MeshCore

Commit Graph

Author	SHA1	Message	Date
ViezeVingertjes	79caba5bab	Document HW_ERR_TX_BUSY in KISS modem protocol	3 weeks ago
Liam Cottle	cf9bf1d7fe	Merge pull request #2565 from willumpie82/ble-pin-code Disable BLE_PIN_CODE for E290 companion USB environment	3 weeks ago
Willem Oldemans	e1616ff29d	Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration	3 weeks ago
Willem Oldemans	973321d9b1	Disable BLE_PIN_CODE for E290 companion USB environment Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble environment. The presence of BLE_PIN_CODE prevents the unit from operating as a USB companion. Commenting it out allows dynamic PIN generation and enables USB companion functionality.	3 weeks ago
Liam Cottle	6325a85336	Merge pull request #2493 from Rococo88/complex-wifi-reconnect Refactor WiFi auto-reconnect to use non-blocking polling	3 weeks ago
ripplebiz	0db7715430	Merge pull request #2497 from oltaco/reduce-esp32-dram Reduce dram0_0 usage on older ESP32 boards	3 weeks ago
ripplebiz	f4be34a997	Merge pull request #2515 from Cisien/station-g3-esp32 Add support for Station G3 and its software configurable LNA/PA1	3 weeks ago
Liam Cottle	555745700e	Merge pull request #2543 from meshcore-dev/cmd-send-raw new CMD_SEND_RAW_PACKET	3 weeks ago
Scott Powell	c588540b1b	* new CMD_SEND_RAW_PACKET	3 weeks ago
Huw Duddy	12a37a224a	Merge pull request #2536 from recrof/patch-3 revert: "feat: Enable GPS on RAK 1W kit" (#2401)	3 weeks ago
Rastislav Vysoky	68363d9e4d	revert: "feat: Enable GPS on RAK 1W kit" (#2401 ) reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707	3 weeks ago
liamcottle	b0b87fd709	fix gps pins for lilygo t impulse plus	3 weeks ago
Liam Cottle	c4523f71a9	Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus Add support for LilyGo T-Impulse-Plus	4 weeks ago
liamcottle	2fdbfbdbf6	turn off 3.3v rail when powering off	4 weeks ago
Liam Cottle	96bbed225a	Merge pull request #2520 from Quency-D/heltec-mesh-node-t1 add heltec-mesh-node-t1	4 weeks ago
liamcottle	a49ee6ebe9	fix battery voltage reading	4 weeks ago
liamcottle	242c45f4a3	initial support for lilygo t impulse plus	4 weeks ago
Liam Cottle	3cdcb3ef84	Merge pull request #2519 from oltaco/customlfs-0.2.2 pin CustomLFS to version 0.2.2	4 weeks ago
Quency-D	6d3b71eed9	add heltec-mesh-node-t1	4 weeks ago
taco	716ba8ee5e	pin CustomLFS to version 0.2.2 CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite	4 weeks ago
Huw Duddy	3eacc49489	Merge pull request #2503 from jirogit/fix/techo-lite-non-shell-usb feat(techo-lite): add USB companion radio target for non-shell variant	4 weeks ago
Liam Cottle	e7ea2fc563	Merge pull request #2516 from oltaco/disable-ds3231-probe Add option to disable DS3231 RTC probe	4 weeks ago
taco	e7e97ec438	add option to disable DS3231 probe	4 weeks ago
Huw Duddy	a3e1930176	Merge pull request #2511 from entr0p1/techo-lite-rf-fix Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.	4 weeks ago
Chris	75fb07fc2c	Add support for Station G3 and its software configurable LNA and PA1	4 weeks ago
entr0p1	77bd994a61	T-Echo Lite LoRa radio fixes - Set TCXO voltage to 1.8 (not defined previously, falls back to default) - Set correct variable name for SX1262 RX/TX pins - Fix SX1262 RX pin number	4 weeks ago
Liam Cottle	56d4671c2c	Merge pull request #2490 from tuzzmaniandevil/dev Enhance KissModem frame processing and timeout handling	4 weeks ago
Huw Duddy	6e2e9cc33c	Merge pull request #2505 from liamcottle/feature/companion-repeat-build-flag Add build flag to configure allowed repeat frequency range	4 weeks ago
liamcottle	841db56595	add build flag to configure allowed repeat freq range	4 weeks ago
jirogit	5a6fd4c16a	feat(techo-lite): add USB companion radio target for non-shell variant	4 weeks ago
tuzzmaniandevil	ffa76016ff	Address two comments from PR	4 weeks ago
