MeshCore

Commit Graph

Author	SHA1	Message	Date
🚀 Andrew R. DeFilippis	97b41ace98	Harden buildBLEName against buffer overflow and malformed UTF-8 The original implementation accepted dest_size but only used it in the snprintf fast path — manual memcpy assembly could overwrite the buffer if a future caller passed a smaller destination. Additionally, an unsigned underflow on name_budget when prefix_len >= BLE_NAME_MAX_LEN could cascade into massive write lengths. - Clamp all output to min(dest_size-1, BLE_NAME_MAX_LEN) via max_out - Guard against prefix_len >= max_out to prevent unsigned underflow - Validate UTF-8 continuation bytes in utf8CharLen to handle malformed node names (truncated sequences, missing continuations) - Fix backward tail walk to detect malformed sequence at name[0] Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
🚀 Andrew R. DeFilippis	90cdbec140	Fix BLE name showing as T1000-E-BOOT for long node names The Nordic SoftDevice S140 defaults to a 31-byte maximum GAP device name. When "MeshCore-" (9 bytes) + node_name exceeds 31 bytes (i.e. node names >= 23 chars), sd_ble_gap_device_name_set() silently fails and the name falls back to USB_PRODUCT ("T1000-E-BOOT"). Add UTF-8 safe middle-truncation that preserves the beginning and end of the node name (where users place emoji and device-type identifiers), fitting the result within the 29-byte scan response limit so it advertises as COMPLETE_LOCAL_NAME. Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
ripplebiz	d05d6abab8	Merge pull request #1726 from weebl2000/fix-packet-pool-leak-queue-full Fix packet pool leak when rx queue is full	4 months ago
ripplebiz	c2abe894c9	Merge pull request #1728 from oltaco/nrf52-bootloader-version NRF52: Add get bootloader.ver command for NRF52	4 months ago
taco	1500a5a9cb	add get bootloader.ver command for nrf52	4 months ago
Wessel Nieboer	ffc9815e9a	Fix packet pool leak when rx queue is full PacketQueue::add() silently dropped packets when the queue was at capacity. The packet pointer was lost — never enqueued, never returned to the unused pool. Each occurrence permanently shrank the 32-packet pool until allocNew() returned NULL and the node went deaf. Return bool from add() and free the packet back to the pool on failure.	4 months ago
Liam Cottle	bbc5f0c11a	Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover discover sends a single repeater discovery request and populates the neighbor list; self is excluded	4 months ago
Scott Powell	2e00298128	* companion: retransmit delays now hard-coded (only for client repeat mode)	4 months ago
Scott Powell	5de3e1bf32	* repeater: slight increase to default direct.txdelay	4 months ago
ripplebiz	a073ba4707	Merge pull request #1719 from 3dpgg/pr_lilygo_tlora_terminal_chat Fix LilyGo_TLora_V2_1_1_6_terminal_chat build	4 months ago
3DPGG	3e53df5082	Fix LilyGo_TLora_V2_1_1_6_terminal_chat build This change addresses two issues. The first is that the LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile simple_repeater/MyMesh.cpp. All other examples of terminal chat targets are instead building simple_secure_chat/main.cpp . This change would align this build to the rest of the builds. The second issue, found during the course of investigating the first, stems from simple_repeater/MyMesh.cpp using the MAX_NEIGHBOURS #define to control whether the neighbor list is kept. Repeaters that keep this list must define this value, and if the value is not defined, then all neighbor-related functionality is compiled out. However, the code that replies to REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define, and thus any target that compiles simple_repeater/MyMesh.cpp without defining MAX_NEIGHBOURS would get an undefined variable compilation error. As a practical matter though, there are no targets that compile simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS, except this build due to the first issue. As a result, the second issue is addressed only as a matter of completeness. The expected behavior with this change is that such a repeater would send a valid reply indicating zero known neighbors.	4 months ago
realtag	0770618ee2	Allow repeater discovery even if repeater mode is disabled on the requesting repeater.	4 months ago
realtag	bf9c6cb50f	Increased the timeout timer to 60 seconds, up from 30 seconds.	4 months ago
realtag	87c78a98bd	discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses	4 months ago
