MeshCore

Commit Graph

Author	SHA1	Message	Date
Wessel Nieboer	13d0f5e01d	fix out_frame buffer overflow in companion radio response handlers The onContactResponse handler copies peer response data into out_frame (MAX_FRAME_SIZE + 1 bytes) without checking whether the data fits. A peer response with len close to MAX_PACKET_PAYLOAD (184) writes up to 188 bytes into the 173-byte buffer, overflowing by 15 bytes. This affects the status response, telemetry response, and binary response code paths. A malicious peer can trigger the overflow by sending a large response payload, corrupting the stack. Cap each memcpy to the remaining space in out_frame before copying.	6 months ago
Scott Powell	78240e9477	* optimised: value-init not needed	2 weeks ago
ripplebiz	4157e43ace	Merge pull request #3005 from axhoff/agent/fix-ble-reconnect Fix bonded BLE reconnects on ESP32	2 weeks ago
ripplebiz	8b048ab19a	Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue Synchronize the ESP32 BLE receive queue	2 weeks ago
ripplebiz	6a15e1712b	Merge pull request #3006 from axhoff/agent/fix-heltec-v4-usb-companion Enable hardware USB serial on Heltec V4	2 weeks ago
Liam Cottle	7124fa1439	Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)	2 weeks ago
Alexander Hoffer	4d4d7c3746	refactor: use FreeRTOS BLE receive queue	2 weeks ago
=UltimateCodeWarrior	0de2b4fc5f	Move Supreme OLED address to variant config Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.	2 weeks ago
fdlamotte	d2fd1fdaa6	Merge pull request #2887 from spinda/thinknode-m3-dev Fix GPS and LEDs on ThinkNode M3	2 weeks ago
fdlamotte	427cd7c263	Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals NRF52Board - ShutdownPeripherals() housekeeping	2 weeks ago
Alexander Hoffer	9fd6b419e5	fix: preserve bonded BLE reconnects	2 weeks ago
Alexander Hoffer	60030469c9	fix: enable Heltec V4 USB serial	2 weeks ago
Alexander Hoffer	3885c67c8e	fix: synchronize BLE receive queue	2 weeks ago
Liam Cottle	da67328017	Merge pull request #2990 from entr0p1/fix/xiao-nrf52-userbtn Fix Xiao nRF52840 repeater compile failure	2 weeks ago
entr0p1	d2bbe4d8d3	Fix Xiao nRF52840 repeater compile failure Compile fails due to user_btn not declared in board target. Fixes: - Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp - Add momentary button helper include in variants/xiao_nrf52/target.h - Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h	2 weeks ago
Liam Cottle	a45dae928c	Merge pull request #3000 from oltaco/rx-irq-timeout fix: clear the correct IRQ flag for timeout on preamble detected on SX1262	2 weeks ago
taco	ab5c45f516	fix: clear the correct IRQ flag for timeout on preamble detected	2 weeks ago
Liam Cottle	c1ee9cad5b	Merge pull request #2998 from oltaco/heltec-t1-bodmer Fix: Heltec t1: add missing bodmer TFT_eSPI library	2 weeks ago
taco	91e65af9dd	fix: heltec t1: add missing bodmer TFT_eSPI library	2 weeks ago
Liam Cottle	2834121b6e	Merge pull request #2994 from oltaco/rx-irq-timeout Add setter methods for preambleMillis and maxPayloadMillis on SX1262 and LR1110	2 weeks ago
taco	121b72712b	LR1110: add setter methods for preambleMillis and payloadMillis	2 weeks ago
taco	ae48072ff0	SX1262: add setter methods for preambleMillis and payloadMillis	2 weeks ago
Liam Cottle	fdd4d8a610	Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build Fix nRF52 builds broken by unconditional RAK Ethernet include	2 weeks ago
liamcottle	8c987c8689	Merge remote-tracking branch 'official/main' into dev	2 weeks ago
