MeshCore

Commit Graph

Author	SHA1	Message	Date
taco	716ba8ee5e	pin CustomLFS to version 0.2.2 CustomLFS 0.2.2 adds support for the flash chip in LilyGo T-Echo Card and T-Echo Lite	4 weeks ago
Huw Duddy	a3e1930176	Merge pull request #2511 from entr0p1/techo-lite-rf-fix Corrected T-Echo Lite SX1262 RXEN and TXEN pins, TCXO voltage.	4 weeks ago
entr0p1	77bd994a61	T-Echo Lite LoRa radio fixes - Set TCXO voltage to 1.8 (not defined previously, falls back to default) - Set correct variable name for SX1262 RX/TX pins - Fix SX1262 RX pin number	4 weeks ago
Liam Cottle	56d4671c2c	Merge pull request #2490 from tuzzmaniandevil/dev Enhance KissModem frame processing and timeout handling	4 weeks ago
Huw Duddy	6e2e9cc33c	Merge pull request #2505 from liamcottle/feature/companion-repeat-build-flag Add build flag to configure allowed repeat frequency range	4 weeks ago
liamcottle	841db56595	add build flag to configure allowed repeat freq range	4 weeks ago
tuzzmaniandevil	ffa76016ff	Address two comments from PR	4 weeks ago
Liam Cottle	0800f8d677	Merge pull request #2494 from uwl-cpe-2025/fix/missing-include Add missing Wire.h include to sensors	4 weeks ago
Josiah VanderZee	4b6b8abe7a	Add missing Wire.h include for sensors This slipped through in PR #2327 and I noticed because the TechoBoard.h for my variant doesn't include the Wire header, so the source file in question does not coincidentally obtain a copy.	4 weeks ago
Liam Cottle	51665881a2	Merge pull request #2492 from meshcore-dev/set-flood-scope-none Companion: Set flood scope to None	4 weeks ago
Scott Powell	6979326340	* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped * FIRMWARE_VER_CODE bumped to 12	4 weeks ago
Liam Cottle	bf733f00a6	Merge pull request #2488 from weebl2000/fix-rak-pin-gps-en-undefined Gate PIN_GPS_EN	4 weeks ago
ripplebiz	b75cefbfb4	Merge pull request #2327 from NickDunklee/fix-environment-sensor-refactor fix(sensors): improve sensor initialization and handling to prevent hangs and handle growth	4 weeks ago
tuzzmaniandevil	314d777b42	Enhance KissModem frame processing and timeout handling	4 weeks ago
Wessel Nieboer	3bde089bdb	Gate PIN_GPS_EN Do not reference it unconditionally	4 weeks ago
Huw Duddy	6b3df327e9	Merge pull request #2483 from oltaco/dev fix CustomLFS version pinning	4 weeks ago
taco	68ab882cd5	fix CustomLFS version pinning	4 weeks ago
Liam Cottle	19ebd8c795	Merge pull request #2480 from KPrivitt/dev Incorrect time_t TypeDef used in RAK12035_SoilMoisture	4 weeks ago
ripplebiz	f9ddd9da72	Merge pull request #2445 from kizniche/update-docs-txdelay-rxdelay Docs: Add explanatory notes for txdelay, direct.txdelay, and rxdelay	4 weeks ago
ripplebiz	00afb06768	Merge pull request #2475 from uwl-cpe-2025/fix/ST7789-reset-timing Do not perform redundant reset on ST7789 displays	4 weeks ago
Kenneth Privitt	235706a22a	Incorrect time_t TypeDef in RAK12035_SoilMoisture	1 month ago
Josiah VanderZee	e56c1b3d58	Do not perform redundant reset on ST7789 displays The `::init` method in the Adafruit ST7789 library is responsible to initialize the device. This includes performing a reset, which can be found in the Adafruit source for `Adafruit_SPITFT`. Before this change, MeshCore performed its own ST7789 display reset sequence, which consisted of three steps. * Pull reset low * Wait 10ms * Pull reset high Importantly, there was no fixed delay after pulling reset high. The ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode and 120ms in Sleep Out Mode before it will properly receive commands. When `Adafruit_SPITFT` resets the device after MeshCore has already reset it, the mandatory time may not have elapsed, leading to strange behavior. In the author's case, this issue caused the initial `fillScreen` to fail, such that the display showed an uninitialized framebuffer. This removes the MeshCore delay, leaving the responsibility of reset to `Adafruit_SPITFT`, where they have the correct delays in place with extra safety margin. The change was briefly tested by Josiah VanderZee and Ben Zignego on a custom hardware build using an nRF52840 Dongle and an Adafruit 4311 TFT display. The user button seemed to behave strangely, but the display looked correct.	1 month ago