realtag	e8785dd9b0	discover sends a single repeater discovery request and populates the neighbor list; self is excluded	4 months ago
ripplebiz	2005977403	Merge pull request #1699 from recrof/m5stack-m6l-build-fix fix M5Stack Unit M6L build errors	4 months ago
recrof	cafc212bb2	fix M5Stack Unit M6L build errors	4 months ago
Scott Powell	e2571accbe	* ver 1.13.0	4 months ago
ripplebiz	88452c412e	Merge pull request #1603 from oltaco/fix-build.sh-for-RP2040-and-STM32 Add RP2040 and STM32 support to build.sh	4 months ago
ripplebiz	2220eca4f3	Merge pull request #1669 from Azuresword/fix/wio-tracker-l1-grove-sensor-v2 Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)	4 months ago
ripplebiz	a6e741e30e	Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon Add muted icon to show when buzzer is muted	4 months ago
Scott Powell	0abac35744	* client_repeat state now in _DEVICE_INFO response	4 months ago
Scott Powell	564a19d125	* companion client repeat mode support	4 months ago
taco	5df139f3d6	update build.sh to support RP2040 and STM32	4 months ago
taco	77675ab496	add -D ESP32_PLATFORM to esp32_base	4 months ago
Liam Cottle	5ccae4bddc	Merge pull request #1671 from recrof/rak3112-fix fix: usb and ui for rak 3112	4 months ago
Leah	fb025fb67e	Add muted icon to show when buzzer is muted	4 months ago
Rastislav Vysoky	beff18c53b	fix usb and build for rak 3112	4 months ago
dylan	f720338c03	Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1) Sensors connected via the Grove I2C connector (D18/D17) were not detected because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default. Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1, matching the physical Grove connector pinout. Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
ripplebiz	e33d93dc7f	Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2 Enable register patch heltec tracker v2	4 months ago
ripplebiz	8db42146d1	Merge pull request #1645 from Snayler/Snayler-patch-1 Enable TX LED for LilyGo LoRa32 V2.1_1.6	4 months ago
Liam Cottle	e418b0c0ab	Merge pull request #1557 from mattzzw/dev cli_commands.md: `region` available via remote cli in 1.12.0	4 months ago
mattzzw	d11d8ea626	Merge branch 'meshcore-dev:dev' into dev	4 months ago
Liam Cottle	4944a46af1	Merge pull request #1638 from thanegill/build_sh-list build.sh: add list and -l to list firmwares available to build	4 months ago
Liam Cottle	7d7e88e950	Merge pull request #1651 from liamcottle/fix/path-trace-timeout Fix: Path Trace Timeout	4 months ago
liamcottle	bafa2ccd22	fix estimated timeout for multi byte path traces	4 months ago
Snayler	810fd561d2	Enable TX LED for LilyGo LoRa32 V2.1_1.6 Working on my device, green TX LED starts blinking every time I transmit	4 months ago
ripplebiz	3f33455b4d	Merge pull request #1570 from Quency-D/fix-heltec-power-consumption Fix heltec-v4 power consumption	4 months ago
ripplebiz	248c3107b4	Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance Kiss modem spec compliance	4 months ago
Quency-D	9efb7cb0b6	Merge pull request #2 from weebl2000/pr-1570-fix-heltec-v4-power Fix double claim, eliminate dead code at compile time	4 months ago
Thane Gill	3ff1394dd2	build.sh: add list and -l to list firmwares available to build.	4 months ago
Michael	e4ef6dba3d	Merge pull request #2 from agessaman/fix-simplify-kiss-noise-floor Simplify kiss noise floor	4 months ago
Liam Cottle	b1094c2842	Merge pull request #1616 from jbrazio/2026/raknorm Refactor environment names and build flags for RAK variants	4 months ago
ripplebiz	f6fc05601c	Merge pull request #1609 from weebl2000/bridge-always-has-work Bridge always has work (prevents sleep)	4 months ago
Liam Cottle	736ddbfd99	Merge pull request #1620 from thanegill/patch-2 Correct manufacturer name 'Elecrow ThinkNode M5'	4 months ago
Thane Gill	31a2e74ada	Correct manufacturer name 'Elecrow ThinkNode M5'	4 months ago
Liam Cottle	10eacc4e95	Merge pull request #1316 from weebl2000/allow-negative-tx Allow negative tx	4 months ago
João Brázio	fcfbb458f8	Refactor environment names and build flags for RAK variants	4 months ago
Wessel Nieboer	e8646f5ede	Parse as signed int	4 months ago
agessaman	776131e263	simplify kiss noise floor sampling	4 months ago

1 2 3 4 5 ...

2316 Commits (97b41ace98d5233c8b4c936ef4c6179a07ea67df) All Branches Search

2316 Commits (97b41ace98d5233c8b4c936ef4c6179a07ea67df)

All Branches