MeshCore

Commit Graph

Author	SHA1	Message	Date
liamcottle	a99f4a0160	increase thinknode m7 max neighbours to 50	7 days ago
Scott Powell	1bdacb3247	* trying to get Heltec Tracker and Tracker V2 working	1 week ago
liamcottle	87bf371cd3	initial support for thinknode m9	1 week ago
Jody Bentley	1429d75f57	ThinkNode M6/M1 room_server: set ROOM_PASSWORD default Without ROOM_PASSWORD the guest password defaults to empty, and a client sending a blank password is granted read+write access (can post). Every other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1 were the only two shipping an open room. Default them to "hello" to match the rest of the tree; operators can still change it at runtime with 'set guest.password'.	1 week ago
Alex Beal	eb97a375d3	Add an instance of ExternalWatchdogManager to Tower V2	1 week ago
Jody Bentley	6343d8d96e	ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1 and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay (examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the serial console (MicroNMEALocationProvider.h). Every sibling repeater env (M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env in this same file already has them commented. Comment them out to match.	1 week ago
Alex Beal	47e1ce5bae	Update #defines External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.	1 week ago
Wessel Nieboer	4605d3b6ce	fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers	2 weeks ago
entr0p1	7f8522a362	Heltec T114 - nRF52840 DC-DC Regulator - Enable DC-DC regulator on nRF52840 for Heltec T114 board (idle current reduced from ~12mA to ~9mA)	2 weeks ago
Florent	fec88e1300	fix tenstar c3 repeater build	2 weeks ago
entr0p1	4fafcd0e23	Lilygo T-Echo Lite - Enable nRF52840 DC-DC - board idle usage reduced from ~12mA to ~7mA	2 weeks ago
Scott Powell	cea246d0eb	* super fast ST7735 display driver	2 weeks ago
entr0p1	584f9e909b	Lilygo T-Echo Lite - Change SX1262 to use LDO instead of DC-DC (DCC pin on SX1262 not wired in, according to schematic)	2 weeks ago
Kevin Le	35f654ced3	Fixed hibernate/powerOff for ESP32 boards to stay at uA	2 weeks ago
Kevin Le	eec75eab31	Cleanup Poweroff for NRF52 boards	2 weeks ago
ViezeVingertjes	b8f1fad654	Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds	4 weeks ago
ViezeVingertjes	eb938a9b78	Address review comments and sync with dev	2 months ago
ViezeVingertjes	69df5c7a95	Remove NeoPixel configuration as its unused.	6 months ago
ViezeVingertjes	9c7d71b9be	Added support for the nibble zero connect	8 months ago
liamcottle	b975180fc8	initial support for elecrow thinknode m7	4 weeks ago
Kevin Le	62849ef114	Fixed GPS time sync for Heltec T114	4 weeks ago
taco	dd9b3b32c3	build fix for Heltec Mesh Solar and Mesh Pocket	1 month ago
Quency-D	1c4c995a41	Fix low power consumption issues	1 month ago
Quency-D	d2d3d44c9b	Add maximum power limit	1 month ago
Quency-D	fe56d01da2	add tower v2 PA control	1 month ago
taco	b4b0a0ee0f	build fixes for nibble_screen_connect and thinknode_m2	2 months ago
taco	7ce8b66718	build fix for rp2040 companion usb	2 months ago
taco	33ce1c991c	add missing radio_init() for rak11310	2 months ago
taco	2a8bd3edad	pin platform-raspberrypi to 4e22a0d pins framework-arduinopico @ 1.50600.0+sha.6a1d13e9	2 months ago
taco	2f221acd37	build fixes for LilyGo T-Echo Card	2 months ago
entr0p1	12f069b513	Rak WisMesh Tag fixes - Remove debug flag - Correct lib_deps from rak4631 to rak_wismesh_tag - Correct extends from rak4631 to rak_wismesh_tag	2 months ago
Florent	b8f2841cb5	stm32: make subghz dep fix global and update framework	2 months ago
Leo	1b17b083ec	fix: update wio-e5-mini pio config to address SubGhz dependency issue	2 months ago
Kevin Le	daaeaafca1	Moved LoRa GPIOs to platformio.ini for TBeam boards	5 months ago
Kevin Le	71e044ff60	Added getIRQGpio to return DIO0 for Lilygo TLoRa SX1276	5 months ago
Kevin Le	f576767d28	Added getIRQGpio to return DIO0 for Lilygo T3S3 SX1276	5 months ago
Kevin Le	cd964cd9c7	Fixed DIO0, DIO1 and RESET for Heltec v2	5 months ago
