MeshCore

Commit Graph

Author	SHA1	Message	Date
entr0p1	77bd994a61	T-Echo Lite LoRa radio fixes - Set TCXO voltage to 1.8 (not defined previously, falls back to default) - Set correct variable name for SX1262 RX/TX pins - Fix SX1262 RX pin number	4 weeks ago
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	1 month ago
Quency-D	696aae6ed1	Heltec boards have LNA disabled by default.	1 month ago
chrisdavis2110	5fbd473298	added PIN_GPS_EN=-1 to rak3401 companion usb	1 month ago
chrisdavis2110	0265851621	added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble	1 month ago
Rastislav Vysoky	5beef490a0	add kiss radio env to most of the variants	1 month ago
Rastislav Vysoky	66009069cd	standardize the minewsemi variant	1 month ago
Rastislav Vysoky	b963681830	replace all intendation tabs to spaces in pio ini files	1 month ago
Rastislav Vysoky	12d9cc3752	make g2 more in line with other variants	1 month ago
me	b91f127e4e	fix: correct device model name for Heltec Wireless Paper	1 month ago
Confi	835b0e9114	fix(sensecap_solar): init LED_WHITE LOW to prevent always-on at boot	1 month ago
zevaryx	7f38e3f145	feat: Enable GPS on RAK 1W kit	1 month ago
Kevin Le	277331381e	Added Xiao S3 variant. This is for Xiao S3 and a normal Wio SX1262 for Xiao shield.	1 month ago
Wessel Nieboer	66fe9ac2db	Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2 Should only really be disabled when it causes issues.	2 months ago
pelgraine	d516cd8a9e	Fixes #1183 — T-Echo Lite incorrect battery voltage Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo Lite has a gated voltage divider that must be enabled before reading. Also added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02 from other peripherals. Pin definitions hardcoded from LilyGo's t_echo_lite_config.h. I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the battery ADC pin. GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's config — UART TX/RX, wake, PPS, and power enable were all scrambled. SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2). Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match Heltec V4 reference within 10mV.	2 months ago
Wessel Nieboer	07671cf1fe	Implement proper shutdown procedure for R1 neo fixes #2361	1 month ago
me	28b1586fd7	feat(techo-lite): add Non-Shell (screenless) companion BLE variant T-Echo Lite Non-Shell has no ePaper display, but the existing companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base env. This causes display.begin() to run on non-existent hardware, corrupting BLE initialization and generating a random PIN that cannot be displayed, making BLE connection impossible. Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that: - excludes DISPLAY_CLASS and ePaper-related build flags - removes GxEPDDisplay.cpp and ui-new from build sources - uses static BLE_PIN_CODE=123456 (avoids random PIN generation) Also fix boards/t-echo.json: - add nrfutil to upload protocols list - add use_1200bps_touch=true and wait_for_upload_port=true to enable reliable flashing via PlatformIO upload button	1 month ago
Marco	e8907a3108	Add Heltec V4 set adc.multiplier	2 months ago
Confi	3fcf5b548b	fix(sensecap_solar): set P_LORA_TX_LED to 12 after LED remap Align TX activity LED with LED_BLUE / variant.h after LED definition and power-button pin mapping changes.	2 months ago
Rastislav Vysoky	0899f66034	fix: remove sensors from xiao c3 companion because of bootloops	2 months ago
Kevin Le	992dddeee5	Added support for Expansion Kit to Heltec V4 OLED repeaters	2 months ago
jirogit	230c9af87b	feat: add USB Companion Radio env for Heltec Wireless Paper	2 months ago
Petr Kracik	e6c6282d40	Variants: Enable ElegantOTA on ESP32-C6 devices	2 months ago
Rastislav Vysoky	bd05eca9f5	Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb	2 months ago
liamcottle	7d8d66c3e6	fix compilation error in wifi variants due to not enough ram	2 months ago
