mirror of https://github.com/meshcore-dev/MeshCore
taco
4 weeks ago
7 changed files with 512 additions and 0 deletions
@ -0,0 +1,85 @@ |
|||
#include <Arduino.h> |
|||
#include <Wire.h> |
|||
|
|||
|
|||
#include "TechoCardBoard.h" |
|||
|
|||
#ifdef LILYGO_TECHO_CARD |
|||
|
|||
Adafruit_NeoPixel Led_A(1, WS2812_DATA_2, NEO_GRB + NEO_KHZ800); |
|||
Adafruit_NeoPixel Led_B(1, WS2812_DATA_3, NEO_GRB + NEO_KHZ800); |
|||
Adafruit_NeoPixel Led_C(1, WS2812_DATA_1, NEO_GRB + NEO_KHZ800); |
|||
|
|||
Adafruit_NeoPixel *Led[] = |
|||
{ |
|||
&Led_A, |
|||
&Led_B, |
|||
&Led_C, |
|||
}; |
|||
|
|||
|
|||
void TechoCardBoard::begin() { |
|||
NRF52BoardDCDC::begin(); |
|||
Wire.begin(); |
|||
|
|||
for (uint8_t i = 0; i < sizeof(Led) / sizeof(*Led); i++) |
|||
{ |
|||
Led[i]->begin(); |
|||
delay(3); // allow the LEDs to initialise, otherwise they can get stuck
|
|||
Led[i]->setPixelColor(0, Led[i]->Color(0, 0, 0)); |
|||
Led[i]->show(); |
|||
} |
|||
|
|||
// put IMU20948 to sleep
|
|||
// see https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000189-icm-20948-v1.5.pdf
|
|||
Wire.beginTransmission(0x68); |
|||
Wire.write(0x06); // PWR_MGMT_1 register
|
|||
Wire.write(0x40); // set SLEEP bit
|
|||
Wire.endTransmission(); |
|||
|
|||
} |
|||
|
|||
uint16_t TechoCardBoard::getBattMilliVolts() { |
|||
int adcvalue = 0; |
|||
|
|||
analogReference(AR_INTERNAL_3_0); |
|||
analogReadResolution(12); |
|||
|
|||
digitalWrite(PIN_BAT_CTL, HIGH); // enable vbat vdiv
|
|||
delay(10); |
|||
|
|||
// ADC range is 0..3000mV and resolution is 12-bit (0..4095)
|
|||
adcvalue = analogRead(PIN_VBAT_READ); |
|||
digitalWrite(PIN_BAT_CTL, LOW); |
|||
|
|||
// Convert the raw value to compensated mv, taking the resistor-
|
|||
// divider into account (providing the actual LIPO voltage)
|
|||
return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB); |
|||
} |
|||
|
|||
void TechoCardBoard::onBeforeTransmit() { |
|||
Led_A.setPixelColor(0, 20, 20, 20); // turn TX LED on
|
|||
Led_A.show(); |
|||
} |
|||
|
|||
void TechoCardBoard::onAfterTransmit() { |
|||
Led_A.setPixelColor(0, 0, 0, 0); // turn TX LED off
|
|||
Led_A.show(); |
|||
} |
|||
|
|||
void TechoCardBoard::turnOffLeds() { |
|||
for (uint8_t i = 0; i < sizeof(Led) / sizeof(*Led); i++) |
|||
{ |
|||
Led[i]->setPixelColor(0, 0, 0, 0); |
|||
Led[i]->show(); |
|||
} |
|||
} |
|||
|
|||
void TechoCardBoard::powerOff() { |
|||
nrf_gpio_cfg_sense_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);\ |
|||
turnOffLeds(); |
|||
digitalWrite(PIN_PWR_EN, LOW); |
|||
sd_power_system_off(); |
|||
} |
|||
|
|||
#endif |
|||
@ -0,0 +1,34 @@ |
|||
#pragma once |
|||
|
|||
#include <MeshCore.h> |
|||
#include <Arduino.h> |
|||
#include <helpers/NRF52Board.h> |
|||
#include <Adafruit_Neopixel.h> |
|||
|
|||
// built-ins
|
|||
#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
|||
|
|||
#define VBAT_DIVIDER (0.5F) // Even voltage divider on VBAT
|
|||
#define VBAT_DIVIDER_COMP (2.0F) // Compensation factor for the VBAT divider
|
|||
|
|||
#define PIN_VBAT_READ (2) |
|||
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB) |
