MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	5b0884ad2d	* added CMD_SET_PATH_HASH_MODE	3 months ago
Scott Powell	e52d57c065	* companion: new pref: path_hash_mode (0..2) * companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode * companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)	3 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	3 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	4 months ago
Scott Powell	2e00298128	* companion: retransmit delays now hard-coded (only for client repeat mode)	4 months ago
Scott Powell	5de3e1bf32	* repeater: slight increase to default direct.txdelay	4 months ago
3DPGG	3e53df5082	Fix LilyGo_TLora_V2_1_1_6_terminal_chat build This change addresses two issues. The first is that the LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile simple_repeater/MyMesh.cpp. All other examples of terminal chat targets are instead building simple_secure_chat/main.cpp . This change would align this build to the rest of the builds. The second issue, found during the course of investigating the first, stems from simple_repeater/MyMesh.cpp using the MAX_NEIGHBOURS #define to control whether the neighbor list is kept. Repeaters that keep this list must define this value, and if the value is not defined, then all neighbor-related functionality is compiled out. However, the code that replies to REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define, and thus any target that compiles simple_repeater/MyMesh.cpp without defining MAX_NEIGHBOURS would get an undefined variable compilation error. As a practical matter though, there are no targets that compile simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS, except this build due to the first issue. As a result, the second issue is addressed only as a matter of completeness. The expected behavior with this change is that such a repeater would send a valid reply indicating zero known neighbors.	4 months ago
realtag	0770618ee2	Allow repeater discovery even if repeater mode is disabled on the requesting repeater.	4 months ago
realtag	bf9c6cb50f	Increased the timeout timer to 60 seconds, up from 30 seconds.	4 months ago
realtag	87c78a98bd	discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses	4 months ago
realtag	e8785dd9b0	discover sends a single repeater discovery request and populates the neighbor list; self is excluded	4 months ago
Scott Powell	e2571accbe	* ver 1.13.0	4 months ago
Scott Powell	0abac35744	* client_repeat state now in _DEVICE_INFO response	4 months ago
Scott Powell	564a19d125	* companion client repeat mode support	4 months ago
Leah	fb025fb67e	Add muted icon to show when buzzer is muted	4 months ago
liamcottle	bafa2ccd22	fix estimated timeout for multi byte path traces	4 months ago
Wessel Nieboer	e8646f5ede	Parse as signed int	4 months ago
agessaman	776131e263	simplify kiss noise floor sampling	4 months ago
Wessel Nieboer	c4c287d01b	Bridge always has work (prevents sleep)	4 months ago
ViezeVingertjes	f6ebbd978e	Remove redundant locals in handleSetRadio	4 months ago
ViezeVingertjes	5157daf1c1	Remove individual HW_RESP_* defines, use HW_RESP() macro directly	4 months ago
ViezeVingertjes	00b44c4114	Remove redundant send/complete/finished callbacks, use Radio interface directly	4 months ago
ViezeVingertjes	5ccd99e25f	Add toggleable per-packet signal reporting	4 months ago
ViezeVingertjes	7982d1ce1f	Use high-bit convention for hardware response codes	4 months ago
ViezeVingertjes	49e7516145	Add KISS UART support	4 months ago
agessaman	f445b5acdc	fix(kiss_modem): improve RX delivery and noise floor sampling	4 months ago
ViezeVingertjes	02ddc05c30	Reorganise KISS protocol to close gaps.	4 months ago
ViezeVingertjes	f78617dbdb	Add periodic noise floor calibration and AGC reset	4 months ago
ViezeVingertjes	5dcc377b77	Rewrite KISS modem to be fully spec-compliant	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Adam Gessaman	c0b81b9ad8	Clean up comments on kiss noise floor changes.	4 months ago
João Brázio	5cb26b91f6	Refactor Heltec T114 sensor management	4 months ago
agessaman	0fb570338f	fix(kiss): periodic noise floor calibration and AGC reset - Trigger noise floor calibration every 2s and AGC reset every 30s in main loop. - Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset and recvRaw() so RSSI is never sampled right after startReceive(). - Update protocol doc with calibration intervals and typical noise floor range. - Variant platformio.ini updates (heltec_v3, rak4631).	4 months ago
taco	598489be47	refactor ui with ring buffer and display most recent	4 months ago
ViezeVingertjes	f0ba14ff75	Remove sync word handling from KissModem.	4 months ago
taco	a342ab8437	nrf52: allow repeater to sleep when idle	4 months ago
ViezeVingertjes	240b5ea1e3	Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.	4 months ago
ViezeVingertjes	1bcb52bab3	Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.	4 months ago
taco	8d5eaf500d	add makeBlobPath inline helper for esp32	4 months ago
taco	e6e1b810f8	add DataStore::deleteBlobByKey()	4 months ago
ViezeVingertjes	c786cfe613	Add KISS Modem firmware	4 months ago
agessaman	019bbf74d3	Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and Python/TypeScript parsing examples for backward compatibility (accept >=26).	4 months ago
taco	c7eea3915d	fix: remove esp_wifi.h from esp32board.h saves ~500 bytes of dram and allows Tbeam to compile again	4 months ago
Rastislav Vysoky	c345f1da8e	Revert "Remove _serial->isConnected() logic from buzzer notifications"	4 months ago
Scott Powell	465776d667	* ver 1.12.0	4 months ago
Steven Linn	44e7c092c8	Add battery min/max voltage parameter support	4 months ago
Matthias Wientapper	0805a47f35	Add output of region cmd via lora cli Add cli commands "region list {allowed\|denied}"	4 months ago
liamcottle	d13bc446de	added build flag to enable/disable boot advert	4 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	4 months ago
Chris	c16bcd2fe3	Expose a counter to track RadioLib receive errors This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).	4 months ago

1 2 3 4 5 ...

749 Commits (45564bad9b6522a032e40d98cdcf9e83dacae70c)