MeshCore

Commit Graph

Author	SHA1	Message	Date
Daniel Novak	2f8576401e	Merge `b74ba54530` into `adc631f315`	21 hours ago
Liam Cottle	adc631f315	Merge pull request #3048 from entr0p1/fix/startota-failure-recovery nRF52840 "start ota" Failure Recovery	22 hours ago
entr0p1	4050b7d526	nRF52840 "start ota" Failure Recovery If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt. Fixes: - Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.	1 day ago
ripplebiz	c86e63d2f5	Merge pull request #2982 from meshcore-dev/config-serializer Config serializer	2 days ago
ripplebiz	301bc10dd3	Merge pull request #3034 from meshcore-dev/ui-color-refactor UI color refactor	2 days ago
Liam Cottle	cee6d94894	Merge pull request #3040 from blowfishpro/docs/FixPayloadDocsFormatting Increase header levels on "Payloads" documentation page to fix table of contents	2 days ago
Talia	b62b421456	docs: increase header levels on payloads page to fix table of contents mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them	3 days ago
ripplebiz	e3de413a69	Merge pull request #3036 from oltaco/add-preamble-irq-flag Fix missing PREAMBLE_DETECTED IRQ flag for all radio wrappers	4 days ago
taco	6b83de507d	SX1268: add PREAMBLE_DETECTED to reported irq flags	4 days ago
taco	0d2b988f24	STM32WLx: add PREAMBLE_DETECTED to reported irq flags	4 days ago
taco	c56928347f	LLCC68: add PREAMBLE_DETECTED to reported irq flags	4 days ago
taco	ea5d7c8bf5	LR1110: add PREAMBLE_DETECTED to reported irq flags	4 days ago
taco	fae4803158	SX1262: add PREAMBLE_DETECTED to reported irq flags	1 week ago
Scott Powell	f83ad03e5e	* T114 display fix	5 days ago
Scott Powell	0c04a47355	* fixed for mono ST7789 display driver	5 days ago
Scott Powell	3857f45826	* monochrome displays now do _not_ invert titlebar	5 days ago
Scott Powell	ee79df4c4f	Merge branch 'dev' into config-serializer # Conflicts: # test/mocks/Arduino.h # test/mocks/Stream.h	5 days ago
Liam Cottle	e780cca237	Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276 Increase LilyGo T-Beam SX1276 channels from 8 to 40	5 days ago
liamcottle	520fa77f4f	increase tbeam sx1276 max group channels from 8 to 40	5 days ago
Liam Cottle	d531a98da1	Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure fix: prevent ESP32 KISS modem stalls under USB backpressure	5 days ago
Liam Cottle	8a69f34101	Merge pull request #3023 from agessaman/fix/rx-boosted-gain fix(room_server): support RX boosted gain	6 days ago
Scott Powell	56274db4ad	* build fixes for old ESP32 boards	7 days ago
Scott Powell	a96a66aa99	* build fixes for NullDisplayDriver	7 days ago
Scott Powell	b8504e55c6	* refactor of Color mapping in UITasks / DisplayDrivers * color displays now with a new light theme	7 days ago
agessaman	a71cc23854	fix(room_server): support RX boosted gain The room server never supported RX boosted gain, while the repeater does. Three consequences on SX1262/SX1268 boards: - boosted gain was never applied to the radio at boot, so a room server ran in power-saving RX mode while an identical repeater ran boosted - a real receive-sensitivity difference with nothing pointing at it - _prefs.rx_boosted_gain was never initialised (the prefs are memset to 0 before defaults are set), so it defaulted to off - 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had already written the value to prefs and saved them, so a stale setting survived reboot and was never applied Mirror the repeater's implementation: initialise the pref default under the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply it during radio init, and override setRxBoostedGain() so the CLI reports success and takes effect. Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server (guards compile out cleanly).	1 week ago
Scott Powell	78240e9477	* optimised: value-init not needed	1 week ago
ripplebiz	4157e43ace	Merge pull request #3005 from axhoff/agent/fix-ble-reconnect Fix bonded BLE reconnects on ESP32	1 week ago
ripplebiz	8b048ab19a	Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue Synchronize the ESP32 BLE receive queue	1 week ago
ripplebiz	6a15e1712b	Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion Enable hardware USB serial on Heltec V4	1 week ago
Liam Cottle	7124fa1439	Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)	1 week ago
Alexander Hoffer	4d4d7c3746	refactor: use FreeRTOS BLE receive queue	1 week ago
=UltimateCodeWarrior	0de2b4fc5f	Move Supreme OLED address to variant config Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.	1 week ago
fdlamotte	d2fd1fdaa6	Merge pull request #2887 from spinda/thinknode-m3-dev Fix GPS and LEDs on ThinkNode M3	1 week ago
fdlamotte	427cd7c263	Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals NRF52Board - ShutdownPeripherals() housekeeping	1 week ago
Alexander Hoffer	9fd6b419e5	fix: preserve bonded BLE reconnects	1 week ago
Alexander Hoffer	60030469c9	fix: enable Heltec V4 USB serial	1 week ago
Alexander Hoffer	3885c67c8e	fix: synchronize BLE receive queue	1 week ago
Liam Cottle	da67328017	Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn Fix Xiao nRF52840 repeater compile failure	1 week ago
entr0p1	d2bbe4d8d3	Fix Xiao nRF52840 repeater compile failure Compile fails due to user_btn not declared in board target. Fixes: - Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp - Add momentary button helper include in variants/xiao_nrf52/target.h - Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h	1 week ago
Liam Cottle	a45dae928c	Merge pull request #3000 from oltaco/rx-irq-timeout fix: clear the correct IRQ flag for timeout on preamble detected on SX1262	1 week ago
taco	ab5c45f516	fix: clear the correct IRQ flag for timeout on preamble detected	1 week ago
Liam Cottle	c1ee9cad5b	Merge pull request #2998 from oltaco/heltec-t1-bodmer Fix: Heltec t1: add missing bodmer TFT_eSPI library	1 week ago
taco	91e65af9dd	fix: heltec t1: add missing bodmer TFT_eSPI library	1 week ago
Liam Cottle	2834121b6e	Merge pull request #2994 from oltaco/rx-irq-timeout Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110	1 week ago
taco	121b72712b	LR1110: add setter methods for preambleMillis and payloadMillis	1 week ago
taco	ae48072ff0	SX1262: add setter methods for preambleMillis and payloadMillis	1 week ago
Liam Cottle	fdd4d8a610	Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build Fix nRF52 builds broken by unconditional RAK Ethernet include	1 week ago
liamcottle	8c987c8689	Merge remote-tracking branch 'official/main' into dev	1 week ago
ripplebiz	dc7dd5105e	Merge pull request #2977 from oltaco/rx-irq-timeout Add IRQ timeout logic for SX1262 and LR1121	1 week ago
Ryan Gregg	cc221330ba	Fix nRF52 builds: guard SerialEthernetInterface with ETHERNET_ENABLED SerialEthernetInterface.cpp is compiled for every nRF52 target because PlatformIO builds all .cpp files under src/. It includes SerialEthernetInterface.h, which unconditionally pulls in <RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114) fails to build with 'RAK13800_W5100S.h: No such file or directory'. Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they compile to empty translation units on non-Ethernet builds. RAK4631 Ethernet envs define ETHERNET_ENABLED and are unaffected. Fixes #2985	1 week ago

1 2 3 4 5 ...

3231 Commits (2f8576401e8b03edc32a0dbb6ebeeb9130aad95d) All Branches Search

3231 Commits (2f8576401e8b03edc32a0dbb6ebeeb9130aad95d)

All Branches