|||
|
|||
class TechoCardBoard : public NRF52BoardDCDC { |
|||
public: |
|||
TechoCardBoard() : NRF52Board("TECHO_OTA") {} |
|||
void begin(); |
|||
uint16_t getBattMilliVolts() override; |
|||
void onBeforeTransmit(void) override; |
|||
void onAfterTransmit(void) override; |
|||
|
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "LilyGo T-Echo Card"; |
|||
} |
|||
|
|||
void powerOff() override; |
|||
|
|||
void turnOffLeds(); |
|||
|
|||
}; |
|||
@ -0,0 +1,118 @@ |
|||
[LilyGo_T-Echo_Card] |
|||
extends = nrf52_base |
|||
board = t-echo |
|||
board_build.ldscript = boards/nrf52840_s140_v6.ld |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I variants/lilygo_techo_card |
|||
-I src/helpers/nrf52 |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 |
|||
-D LILYGO_TECHO_CARD |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=140 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
-D HAS_NEOPIXEL=1 |
|||
; -D DISABLE_DIAGNOSTIC_OUTPUT |
|||
-D ENV_INCLUDE_GPS=1 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D PIN_OLED_RESET=-1 |
|||
build_src_filter = ${nrf52_base.build_src_filter} |
|||
+<helpers/*.cpp> |
|||
+<TechoCardBoard.cpp> |
|||
+<helpers/sensors/EnvironmentSensorManager.cpp> |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<../variants/lilygo_techo_card> |
|||
lib_deps = |
|||
${nrf52_base.lib_deps} |
|||
stevemarple/MicroNMEA @ ^2.0.6 |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
adafruit/Adafruit NeoPixel@^1.10.0 |
|||
bakercp/CRC32 @ ^2.0.0 |
|||
debug_tool = jlink |
|||
upload_protocol = nrfutil |
|||
|
|||
[env:LilyGo_T-Echo_Card_repeater] |
|||
extends = LilyGo_T-Echo_Card |
|||
build_src_filter = ${LilyGo_T-Echo_Card.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
build_flags = |
|||
${LilyGo_T-Echo_Card.build_flags} |
|||
-D ADVERT_NAME='"T-Echo Card Repeater"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MAX_NEIGHBOURS=50 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:LilyGo_T-Echo_Card_room_server] |
|||
extends = LilyGo_T-Echo_Card |
|||
build_src_filter = ${LilyGo_T-Echo_Card.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
build_flags = |
|||
${LilyGo_T-Echo_Card.build_flags} |
|||
-D ADVERT_NAME='"T-Echo Card Room"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:LilyGo_T-Echo_Card_companion_radio_ble] |
|||
extends = LilyGo_T-Echo_Card |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 712704 |
|||
build_flags = |
|||
${LilyGo_T-Echo_Card.build_flags} |
|||
-I src/helpers/ui |
|||
-I examples/companion_radio/ui-new |
|||
-D PIN_BUZZER=38 |
|||
-D QSPIFLASH=1 |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
-D BLE_PIN_CODE=123456 |
|||
; -D BLE_DEBUG_LOGGING=1 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
-D UI_RECENT_LIST_SIZE=3 |
|||
-D UI_GPS_PAGE=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
-D AUTO_SHUTDOWN_MILLIVOLTS=3300 |
|||
build_src_filter = ${LilyGo_T-Echo_Card.build_src_filter} |
|||
+<helpers/nrf52/SerialBLEInterface.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-new/*.cpp> |
|||
+<helpers/ui/buzzer.cpp> |
