MeshCore

Commit Graph

Author	SHA1	Message	Date
Frieder Schrempf	11f119a7fb	variants: XIAO NRF52: Enable DC/DC regulator This reduces the power consumption by approximately 25%. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	b9b82fcf1b	variants: WisMesh Tag: Enable status LED Use the blue LED as status LED. This prevents the blue LED from being always-on and draining the battery. Instead use it as status LED with blink patterns as other companion devices do. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	0f565323a0	variants: WisMesh Tag: Enable DC/DC regulator According to the documentation and experiments on other boards using NRF52 + SX1262 this reduces the power consumption significantly. This assumes that the hardware actually has the inductor for the internal DC/DC regulator populated which is very likely. Even if not, it won't hurt. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Jaroslav Škarvada	07e7e2d44b	companion: Suspend radio when hibernating This should significantly reduce power consumption in hibernation. Fixes: #1014 Signed-off-by: Jaroslav Škarvada <[email protected]> Signed-off-by: Frieder Schrempf <[email protected]> # generalize for all radios and UIs	7 months ago
ripplebiz	f5a56c537f	Merge pull request #1113 from recrof/bme280_fix fix: make bme280 sensor usable again	7 months ago
recrof	88a6141943	fix: move bme680 detection before bme280	7 months ago
ripplebiz	459169e8cb	Merge pull request #1092 from liquidraver/rakgps Fix RAK4631 GPS UART pin macros for L76K to work	7 months ago
ripplebiz	caf421b591	Merge pull request #1106 from oltaco/keepteen-lt1 Add support for Keepteen LT1	7 months ago
Florent	838e83b3b5	xiao_s3: relocate serial pins on repeater_bridge_rs232 * conflicts with i2c pins that are documented on the same pins * this is a commented target	7 months ago
Florent	3dd6dc02ea	xiao_s3: use environment sensor manager and add sensor role	7 months ago
taco	bc2256f232	Keepteen LT1: remove terminal_chat and sensor targets	7 months ago
taco	2058af8453	initial support: Keepteen LT1	7 months ago
ripplebiz	8dbb0f5f23	Merge pull request #1071 from tpp-at-idx/thinknode_m2 Thinknode_M2: better battery reading accuracy and no display on powerup fix	7 months ago
ripplebiz	ff67c786ef	Merge pull request #985 from liquidraver/dev3 Fix reversed GPS PINs on G2 and enable timesync	7 months ago
ripplebiz	11a0bd6ef1	Merge pull request #1035 from liquidraver/devt114 Add Heltec T114 GPS + timesync	7 months ago
Liam Cottle	9bfbb777a1	Merge pull request #1100 from stphnrdmr/dev Allow SF smaller than 7 to be saved	7 months ago
Stephan Rodemeier	16c294ce60	Allow SF smaller than 7 to be saved	7 months ago
Scott Powell	91e9fcea4b	* ver 1.10.0	7 months ago
fdlamotte	750e955f19	Update library.json to latest libs and version	7 months ago
ripplebiz	a5cdc88fe2	Merge pull request #1064 from recrof/esp_contacts_350_channels_40 set max contacts to 350 and channels to 40 for esp32c3, s3 and c6	7 months ago
ripplebiz	ba6b8535c9	Merge pull request #971 from fdlamotte/remove_set_setting_by_key SensorManager: remove setSettingByKey	7 months ago
liquidraver	b0ce00652f	Fix RAK4631 GPS UART pin macros	7 months ago
Florent	90e26129ee	Merge branch 'dev' into remove_set_setting_by_key	7 months ago
Scott Powell	b59d1999e6	* Sensor: DISCOVER_REQ, prefix_only support	7 months ago
ripplebiz	74f136ba7a	Merge pull request #1068 from fdlamotte/sensor_control_data sensor: copy control data code from repeater	7 months ago
Scott Powell	ab0721d6df	* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.	7 months ago
Scott Powell	b31d3e7b5f	* added StrHelper::fromHex()	7 months ago
Tomas P	a0bf66f9d8	Fix for display not coming on after poweron	7 months ago
Tomas P	429f82106b	tweak getBattMilliVolts to report battery more accurately	7 months ago
Tomas P	c0a51aff66	change ADC_MULTIPLIER to better reflect battery voltage	7 months ago
Scott Powell	1520f4d28e	* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses	7 months ago
Scott Powell	62d7ce110b	* packet format docs updated	7 months ago
Scott Powell	28b90c18cf	Merge branch 'transportcodes' into dev	7 months ago
Scott Powell	963290ea15	* repeater: various "region" CLI changes * transport codes 0000 and FFFF reserved	7 months ago
Florent	06825030e5	sensor: copy control data code from repeater	7 months ago
Scott Powell	2e63499ae5	* companion: protocol ver bumped to 8.	7 months ago
Scott Powell	4a5404d997	* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA	7 months ago
Scott Powell	ddac13ae80	* repeater: CLI, added "region put" and "region remove" commands	7 months ago
Scott Powell	256848208d	* repeater: onAnonDataRecv(), future code check bug fix (offset 4) * sensor: onAnonDataRecv(), future request code provision	7 months ago
Scott Powell	09eab330a2	* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes) * repeater: DISCOVER requests now with a simple RateLimiter (max 4, every 2 minutes)	7 months ago
Scott Powell	cf547da857	* RegionMap: get/set Home Region * repeater: admin CLI, changed "allowf ", "denyf ", added "home"	7 months ago
ripplebiz	a9d245fe68	Merge pull request #1038 from adam2872/Analogue-button-fix-for-new-UI Analogue user button fix for new UI	7 months ago
ripplebiz	23783b27c8	Merge pull request #1058 from dotdavid/dev Fix Xiao S3 WIO board name	7 months ago
Scott Powell	7419ed71f7	* region filtering now applied in allowPacketForward()	7 months ago
Scott Powell	82b4c1e6b0	* new PAYLOAD_TYPE_CONTROL (11) * repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only) * node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )	7 months ago
Scott Powell	3ef53e64a1	* is_name_char() bug fix	7 months ago
Scott Powell	937865c8fd	* companion: new CMD_SET_FLOOD_SCOPE (54)	7 months ago
Scott Powell	9ebeb477aa	* RegionMap: inverted 'flags' to _deny_ bits * Mesh: new filterRecvFloodPacket() for overriding * repeater CLI: 'allow' -> 'allowf' or 'denyf'	7 months ago
recrof	04c0c40b39	set max contacts to 350 and channels to 40 for esp32c3, s3 and c6	7 months ago
David Hall	c3dbec41ba	Fix manufacturer name on Seeed Xiao S3 WIO	7 months ago

1 2 3 4 5 ...

1929 Commits (11f119a7fb7f868d276d495abd7c8755db234e08) All Branches Search

1929 Commits (11f119a7fb7f868d276d495abd7c8755db234e08)

All Branches