Malkavien	8056344b86	fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity The Waveshare RP2040-LoRa board has an RF switch with two complementary control lines: - DIO2 (CTRL) -- driven automatically by the SX1262 chip: HIGH on TX, LOW on RX - GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and the switch never properly selected the LNA/RX path Without this pin driven, the RF switch never switches to RX mode, resulting in completely degraded reception. TX was unaffected because DIO2 alone is sufficient to activate the TX path. Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of DIO2, so the switch correctly routes the signal to the LNA on receive. Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf	2 months ago
me	d9cfd075a5	fix: remove real WiFi credentials from ThinkNode M5 variant variants/thinknode_m5/platformio.ini contained actual WiFi SSID and password credentials (Livebox-633C) committed by mistake. Replaced with placeholder values consistent with other variants (myssid/mypwd).	2 months ago
Wessel Nieboer	057542625b	Fix T1000E press=high	4 months ago
Wessel Nieboer	0a13ac7fc7	Default button polarity to active-LOW across all firmware types Nearly all LoRa boards use a boot button that pulls to ground when pressed.	4 months ago
Wessel Nieboer	a5ae89aac0	Fix RAK4631 SX1262 hardware pin config	3 months ago
jirogit	6769b74df6	fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room') env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME, causing Generic ESPNow room server nodes to advertise with the wrong device name on the mesh.	2 months ago
jirogit	ce32d91ecb	fix: correct ADVERT_NAME for ThinkNode M5 (was M2) Repeater and Room Server environments in variants/thinknode_m5/platformio.ini were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise with the wrong device name on the mesh. - env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater' - env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'	2 months ago
KPrivitt	27f732653b	Added RAK12035 Soil Moisture and Temperature Sensor (#2223 )	2 months ago
Liam Cottle	fcad0dc7ed	Apply suggestion from @weebl2000 Co-authored-by: Wessel <[email protected]>	2 months ago
Liam Cottle	8fc9e1736c	Apply suggestion from @weebl2000 Co-authored-by: Wessel <[email protected]>	2 months ago
liamcottle	b37201db89	double press top button to go back on gat562 mesh watch	2 months ago
liamcottle	1a897a3b5f	use top button to wake hibernated gat562 mesh watch	2 months ago
overkillfpv	f0ec5d2ae7	changed to set the preamble on radio settings change	2 months ago
Snayler	bfdd5fb571	Fix formatting of ADC_MULTIPLIER definition	2 months ago
Snayler	4b25f0a3df	Add correct ADC_MULTIPLIER definition to Heltec Wireless Paper	2 months ago
Snayler	50e9456f28	Define ADC_MULTIPLIER for adjustable ADC calculation	2 months ago
MGJ	76be69dcde	Reduce unnecessary compilation time	2 months ago
MGJ	cd6c09a0d9	Support for GAT562 Mesh Watch13 device	2 months ago
Jeroen Vermeulen	da689c8e91	Fix default radio.rxgain for Station G2 As @LitBomb pointed out in his [comment](https://github.com/meshcore-dev/MeshCore/issues/2118#issuecomment-4108168109) on #2118 RX Boosted Gain should not be enabled for the Station G2. This change is a fix for #2124 to make the default of `radio.rxgain` to be OFF on the Station G2. This restores the pre-1.14.1 behaviour with the only change being the user is now able to change the setting in the CLI.	2 months ago
Konstantin	c7b8db55e6	Fix typo for ThinkNode M5 room server environment	3 months ago
whywilson	b07ab2bc55	Remove useless define in GAT562_Mesh_EVB_Pro.	3 months ago
Quency-D	f6cfed66b3	add heltec_mesh_node_t096 board.	3 months ago
Robert Ekl	6978fc4bc9	Fix T1000-E pin comments	3 months ago
whywilson	69123ca056	Update GAT562_Mesh_EVB_Pro Config and remove LoRa Specification and change Repeater name.	3 months ago
João Brázio	75895895f0	Add USE_SX1262 flag to multiple platformio.ini configurations	3 months ago

1 2 3 4 5 ...

1023 Commits (716ba8ee5e14b37ed53cd7eb4e6721c483e80fdc)