taco	b612ba49f2	reduce dram0_0 usage by lowering OFFLINE_QUEUE_SIZE some older ESP32 boards were pushing the limits of the dram segment causing the linker to fail, especially for ble and wifi firmwares. lowering OFFLINE_QUEUE_SIZE reduces dram usage	4 weeks ago
Liam Cottle	0800f8d677	Merge pull request #2494 from uwl-cpe-2025/fix/missing-include Add missing Wire.h include to sensors	4 weeks ago
Josiah VanderZee	4b6b8abe7a	Add missing Wire.h include for sensors This slipped through in PR #2327 and I noticed because the TechoBoard.h for my variant doesn't include the Wire header, so the source file in question does not coincidentally obtain a copy.	4 weeks ago
Rococo88	a0cc3bab4b	Refactor WiFi auto-reconnect to use non-blocking polling	4 weeks ago
Liam Cottle	51665881a2	Merge pull request #2492 from meshcore-dev/set-flood-scope-none Companion: Set flood scope to None	4 weeks ago
Scott Powell	6979326340	* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped * FIRMWARE_VER_CODE bumped to 12	4 weeks ago
Liam Cottle	bf733f00a6	Merge pull request #2488 from weebl2000/fix-rak-pin-gps-en-undefined Gate PIN_GPS_EN	4 weeks ago
ripplebiz	b75cefbfb4	Merge pull request #2327 from NickDunklee/fix-environment-sensor-refactor fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth	4 weeks ago
tuzzmaniandevil	314d777b42	Enhance KissModem frame processing and timeout handling	4 weeks ago
Wessel Nieboer	3bde089bdb	Gate PIN_GPS_EN Do not reference it unconditionally	4 weeks ago
Huw Duddy	6b3df327e9	Merge pull request #2483 from oltaco/dev fix CustomLFS version pinning	4 weeks ago
taco	68ab882cd5	fix CustomLFS version pinning	4 weeks ago
Liam Cottle	19ebd8c795	Merge pull request #2480 from KPrivitt/dev Incorrect time_t TypeDef used in RAK12035_SoilMoisture	4 weeks ago
ripplebiz	f9ddd9da72	Merge pull request #2445 from kizniche/update-docs-txdelay-rxdelay Docs: Add explanatory notes for txdelay, direct.txdelay, and rxdelay	4 weeks ago
ripplebiz	00afb06768	Merge pull request #2475 from uwl-cpe-2025/fix/ST7789-reset-timing Do not perform redundant reset on ST7789 displays	4 weeks ago
Kenneth Privitt	235706a22a	Incorrect time_t TypeDef in RAK12035_SoilMoisture	1 month ago
Josiah VanderZee	e56c1b3d58	Do not perform redundant reset on ST7789 displays The `::init` method in the Adafruit ST7789 library is responsible to initialize the device. This includes performing a reset, which can be found in the Adafruit source for `Adafruit_SPITFT`. Before this change, MeshCore performed its own ST7789 display reset sequence, which consisted of three steps. * Pull reset low * Wait 10ms * Pull reset high Importantly, there was no fixed delay after pulling reset high. The ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode and 120ms in Sleep Out Mode before it will properly receive commands. When `Adafruit_SPITFT` resets the device after MeshCore has already reset it, the mandatory time may not have elapsed, leading to strange behavior. In the author's case, this issue caused the initial `fillScreen` to fail, such that the display showed an uninitialized framebuffer. This removes the MeshCore delay, leaving the responsibility of reset to `Adafruit_SPITFT`, where they have the correct delays in place with extra safety margin. The change was briefly tested by Josiah VanderZee and Ben Zignego on a custom hardware build using an nRF52840 Dongle and an Adafruit 4311 TFT display. The user button seemed to behave strangely, but the display looked correct.	1 month ago
Liam Cottle	e727fd543b	Merge pull request #2462 from meshcore-dev/target-dup-cleanup Refactor: removed duplicated target code	1 month ago
Liam Cottle	679fb9c0ab	Merge pull request #2460 from liamcottle/ui/startup-mute Don't play startup tune if buzzer pref disabled	1 month ago

1 2 3 4 5 ...

2823 Commits (79caba5bab92250e5664883c23ba2b2562f2ae7b) All Branches Search

2823 Commits (79caba5bab92250e5664883c23ba2b2562f2ae7b)

All Branches