MeshCore

Commit Graph

Author	SHA1	Message	Date
AI7NC	0228d596e8	Apply suggestion from @weebl2000 Co-authored-by: Wessel <[email protected]>	3 months ago
AI7NC	721c21f1e5	Apply suggestion from @weebl2000 Co-authored-by: Wessel <[email protected]>	3 months ago
AI7NC	d2a6fda8d5	Update cli_commands.md	3 months ago
AI7NC	992cc083e6	Update cli_commands.md to include path.hash.mode and loop.detect Adding the new repeater cli commands introduced in 1.14 Ref: https://buymeacoffee.com/ripplebiz/path-diagnostics-improvements	3 months ago
Scott Powell	9f1a3eafcc	Merge branch 'dev' # Conflicts: # docs/cli_commands.md	3 months ago
Scott Powell	3fe2dd7f48	* ver 1.14.0	3 months ago
Scott Powell	5684b4f1b8	* LOOP_DETECT_MODERATE bug fix	3 months ago
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Liam Cottle	3031deb980	Merge pull request #1811 from robekl/docs_update_cli_commands docs: correct CLI command forms and targeted typos	3 months ago
Liam Cottle	dc9e7abacc	Merge pull request #1490 from mesher-de/feature-0hop-cli Add CLI-command for zerohop advert	3 months ago
Liam Cottle	044c66e261	Merge pull request #1001 from kallanreed/fix_gps_debug_logging Use correct macro for GPS logging test	3 months ago
Liam Cottle	3e5522fcde	Merge pull request #1901 from weebl2000/fix-ikoka-handheld-build Fix ikoka handheld build	3 months ago
Wessel Nieboer	c0c9c17cf5	and buildscript	3 months ago
Wessel Nieboer	780720c117	and board!	3 months ago
Wessel Nieboer	90fcd1043f	Fix ikoka handheld build The extends was wrong.	3 months ago
Liam Cottle	cdd3d5f34e	Merge pull request #1841 from weebl2000/nit-prefs prefs is 5 char length :nerd:	3 months ago
ripplebiz	7c594ebc50	Merge pull request #1743 from weebl2000/fixagcreset fix agc reset on SX126x, SX1276 & LR11x0 chips	3 months ago
Liam Cottle	ba3d9e264e	Merge pull request #1836 from weebl2000/fix-rak3401-sky66122-11-fem Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA/LNA operation	3 months ago
Liam Cottle	d7ad89046b	Merge pull request #1633 from weebl2000/fix/gps-uart-power-leak Fix GPS UART consuming +8mA when disabled (nRF52)	3 months ago
Liam Cottle	67779aded8	Merge pull request #1600 from weebl2000/heltec_deep_sleep_lna Hold GC1109 PA_POWER during deep sleep for LNA RX wake	3 months ago
Liam Cottle	bbd621ba85	Merge pull request #1351 from weebl2000/heltec_wireless_tracker_gps Support GPS properly on Heltec Wireless Tracker v1.x	3 months ago
ripplebiz	6431cd2d47	Merge pull request #1900 from wbijen/feature/contact-filter-by-hops Add configurable max hops filter for auto-add contacts	3 months ago
Wouter Bijen	1d190ad944	Clamp max_hops to 64 to cover full protocol hop range (0-63)	3 months ago
Wouter Bijen	2cb08775c0	Clarify comment wording: 1 = direct (0 hops) Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	c016db86d5	Address PR review: subtract-1 encoding and clamp max_hops - Change > to >= so stored value 1 means direct/0-hop only (liamcottle) - Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl) - Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	00566741f6	Add configurable max hops filter for auto-add contacts Filter auto-add of new contacts by hop count (issues #1533, #1546). Setting is configurable from the companion app via extended CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops). Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wessel Nieboer	8a9a0dca5f	Fix GPS +8mA power leak when disabled (nRF52) On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN. MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3 rail) but stop() never set it back LOW, leaving the GPS module powered even when disabled. Assert reset pin in stop() to mirror begin(), and guard _location->loop() behind gps_active check. Fixes meshcore-dev/MeshCore#1628	4 months ago