|||
lib_deps = |
|||
${LilyGo_T-Echo_Card.lib_deps} |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_T-Echo_Card_companion_radio_usb] |
|||
extends = LilyGo_T-Echo_Card |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 712704 |
|||
build_flags = |
|||
${LilyGo_T-Echo_Card.build_flags} |
|||
-I src/helpers/ui |
|||
-I examples/companion_radio/ui-new |
|||
-D PIN_BUZZER=38 |
|||
-D QSPIFLASH=1 |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
-D UI_RECENT_LIST_SIZE=3 |
|||
-D UI_GPS_PAGE=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
-D AUTO_SHUTDOWN_MILLIVOLTS=3300 |
|||
build_src_filter = ${LilyGo_T-Echo_Card.build_src_filter} |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-new/*.cpp> |
|||
lib_deps = |
|||
${LilyGo_T-Echo_Card.lib_deps} |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,54 @@ |
|||
#include <Arduino.h> |
|||
#include "target.h" |
|||
#include <helpers/ArduinoHelpers.h> |
|||
#include <helpers/sensors/MicroNMEALocationProvider.h> |
|||
|
|||
TechoCardBoard board; |
|||
|
|||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
|||
|
|||
WRAPPER_CLASS radio_driver(radio, board); |
|||
|
|||
VolatileRTCClock fallback_clock; |
|||
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
|||
|
|||
#ifdef ENV_INCLUDE_GPS |
|||
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); |
|||
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
|||
#else |
|||
EnvironmentSensorManager sensors = EnvironmentSensorManager(); |
|||
#endif |
|||
|
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
DISPLAY_CLASS display; |
|||
MomentaryButton user_btn(PIN_USER_BTN, 1000, true); |
|||
#endif |
|||
|
|||
bool radio_init() { |
|||
rtc_clock.begin(Wire); |
|||
|
|||
return radio.std_init(&SPI); |
|||
} |
|||
|
|||
uint32_t radio_get_rng_seed() { |
|||
return radio.random(0x7FFFFFFF); |
|||
} |
|||
|
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { |
|||
radio.setFrequency(freq); |
|||
radio.setSpreadingFactor(sf); |
|||
radio.setBandwidth(bw); |
|||
radio.setCodingRate(cr); |
|||
} |
|||
|
|||
void radio_set_tx_power(int8_t dbm) { |
|||
radio.setOutputPower(dbm); |
|||
} |
|||
|
|||
mesh::LocalIdentity radio_new_identity() { |
|||
RadioNoiseListener rng(radio); |
|||
return mesh::LocalIdentity(&rng); // create new random identity
|
|||
} |
|||
|
|||
|
|||
@ -0,0 +1,32 @@ |
|||
#pragma once |
|||
|
|||
#define RADIOLIB_STATIC_ONLY 1 |
|||
#include <RadioLib.h> |
|||
#include <helpers/radiolib/RadioLibWrappers.h> |
|||
#include <TechoCardBoard.h> |
|||
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
|||
#include <helpers/AutoDiscoverRTCClock.h> |
|||
#include <helpers/SensorManager.h> |
|||
#include <helpers/sensors/EnvironmentSensorManager.h> |
|||
#include <helpers/sensors/LocationProvider.h> |
|||
#ifdef DISPLAY_CLASS |
|||
#include <helpers/ui/SSD1306Display.h> |
|||
#include <helpers/ui/MomentaryButton.h> |
|||
#endif |
|||
|
|||
extern TechoCardBoard board; |
|||
extern WRAPPER_CLASS radio_driver; |
|||
extern AutoDiscoverRTCClock rtc_clock; |
|||
extern EnvironmentSensorManager sensors; |
