MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	5f6821bb66	* new CLI config: flood.max.advert (default 16)	1 week ago
Scott Powell	3c96a7de43	* powersaving on/off lowercase fix	1 week ago
Scott Powell	f66c1d0258	* simplified the new flood.max.unscoped pref	2 weeks ago
Chris Barker	a33f3011a5	Feat: Adds flood.max.unscoped setting Before this commit, there was no way to set a different max hop count for unscoped messages. Now with this change, by defaul it tracks the flood.max setting, until a user provides a flood.max.unscoped value, which tax precidence for packets if ROUTE_TYPE_FLOOD is true.	2 weeks ago
Kevin Le	3621038b7b	Added detailed response for powersaving CLI	4 months ago
agessaman	1296aa7792	Refactor region def with helpers, refine docs Extract the inline cursor-walk in handleRegionCmd into file-local helpers (skipSpaces, rtrimSpaces, takeToken, splitNameJump, processRegionDefSegment), grouped immediately above the consumer. Behavior is identical; addresses PR #2540 review feedback on readability. Tighten the region def docs: collapse five Note callouts into three grouped paragraphs (Behavior / Existing regions / Limits), add a case-sensitivity caveat plus an error example, note the cursor reset between split commands, and use generic placeholder names.	3 weeks ago
agessaman	f3c6c34883	Update CLI command from `region bulk` to `region def`	4 weeks ago
agessaman	19f950018c	Add bulk region hierarchy command to CLI Add a new command `region bulk` for defining region hierarchies in a single line. This command allows users to create multiple regions in a single message. Updated the documentation to include usage examples and detailed parameter descriptions.	1 month ago
jirogit	f224a325e6	fix: enable radio.rxgain CLI command for LR1110 (T1000-E) USE_LR1110 was missing from the preprocessor guard in CommonCLI.cpp, causing both get and set to fail silently on T1000-E: - get radio.rxgain returned the full radio config string (fell through to the memcmp("radio", 5) branch) - set radio.rxgain returned "unknown config" (no branch matched) Fix: add -D USE_LR1110 to variants/t1000-e/platformio.ini and include USE_LR1110 in the #if guard on both get and set branches. CustomLR1110Wrapper already implements setRxBoostedGainMode() and getRxBoostedGainMode() via the RadioLibWrapper virtual interface, so no radio-layer changes are required. Tested on T1000-E: get/set/persist all confirmed working.	2 months ago
Kyle	db8a002c0e	fix: enforce upper bounds for rxdelay, txdelay, and direct.txdelay in CLI	2 months ago
Quency-D	c42f6db0eb	Revise according to the review comments. Co-authored-by: Copilot <[email protected]>	2 months ago
Scott Powell	3d982711a6	* CommonCLI: more reply bounds checking	2 months ago
Scott Powell	db7baa7bd7	* CommonCLI: bounds check added to "unknown config:" replies	2 months ago
Scott Powell	91f3fa0bdf	* CLI: 'region put ...' now defaults to flood allowed	2 months ago
Scott Powell	7cdb056cb3	* CLI: 'region default ...' now auto-creates the region	2 months ago
Scott Powell	77d02e844f	* bug fix	2 months ago
Scott Powell	4131a455a2	* repeater: refactored 'region' CLI commands -> CommonCLI * room server: added RegionMap, and new CommonCLI wiring, default_scope handling * sensor: only minimal RegionMap wiring. Still needs work to handle default-scope	2 months ago
Quency-D	8435464c84	Add v4 FEM LNA CLI control commands.	3 months ago
Wessel Nieboer	728b586c3a	Address comments	3 months ago
Wessel Nieboer	741392889d	Fix memcp compare length off by one Co-authored-by: ViezeVingertjes <[email protected]>	3 months ago
Wessel Nieboer	0aa0ec1f16	Add get/set dutycycle command We translate to af internally, it's easier to store and doesn't break stored prefs. Made get/set af command show deprecated, but it still works fine.	3 months ago
Rastislav Vysoky	285fc685c5	allow to set lower LoRa frequency	3 months ago
Wessel Nieboer	ff5aad71a6	Make radio.rxgain true by default after upgrades	3 months ago
Wessel Nieboer	1f48d2b869	Address comments	3 months ago
Wessel Nieboer	3c0d186569	Fix memcp compare length off by one Co-authored-by: ViezeVingertjes <[email protected]>	3 months ago
Wessel Nieboer	f6338430f8	Add get/set dutycycle command We translate to af internally, it's easier to store and doesn't break stored prefs. Made get/set af command show deprecated, but it still works fine.	3 months ago
João Brázio	f858f2e4bb	Rename sx126x_rx_boosted_gain to rx_boosted_gain	3 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	4 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	4 months ago
Specter242	e323755990	sensecap solar: add poweroff command and board power/LED parity	4 months ago
lincomatic	557d714c3c	don't limit bridge_baud to 115200	4 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	4 months ago
taco	1500a5a9cb	add get bootloader.ver command for nrf52	4 months ago
mesher-de	8e404e9aea	add advert.zerohop command to CLI	4 months ago
João Brázio	71136671bd	Implement remote lna toggle cli cmd	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
João Brázio	edeafde51c	Fix: Correct validation logic in isValidName function	5 months ago
Scott Powell	5627500988	* new "clkreboot" CLI command	5 months ago
liamcottle	7e24bd00b9	increase maximum flood advert interval to 168 hours (7 days)	5 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	5 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	5 months ago
entr0p1	1f59e52880	nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout Added NRF52840 power management core functionality: - Boot‑voltage lockout - Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2) - LPCOMP wake (for voltage-driven shutdowns) - VBUS wake (for voltage-driven shutdowns) - Per-board shutdown handler for board-specific tasks - Exposed CLI queries for power‑management status in CommonCLI.cpp - Added documentation in docs/nrf52_power_management.md. - Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards	5 months ago
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	5 months ago
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER * CommonCLI: new "get/set owner.info ..."	5 months ago
Kevin Le	33b1e7edb9	Added pad after powersaving_enabled	6 months ago
Kevin Le	89a289eb22	Added powersaving_enabled sanitization Moved powersaving_enabled to match serialization order	6 months ago
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 Added CLI to enable/disable powersaving	6 months ago
taco	fc93d84fb8	tweaks get/set adcMultiplier logic	7 months ago
taco	5a3ea64a97	Repeater: add adc.multiplier setting	7 months ago

1 2 3

123 Commits (9100a5867152181f957f8856b854cbc56ce925c9)