ripplebiz	dc7dd5105e	Merge pull request #2977 from oltaco/rx-irq-timeout Add IRQ timeout logic for SX1262 and LR1121	2 weeks ago
Ryan Gregg	cc221330ba	Fix nRF52 builds: guard SerialEthernetInterface with ETHERNET_ENABLED SerialEthernetInterface.cpp is compiled for every nRF52 target because PlatformIO builds all .cpp files under src/. It includes SerialEthernetInterface.h, which unconditionally pulls in <RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114) fails to build with 'RAK13800_W5100S.h: No such file or directory'. Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they compile to empty translation units on non-Ethernet builds. RAK4631 Ethernet envs define ETHERNET_ENABLED and are unaffected. Fixes #2985	2 weeks ago
entr0p1	aee53a8c3e	NRF52Board - ShutdownPeripherals() housekeeping Improvements: - Add condition to only turn off display if on (avoids wedging the shutdown on some displays) - Reset LoRa radio before calling radio_driver.powerOff() to ensure it is in a known good state (and will accept the command) - Ensure SPI is started so LoRa radio commands can be sent (some shutdowns can happen before this) - Add gate for P_LORA_NSS pin defined before writing to the pin	2 weeks ago
taco	b28bf00348	fix: setMaxPacketMillis() should return void	2 weeks ago
Liam Cottle	a3a1aa5e3b	Merge pull request #1865 from MeshEnvy/fix/python-json-parse-error fix: JSON parsing regression in build.sh	2 weeks ago
ripplebiz	795989b918	Merge pull request #2966 from Quency-D/heltec-rc32 Add Heltec rc32 board	2 weeks ago
fdlamotte	4aec46b039	Merge pull request #2976 from fdlamotte/UITask_poweroff_radio_display UI task: poweroff of radio and display moved to board	2 weeks ago
Florent	c644720ea7	uitask: screen and radio poweroff moved to board	2 weeks ago
fdlamotte	8f5a393404	Merge pull request #2975 from fdlamotte/nrf52_boards--use-shutdownPeripherals-on-TInpulse-and-TEchoBoard nrf52_variants: override shutdownPeripherals instead of powerOff for …	2 weeks ago
taco	0bd871cde6	add IRQ timeout logic for LR11X0	2 weeks ago
Florent	84d1e24338	nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate)	2 weeks ago
taco	79ef74ea8d	add IRQ timeout logic for SX1262	2 weeks ago
fdlamotte	3a67685597	Merge pull request #2883 from fdlamotte/repeater_btn repeater: poweroff on long press	2 weeks ago
taco	975a673efd	add calcMaxPacketMillis	2 weeks ago
fdlamotte	76c6e73fb6	Merge branch 'dev' into repeater_btn	2 weeks ago
fdlamotte	3eb5451d3e	Merge pull request #2906 from fdlamotte/shutdown_peripherals Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown	2 weeks ago
Quency-D	fd7b35f457	Move the rotation input to target.cpp	2 weeks ago
Quency-D	b26f53a263	Avoid waking display from rotary input	2 weeks ago
ripplebiz	41f4d6bd91	Merge pull request #2560 from Quency-D/heltec-v4-r8 Add heltec-v4-r8 board	2 weeks ago
Quency-D	61a8821d3c	Optimize battery voltage reading	2 weeks ago
Quency-D	a472cd7956	Delete duplicate pin definitions	2 weeks ago
Quency-D	3469e92458	Enable patch reception	2 weeks ago
Quency-D	05d4bd2f7f	Add a rotary encoder	2 weeks ago
ripplebiz	b55d69e57a	Merge pull request #1983 from rgregg/rak-ethernet Support for RAK ethernet module	2 weeks ago
Liam Cottle	1831349e5a	Merge pull request #2897 from yarda/companion-add-mcu-temp-sensor Added MCU temp sensor to the companion	2 weeks ago
Quency-D	6c9f0907ee	Merge pull request #17 from meshcore-dev/dev merge Dev	2 weeks ago

1 2 3 4 5 ...

3194 Commits (13d0f5e01d146cc67b3528663a9813621efc06a1) All Branches Search

3194 Commits (13d0f5e01d146cc67b3528663a9813621efc06a1)

All Branches