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
extern DISPLAY_CLASS display; |
|||
extern MomentaryButton user_btn; |
|||
#endif |
|||
|
|||
bool radio_init(); |
|||
uint32_t radio_get_rng_seed(); |
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); |
|||
void radio_set_tx_power(int8_t dbm); |
|||
mesh::LocalIdentity radio_new_identity(); |
|||
|
|||
@ -0,0 +1,45 @@ |
|||
#include "variant.h" |
|||
#include "wiring_constants.h" |
|||
#include "wiring_digital.h" |
|||
#include "Adafruit_NeoPixel.h" |
|||
|
|||
const int MISO = PIN_SPI_MISO; |
|||
const int MOSI = PIN_SPI_MOSI; |
|||
const int SCK = PIN_SPI_SCK; |
|||
|
|||
|
|||
|
|||
const uint32_t g_ADigitalPinMap[] = { |
|||
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, |
|||
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, |
|||
27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, |
|||
40, 41, 42, 43, 44, 45, 46, 47 |
|||
}; |
|||
|
|||
void initVariant() { |
|||
// turn on 3v3 rail
|
|||
pinMode(PIN_PWR_EN, OUTPUT); |
|||
digitalWrite(PIN_PWR_EN, HIGH); |
|||
|
|||
// VDIV enable
|
|||
pinMode(PIN_BAT_CTL, OUTPUT); |
|||
|
|||
// buttons
|
|||
pinMode(PIN_BUTTON1, INPUT_PULLUP); |
|||
pinMode(PIN_BUTTON2, INPUT_PULLUP); |
|||
|
|||
// speaker
|
|||
pinMode(SPEAKER_EN, OUTPUT); |
|||
digitalWrite(SPEAKER_EN, LOW); |
|||
pinMode(SPEAKER_EN_2, OUTPUT); |
|||
digitalWrite(SPEAKER_EN_2, LOW); |
|||
|
|||
// gps
|
|||
pinMode(PIN_GPS_STANDBY, OUTPUT); |
|||
digitalWrite(PIN_GPS_STANDBY, HIGH); |
|||
pinMode(PIN_GPS_EN, OUTPUT); |
|||
digitalWrite(PIN_GPS_EN, HIGH); |
|||
pinMode(PIN_GPS_RESET, OUTPUT); |
|||
digitalWrite(PIN_GPS_RESET, HIGH); |
|||
|
|||
} |
|||
@ -0,0 +1,144 @@ |
|||
/*
|
|||
* variant.h |
|||
* |
|||
* MIT License |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#include "WVariant.h" |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Low frequency clock source
|
|||
|
|||
#define USE_LFXO // 32.768 kHz crystal oscillator
|
|||
#define VARIANT_MCK (64000000ul) |
|||
|
|||
#define WIRE_INTERFACES_COUNT (1) |
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Power
|
|||
|
|||
#define PIN_PWR_EN (30) // RT9080 LDO enable pin for 3v3 rail
|
|||
|
|||
#define PIN_BAT_CTL (31) // vdiv enable
|
|||
#define PIN_VBAT_READ (2) |
|||
#define ADC_MULTIPLIER (4.90F) |
|||
|
|||
#define ADC_RESOLUTION (14) |
|||
#define BATTERY_SENSE_RES (12) |
|||
#define AREF_VOLTAGE (3.0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Number of pins
|
|||
|
|||
#define PINS_COUNT (48) |
|||
#define NUM_DIGITAL_PINS (48) |
|||
#define NUM_ANALOG_INPUTS (1) |
|||
#define NUM_ANALOG_OUTPUTS (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// UART pin definition
|
|||
|
|||
#define PIN_SERIAL1_RX PIN_GPS_TX |
|||
#define PIN_SERIAL1_TX PIN_GPS_RX |
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// I2C pin definition
|
|||
|
|||
#define PIN_WIRE_SDA (36) // P1.04
|
|||
#define PIN_WIRE_SCL (34) // P1.02
|
|||
#define I2C_NO_RESCAN |
|||
#define DISABLE_DS3231_PROBE // DS3231 lives at 0x68 but this board has ICM20948 at that address, causing broken clock.
