MeshCore

Commit Graph

Author	SHA1	Message	Date
ViezeVingertjes	5157daf1c1	Remove individual HW_RESP_* defines, use HW_RESP() macro directly	4 months ago
ViezeVingertjes	00b44c4114	Remove redundant send/complete/finished callbacks, use Radio interface directly	4 months ago
ViezeVingertjes	5ccd99e25f	Add toggleable per-packet signal reporting	4 months ago
ViezeVingertjes	7982d1ce1f	Use high-bit convention for hardware response codes	4 months ago
ViezeVingertjes	49e7516145	Add KISS UART support	4 months ago
agessaman	f445b5acdc	fix(kiss_modem): improve RX delivery and noise floor sampling	4 months ago
ViezeVingertjes	02ddc05c30	Reorganise KISS protocol to close gaps.	4 months ago
ViezeVingertjes	f78617dbdb	Add periodic noise floor calibration and AGC reset	4 months ago
ViezeVingertjes	5dcc377b77	Rewrite KISS modem to be fully spec-compliant	4 months ago
Adam Gessaman	c0b81b9ad8	Clean up comments on kiss noise floor changes.	4 months ago
João Brázio	5cb26b91f6	Refactor Heltec T114 sensor management	4 months ago
agessaman	0fb570338f	fix(kiss): periodic noise floor calibration and AGC reset - Trigger noise floor calibration every 2s and AGC reset every 30s in main loop. - Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset and recvRaw() so RSSI is never sampled right after startReceive(). - Update protocol doc with calibration intervals and typical noise floor range. - Variant platformio.ini updates (heltec_v3, rak4631).	4 months ago
taco	598489be47	refactor ui with ring buffer and display most recent	4 months ago
ViezeVingertjes	f0ba14ff75	Remove sync word handling from KissModem.	4 months ago
taco	a342ab8437	nrf52: allow repeater to sleep when idle	4 months ago
ViezeVingertjes	240b5ea1e3	Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.	4 months ago
ViezeVingertjes	1bcb52bab3	Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.	4 months ago
taco	8d5eaf500d	add makeBlobPath inline helper for esp32	4 months ago
taco	e6e1b810f8	add DataStore::deleteBlobByKey()	4 months ago
ViezeVingertjes	c786cfe613	Add KISS Modem firmware	4 months ago
agessaman	019bbf74d3	Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and Python/TypeScript parsing examples for backward compatibility (accept >=26).	4 months ago
taco	c7eea3915d	fix: remove esp_wifi.h from esp32board.h saves ~500 bytes of dram and allows Tbeam to compile again	4 months ago
Rastislav Vysoky	c345f1da8e	Revert "Remove _serial->isConnected() logic from buzzer notifications"	4 months ago
Scott Powell	465776d667	* ver 1.12.0	4 months ago
Steven Linn	44e7c092c8	Add battery min/max voltage parameter support	4 months ago
Matthias Wientapper	0805a47f35	Add output of region cmd via lora cli Add cli commands "region list {allowed\|denied}"	4 months ago
liamcottle	d13bc446de	added build flag to enable/disable boot advert	4 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	4 months ago
Chris	c16bcd2fe3	Expose a counter to track RadioLib receive errors This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).	4 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	4 months ago
taco	988287bfd7	recalc ClientACL shared_secrets at startup	4 months ago
taco	6336bd5b72	refactor ClientACL and CommonCLI, add ClientACL::clear()	4 months ago
taco	9dd52bd0cc	build fix for room server with MESH_DEBUG=1	4 months ago
Scott Powell	3c27132914	* T1000e BLE - default node name is now the MAC address	4 months ago
nakoeppen	d68bc74514	Remove _serial->isConnected() logic from buzzer notifications	4 months ago
taco	b919119faf	only write contacts when changed	5 months ago
taco	c61fde9328	always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]	5 months ago
taco	df6687034a	bootstrap RTC from contact.lastmod and improve slot overwrite logic slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite	5 months ago
taco	403ce1db08	contacts: granular autoadd and overwrite-oldest	5 months ago
Scott Powell	69a71d0e25	* repeater login response, FIRMWARE_VER_LEVEL now bumped to 2	5 months ago
Scott Powell	b6110eee38	* new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver) * ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit) * ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits * CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set	5 months ago
Scott Powell	4e4f6d92a0	* ANON_REQ_TYPE_VER_OWNER now delimited by newline chars	5 months ago
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	5 months ago
Scott Powell	fd69acb421	* new ANON_REQ_TYPE_VER (for just simple clock + ver info)	5 months ago
Scott Powell	2a035ad816	* ANON_REQ_TYPE_VER_OWNER, now includes node_name	5 months ago
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER * CommonCLI: new "get/set owner.info ..."	5 months ago
Scott Powell	5cc44dd802	* ANON_REQ_TYPE_REGIONS now direct only, with reply_path encoded in request	5 months ago
Scott Powell	3af25495bb	* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins) * Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)	5 months ago
liquidraver	faf177de46	ESP factory reset clear NVS too	5 months ago
entr0p1	4a869163b2	BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).	5 months ago

1 2 3 4 5 ...

723 Commits (5157daf1c1ae341a36d1efa21e307aef6c682321)