MeshCore

Commit Graph

Author	SHA1	Message	Date
hank	65a28582dd	Add PERM_ACL_REGION_MGR role for delegated region management Introduces a fourth ACL role (value 4) that can manage the region map without full admin privileges. The role is intended for trusted users who curate regions on a repeater but should not have access to general admin commands. ClientACL: - Widen PERM_ACL_ROLE_MASK from 2 to 3 bits so the new value fits. - Add PERM_ACL_REGION_MGR and ClientInfo::isRegionMgr(). - Exempt region_mgr entries from least-recently-active eviction in putClient(), same as admins. simple_repeater: - Phones may still gate UI on the legacy is_admin byte (reply_data[6]), so report region_mgr as admin there. Without this, the phone CLI falls back to guest view. - Allow region_mgr to send TXT_MSG CLI commands. handleCommand() gates non-whitelisted commands with "Err - not permitted". The whitelist covers region.* (read+write) plus a small set of read-only queries (get, ver, board, neighbors, clock, sensor get/list). - Pass the ClientInfo* through to handleCommand and drop the redundant sender_timestamp parameter (derived from sender->last_timestamp; NULL means Serial CLI). - Use ~PERM_ACL_ROLE_MASK instead of ~0x03 when clearing role bits on login, so the wider mask is honored.	2 months ago
Scott Powell	77d02e844f	* bug fix	2 months ago
Scott Powell	df1e12de3e	* Repeater, room server: rule change for sendFloodReply()	2 months ago
Scott Powell	4131a455a2	* repeater: refactored 'region' CLI commands -> CommonCLI * room server: added RegionMap, and new CommonCLI wiring, default_scope handling * sensor: only minimal RegionMap wiring. Still needs work to handle default-scope	2 months ago
Scott Powell	569cfe177a	* repeater: default-scope support	2 months ago
Scott Powell	fcfdc5fc5b	* Repeater and Room Server: flood advert timer now uses the path_hash_mode pref	3 months ago
João Brázio	3e7fb4add1	Add setRxBoostedGain method declaration and implementation for SX1262/SX1268	3 months ago
João Brázio	9a95e25ef2	Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants	3 months ago
João Brázio	f858f2e4bb	Rename sx126x_rx_boosted_gain to rx_boosted_gain	3 months ago
Scott Powell	5684b4f1b8	* LOOP_DETECT_MODERATE bug fix	3 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	4 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	4 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	4 months ago
Scott Powell	5de3e1bf32	* repeater: slight increase to default direct.txdelay	4 months ago
3DPGG	3e53df5082	Fix LilyGo_TLora_V2_1_1_6_terminal_chat build This change addresses two issues. The first is that the LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile simple_repeater/MyMesh.cpp. All other examples of terminal chat targets are instead building simple_secure_chat/main.cpp . This change would align this build to the rest of the builds. The second issue, found during the course of investigating the first, stems from simple_repeater/MyMesh.cpp using the MAX_NEIGHBOURS #define to control whether the neighbor list is kept. Repeaters that keep this list must define this value, and if the value is not defined, then all neighbor-related functionality is compiled out. However, the code that replies to REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define, and thus any target that compiles simple_repeater/MyMesh.cpp without defining MAX_NEIGHBOURS would get an undefined variable compilation error. As a practical matter though, there are no targets that compile simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS, except this build due to the first issue. As a result, the second issue is addressed only as a matter of completeness. The expected behavior with this change is that such a repeater would send a valid reply indicating zero known neighbors.	4 months ago
realtag	0770618ee2	Allow repeater discovery even if repeater mode is disabled on the requesting repeater.	4 months ago
realtag	bf9c6cb50f	Increased the timeout timer to 60 seconds, up from 30 seconds.	4 months ago
realtag	87c78a98bd	discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses	4 months ago
realtag	e8785dd9b0	discover sends a single repeater discovery request and populates the neighbor list; self is excluded	4 months ago
João Brázio	71136671bd	Implement remote lna toggle cli cmd	4 months ago
Wessel Nieboer	c4c287d01b	Bridge always has work (prevents sleep)	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Matthias Wientapper	0805a47f35	Add output of region cmd via lora cli Add cli commands "region list {allowed\|denied}"	5 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	5 months ago
Chris	c16bcd2fe3	Expose a counter to track RadioLib receive errors This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).	5 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	5 months ago
taco	988287bfd7	recalc ClientACL shared_secrets at startup	5 months ago
taco	6336bd5b72	refactor ClientACL and CommonCLI, add ClientACL::clear()	5 months ago
Scott Powell	69a71d0e25	* repeater login response, FIRMWARE_VER_LEVEL now bumped to 2	5 months ago
Scott Powell	b6110eee38	* new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver) * ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit) * ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits * CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set	5 months ago
Scott Powell	4e4f6d92a0	* ANON_REQ_TYPE_VER_OWNER now delimited by newline chars	5 months ago
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	5 months ago
Scott Powell	fd69acb421	* new ANON_REQ_TYPE_VER (for just simple clock + ver info)	5 months ago
Scott Powell	2a035ad816	* ANON_REQ_TYPE_VER_OWNER, now includes node_name	5 months ago
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER * CommonCLI: new "get/set owner.info ..."	5 months ago
Scott Powell	5cc44dd802	* ANON_REQ_TYPE_REGIONS now direct only, with reply_path encoded in request	5 months ago
ViezeVingertjes	eb4fa032ff	Implement token bucket duty cycle enforcement	5 months ago
Scott Powell	3af25495bb	* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins) * Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)	5 months ago
Kevin Le	26321162ee	To fix the default temperature to be overridden by external sensors (if any)	6 months ago
Kevin Le	1706f759b7	Modified hasPendingWork to return bool	6 months ago
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 Added CLI to enable/disable powersaving	6 months ago
Kevin Le	2deb9cf144	Fixed to call getMCUTemperature once.	6 months ago
Kevin Le	4504ad4daf	Added default temperature from ESP32 MCU and NRF52 MCU Added NRF52Board.h and NRF52Board.cpp Modified NRF52 variants to extend from NRF52Board to share common feature	6 months ago
Scott Powell	dc58f0ea83	* BUG FIX: repeater remote admin, flood login should invalidate the client->out_path	7 months ago
taco	5a3ea64a97	Repeater: add adc.multiplier setting	7 months ago
Winston Lowe	031fa1e704	Changed uint to a uint8_t	7 months ago
Scott Powell	ab0721d6df	* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.	7 months ago
Scott Powell	1520f4d28e	* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses	7 months ago
Scott Powell	963290ea15	* repeater: various "region" CLI changes * transport codes 0000 and FFFF reserved	7 months ago

1 2 3

102 Commits (65a28582dde00f8774e8e04b34282341b7ae377a)