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI pin definition
|
|||
|
|||
#define SPI_INTERFACES_COUNT (1) |
|||
|
|||
#define PIN_SPI_MISO (17) |
|||
#define PIN_SPI_MOSI (15) |
|||
#define PIN_SPI_SCK (13) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// QSPI FLASH
|
|||
|
|||
#define PIN_QSPI_SCK (4) |
|||
#define PIN_QSPI_CS (12) |
|||
#define PIN_QSPI_IO0 (6) |
|||
#define PIN_QSPI_IO1 (8) |
|||
#define PIN_QSPI_IO2 (41) // P1.09
|
|||
#define PIN_QSPI_IO3 (26) |
|||
|
|||
#define EXTERNAL_FLASH_DEVICES ZD25WQ32CEIGR |
|||
#define EXTERNAL_FLASH_USE_QSPI |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin LEDs (only WS2812, no traditional LEDs available)
|
|||
|
|||
// WS1812 data lines
|
|||
#define WS2812_DATA_1 (39) // P1.07
|
|||
#define WS2812_DATA_2 (44) // P1.12
|
|||
#define WS2812_DATA_3 (28) // P0.28
|
|||
|
|||
#define LED_BLUE (-1) |
|||
#define LED_BUILTIN (-1) |
|||
#define LED_PIN LED_BUILTIN |
|||
#define LED_STATE_ON LOW |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin buttons
|
|||
|
|||
#define PIN_BUTTON1 (42) // P1.10
|
|||
#define BUTTON_PIN PIN_BUTTON1 // BUTTON A
|
|||
#define PIN_USER_BTN BUTTON_PIN |
|||
|
|||
#define PIN_BUTTON2 (24) |
|||
#define BUTTON_PIN2 PIN_BUTTON2 // BUTTON C
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Lora (Acsip S62F)
|
|||
|
|||
#define USE_SX1262 |
|||
#define P_LORA_SCLK PIN_SPI_SCK |
|||
#define P_LORA_MISO PIN_SPI_MISO |
|||
#define P_LORA_MOSI PIN_SPI_MOSI |
|||
#define P_LORA_DIO_1 (40) // P1.08
|
|||
#define P_LORA_RESET (7) // P0.07
|
|||
#define P_LORA_BUSY (14) // P0.14
|
|||
#define P_LORA_NSS (11) // P0.11
|
|||
#define SX126X_RXEN (33) // P1.01
|
|||
#define SX126X_TXEN (27) // P0.27
|
|||
#define SX126X_DIO3_TCXO_VOLTAGE (1.8f) |
|||
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// GPS
|
|||
|
|||
// NOTE: these pins are defined differently to how lilygo does them but they
|
|||
// seem to work properly for how EnvironmentSensorManager operates.
|
|||
// TODO: MAYBE? migrate to board based sensor manager / add GPS_WAKE_UP to ESM
|
|||
|
|||
#define PIN_GPS_RX (21) // GPS_UART_RX in lilygo pin defs
|
|||
#define PIN_GPS_TX (19) // GPS_UART_TX in lilygo pin defs
|
|||
#define PIN_GPS_EN (25) // GPS_WAKE_UP in lilygo pin defs
|
|||
#define PIN_GPS_RESET (47) // GPS_EN in lilygo pin defs
|
|||
#define PIN_GPS_STANDBY (29) // GPS_RF_EN in lilygo pin defs
|
|||
#define PIN_GPS_PPS (23) // GPS_1PPS in lilygo pin defs
|
|||
|
|||
// buzzer - enabled in platformio.ini so it can be easily turned off if not wanted.
|
|||
// #define PIN_BUZZER (38) // P1.06
|
|||
|
|||
// microphone
|
|||
#define MICROPHONE_SCLK (35) // P1.03
|
|||
#define MICROPHONE_DATA (37) // P1.05
|
|||
|
|||
// speaker
|
|||
#define SPEAKER_EN (43) // P1.11
|
|||
#define SPEAKER_EN_2 (3) // P0.03
|
|||
#define SPEAKER_BCLK (16) // P0.16
|
|||
#define SPEAKER_DATA (20) // P0.20
|
|||
#define SPEAKER_WS_LRCK (22) // P0.22
|
|||
|
|||
// ICM20948 9dof motion sensor (accelerometer and magnetometer)
|
|||
#define ICM20948_SDA PIN_WIRE_SDA // P1.4
|
|||
#define ICM20948_SCL PIN_WIRE_SCL // P1.2
|
|||
#define ICM20948_ADDRESS 0x68 |
|||
Loading…
Reference in new issue