Liam Cottle	e727fd543b	Merge pull request #2462 from meshcore-dev/target-dup-cleanup Refactor: removed duplicated target code	1 month ago
Liam Cottle	679fb9c0ab	Merge pull request #2460 from liamcottle/ui/startup-mute Don't play startup tune if buzzer pref disabled	1 month ago
liamcottle	5a509752a7	don't play startup tune if buzzer pref disabled	1 month ago
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	1 month ago
Liam Cottle	ccda0a99d8	Merge pull request #925 from mtlynch/unit-tests Add unit tests for Utils::toHex	1 month ago
Liam Cottle	9b1ca6b10b	Merge pull request #2456 from Avi0n/docs/fix-typos fix typos in docs	1 month ago
Avi0n	0be082b5f9	fix typos	3 months ago
Liam Cottle	c7c400ed5d	Merge pull request #2428 from recrof/minewsemi-refactor minewsemi: refactor platformio.ini	1 month ago
Rastislav Vysoky	d7e3a9ddba	Merge branch 'dev' into minewsemi-refactor	1 month ago
Liam Cottle	ffbf73dc5c	Merge pull request #2432 from recrof/kiss-radio-everywhere kiss radio: added stm32 support + envs in platformio.ini	1 month ago
Liam Cottle	5c651b35a0	Merge pull request #1954 from OverkillFPV/lora-longer-preamble Lora longer preamble	1 month ago
Liam Cottle	bd90475d72	Merge pull request #2448 from weebl2000/bump-sensor-version bump simple_sensor version to v1.15.0	1 month ago
Liam Cottle	9ce6b49cd3	Merge pull request #2430 from oltaco/use-forked-adafruit-nrf52 Use internal fork of Adafruit nRF52 Arduino	1 month ago
liamcottle	2b0f74a7e9	add comments	1 month ago
Wessel Nieboer	c5bf23f4b1	bump simple_sensor version to v1.15.0	1 month ago
Liam Cottle	daa50e9469	Merge pull request #2426 from recrof/nano-g2-rework make g2 more in line with other variants	1 month ago
Liam Cottle	2522492cd7	Merge pull request #2436 from chrisdavis2110/rak3401-comp-ana-button feat: Add support for PIN_USER_BTN_ANA on rak3401 companion usb and companion ble envs	1 month ago
Kyle	293a8a9a84	docs: add explanatory notes for txdelay, direct.txdelay, and rxdelay CLI commands	1 month ago
Liam Cottle	2f6ca731c8	Merge pull request #2439 from Quency-D/fix-lna Heltec boards have LNA disabled by default.	1 month ago
Quency-D	696aae6ed1	Heltec boards have LNA disabled by default.	1 month ago
chrisdavis2110	5fbd473298	added PIN_GPS_EN=-1 to rak3401 companion usb	1 month ago
chrisdavis2110	0265851621	added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble	1 month ago
Rastislav Vysoky	5beef490a0	add kiss radio env to most of the variants	1 month ago
Rastislav Vysoky	66009069cd	standardize the minewsemi variant	1 month ago
taco	f7d8fa3420	use internal fork of Adafruit nRF52 Arduino	1 month ago
taco	04b69e86be	revert bluefruit patch in preparation to switch to using our own fork of Adafruit NRF52 Arduino with the patch included	1 month ago
Liam Cottle	d8f3d59d82	Merge pull request #2427 from recrof/tabs-to-spaces replace all intendation tabs to spaces in pio ini files	1 month ago
Rastislav Vysoky	b963681830	replace all intendation tabs to spaces in pio ini files	1 month ago

1 2 3 4 5 ...

2797 Commits (716ba8ee5e14b37ed53cd7eb4e6721c483e80fdc) All Branches Search

2797 Commits (716ba8ee5e14b37ed53cd7eb4e6721c483e80fdc)

All Branches