Nick Dunklee	59cee5c8a0	feat: Integrate BME680 Bosch BSEC support for RAK4631 This is a consolidation of my changes for BME680 on RAK4631 nodes. I will close my other PRs related to this and link back to this one. Background on change: This change replaces the Adafruit BME680 driver on RAK4631 with the Bosch BSEC library. Other boards continue to use the existing Adafruit path via ENV_INCLUDE_BME680. This makes the IAQ portion of the sensor functional, and more accurate. It also contains the math and/or CayenneLPP fixes from my other PRs. The Bosch code also appears to handle calibrating sensor aging as well, whereas the Adafruit code is just looking at blind values that can drift with time. Pretty cool to see this shooting out useful data! RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while leaving the Adafruit code for other node types. (If this becomes applicable for other node types in future, awesome! I just don't have hardware to test against.) Using the BSEC library introduces IAQ sensor calibration, and saves the calibration state periodically so it does not have to calibrate again later. At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline, then starts calibrating. Once calibrated, it will save those settings and will only write settings again if calibration falls back and restores back to state 3. This fix also has the gas resistance math fix that was in [pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so the adafruit path also can at least show accurate values instead of looping negative. Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps. Fixes/Changes: - Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile - BSEC init applies setConfig() for voltage-correct heater targeting - IAQ, heat-compensated temperature/humidity, pressure, and altitude reported over CayenneLPP - IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3) - Calibration state persisted to /bsec_state.bin on nRF52 internal flash; written only when iaqAccuracy improves to >= 2, should keep write frequency well within flash endurance over device lifetime - Fix non-BSEC query_bme680: float pressure division, addGenericSensor for gas resistance (was addAnalogInput, overflows at > 327 Ohm) - loop() correctly gated for both GPS and BSEC-only builds - Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI mismatch in Bosch's PlatformIO packaging, silly Bosch One general note outside of this code change: I noticed while BME680 _functions_ in companion nodes, since companion nodes run Bluetooth, BLE preempts the CPU, and can do so mid-I2C-transaction. This can cause the BME680 to see an anomaly and drop calibration and start a recalibrate. This is behavior that will exist (and has existed) regardless of using the Adafruit or Bosch paths. This particular companion behavior does not seem to occur in sensor or repeater nodes since their BLE is off. Probably affects other I2C devices as well. Tests: - RAK19003 - RAK19007 - RAK19001 - repeater, sensor, companion	2 months ago
me	2df944d48d	feat(xiao_s3): add kiss modem env	2 months ago
taco	efaf95d685	fix debug params for t-echo card	2 months ago
taco	7c8d84ffb5	remove deprecated functions, fix typo and style	2 months ago
taco	9f683975c1	add torch	2 months ago
taco	8540c98947	add tinyui for lilygo t-echo card	2 months ago
taco	1e740d30f2	initial t-echo card support	2 months ago
Mark Jocas	63fe3d42a2	Corrects typos and grammatical errors Improves readability across documentation and inline comments by fixing common spelling mistakes and duplicate words.	2 months ago
csrutil	0cf4d422a8	Add Heltec T096 sensor environment	2 months ago
Kevin Le	f29cae602f	Added flash_mode=dio to avoid boot loop when flashing using merge.bin	2 months ago
Willem Oldemans	e1616ff29d	Remove static BLE_PIN_CODE definition from Heltec E290_usb configuration	2 months ago
Willem Oldemans	973321d9b1	Disable BLE_PIN_CODE for E290 companion USB environment Remove the hardcoded BLE_PIN_CODE build flag from the Heltec_E290_companion_ble environment. The presence of BLE_PIN_CODE prevents the unit from operating as a USB companion. Commenting it out allows dynamic PIN generation and enables USB companion functionality.	2 months ago
Rastislav Vysoky	68363d9e4d	revert: "feat: Enable GPS on RAK 1W kit" (#2401 ) reverted changes to RAK_BOARD and PIN_GPS_EN. setting `RAK_BOARD` would cause radio to stop working and end with RadioLib error -707	2 months ago

1 2 3 4 5 ...

1136 Commits (config-serializer)