcottle/fix/free-packet-on-parse-failure Fix: CMD_SEND_RAW_PACKET not freeing packet on parse failure	2 months ago
liamcottle	ae0bb7ee95	use releasePacket instead of _mgr->free	2 months ago
liamcottle	07bfe90695	free packet on parse failure	2 months ago
Scott Powell	07a3ca9e05	Merge branch 'dev' # Conflicts: # docs/faq.md	2 months ago
Scott Powell	8c0d5c5b24	* version 1.16.0	2 months ago
ripplebiz	74adda6316	Merge pull request #2702 from meshcore-dev/flood.max.advert new CLI config: flood.max.advert	2 months ago
Scott Powell	8fc2da5c98	* default now 8, per the will of the peoples.	2 months ago
Liam Cottle	b6454d6251	Merge pull request #2703 from IoTThinks/Fixed-powersaving--in-cli_commands.md-2026-06 Change default power saving setting to 'off'	2 months ago
IoTThinks	6a9a84e8a5	Change default power saving setting to 'off'	2 months ago
Scott Powell	5f6821bb66	* new CLI config: flood.max.advert (default 16)	2 months ago
Scott Powell	397ac6144f	* number allocations: Ripple range reserved	2 months ago
ripplebiz	53d50aa1ef	Merge pull request #2684 from oltaco/rp2040-build-fixes Build fixes for some RP2040 targets	2 months ago
Liam Cottle	1485d3301b	Merge pull request #2463 from NoodlesNZ/fix-stddef Add stddef.h to fix compilation issue on MacOS	2 months ago
Liam Cottle	5222ee4d13	Merge pull request #2685 from oltaco/more-build-fixes Build fixes for nibble_screen_connect and ThinkNode M2	2 months ago
taco	b4b0a0ee0f	build fixes for nibble_screen_connect and thinknode_m2	2 months ago
taco	7ce8b66718	build fix for rp2040 companion usb	2 months ago
taco	33ce1c991c	add missing radio_init() for rak11310	2 months ago
taco	2a8bd3edad	pin platform-raspberrypi to 4e22a0d pins framework-arduinopico @ 1.50600.0+sha.6a1d13e9	2 months ago
Liam Cottle	b4038529b5	Merge pull request #2683 from oltaco/techo-card-buildfixes build fixes for LilyGo T-Echo Card	2 months ago
taco	2f221acd37	build fixes for LilyGo T-Echo Card	2 months ago
Liam Cottle	da21d42a2e	Merge pull request #2672 from meshcore-dev/non-contact-requests Non contact requests	2 months ago
Liam Cottle	b83355e702	Merge pull request #2671 from sefinek/fix/typos-grammar-formatting Fix typos and formatting in documentation and comments	2 months ago

1 2 3 4 5 ...

3015 Commits (b8b6598dd3ab47489767167aa85ce727c5823054) All Branches Search

3015 Commits (b8b6598dd3ab47489767167aa85ce727c5823054)

All Branches