Wessel Nieboer	59d9770ab9	Add GPS support Heltec Wireless Tracker v1.x Pin mapping verified against HTIT-Tracker V0.5 schematic: - GPIO35 (GPS_EN): N-ch MOSFET drives P-ch high-side switch, active HIGH - GPIO36 (GPS_RST): hardware reset, active LOW - GPIO33/34: UART TX/RX Delegates power management to MicroNMEALocationProvider begin()/stop() which independently controls GPS power via GPS_EN and shares VEXT with the display through RefCountedDigitalPin.	5 months ago
Wessel Nieboer	9bae9d0ed2	fix comment, we know the band now after checking LR1110 user manual	3 months ago
Wessel Nieboer	85f764a114	Calibrate configured frequency for AGC reset	3 months ago
Wessel Nieboer	f54948e06d	Also implement LR11x10 AGC reset Similar to SX126x but simpler.	3 months ago
Wessel Nieboer	b2032e11b6	make it more dry	4 months ago
Wessel Nieboer	9106ab46e1	reset noise_floor sampling after agc reset	4 months ago
Wessel Nieboer	a2dc2eb50c	when doing AGC reset, call Calibrate(0x7F) 1. warm sleep 2. wake to stdby 3. Calibrate(0x7F) to reset all internal blocks 4. re-apply DIO2 RF / boosted gain & register patch to make sure everything is as it was	4 months ago
Wessel Nieboer	f81ec4b14c	fix agc reset	4 months ago
Wessel Nieboer	49d8313501	Fix pin mapping & TX switch (it's DIO2)	3 months ago
Wessel Nieboer	5a5568ed56	Drive CTX low first	3 months ago
Wessel Nieboer	ac2aa03b09	Add SX126X_REGISTER_PATCH for RAK3401	3 months ago
Wessel Nieboer	70f1ad4aeb	Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA and LNA operation The RAK13302 1W module uses a Skyworks SKY66122-11 front-end module with three digital control pins (CSD, CTX, CPS) that must be actively driven by the host MCU. The previous code only managed CTX (GPIO 31) — toggling it for TX/RX — but never initialized CSD (GPIO 24) or CPS (GPIO 21), leaving them floating with no pull-up/pull-down resistors on the PCB. With floating CSD and CPS, the SKY66122 was in an undefined operating mode: - The 30 dB TX PA may not have been reliably engaging - The 16 dB RX LNA was never reliably active, degrading receive sensitivity	3 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	3 months ago
Wessel Nieboer	2bb6f636a4	Add 1ms delay after powering PA (cold-boot)	4 months ago
Wessel Nieboer	329e408197	Hold GC1109 PA_POWER during deep sleep for LNA RX wake The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep to keep the LNA active, enabling proper RX sensitivity for wake-on-packet. Without this, the LNA is unpowered during sleep and RX wake sensitivity is degraded by ~17dB. Release RTC holds in begin() after configuring GPIO registers (not before) to ensure glitch-free pin transitions on wake. Trade-off: ~6.5mA additional sleep current for significantly improved wake-on-packet range.	4 months ago
fdlamotte	06ab9f7f6b	Merge pull request #1871 from enricolorenzoni59/gps-sync-reply `gps sync` reply: fill buffer with text	3 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	3 months ago
Liam Cottle	eee42c5099	Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4	3 months ago
Scott Powell	b67decfba0	* bug fix: Packet::writeTo(), Packet::readFrom()	3 months ago
Scott Powell	ca81f645ed	Merge branch 'multibyte-paths' into dev	3 months ago
ripplebiz	5280433098	Merge pull request #1820 from recrof/patch-1 Update default preset to EU/UK (Narrow)	3 months ago
Scott Powell	def01889aa	Merge branch 'dev' into multibyte-paths	3 months ago
Scott Powell	8737c64fdb	* Packet::copyPath() fix	3 months ago

1 2 3 4 5 ...

2444 Commits (0228d596e8aef95d32596b407f14874ac08df6fb) All Branches Search

2444 Commits (0228d596e8aef95d32596b407f14874ac08df6fb)

All Branches