Remove NRF52BoardOTA class and integrate it into NRF52Board

As all NRF52 boards now have OTA support, let's remove the subclass
and integrate it into the base class.

Signed-off-by: Frieder Schrempf <[email protected]>

src/helpers/NRF52Board.cpp

@@ -54,7 +54,7 @@ float NRF52Board::getMCUTemperature() {
   return temp * 0.25f; // Convert to *C
 }
 
-bool NRF52BoardOTA::startOTAUpdate(const char *id, char reply[]) {
+bool NRF52Board::startOTAUpdate(const char *id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()

src/helpers/NRF52Board.h

@@ -8,12 +8,15 @@
 class NRF52Board : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
+  char *ota_name;
 
 public:
+  NRF52Board(char *otaname) : ota_name(otaname) {}
   virtual void begin();
   virtual uint8_t getStartupReason() const override { return startup_reason; }
   virtual float getMCUTemperature() override;
   virtual void reboot() override { NVIC_SystemReset(); }
+  virtual bool startOTAUpdate(const char *id, char reply[]) override;
 };
 
 /*
@@ -25,15 +28,7 @@ public:
  */
 class NRF52BoardDCDC : virtual public NRF52Board {
 public:
+  NRF52BoardDCDC() {}
   virtual void begin() override;
 };
-
-class NRF52BoardOTA : virtual public NRF52Board {
-private:
-  char *ota_name;
-
-public:
-  NRF52BoardOTA(char *name) : ota_name(name) {}
-  virtual bool startOTAUpdate(const char *id, char reply[]) override;
-};
 #endif

variants/heltec_mesh_solar/MeshSolarBoard.h

@@ -20,9 +20,9 @@
 #define SX126X_DIO2_AS_RF_SWITCH  true
 #define SX126X_DIO3_TCXO_VOLTAGE   1.8
 
-class MeshSolarBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class MeshSolarBoard : public NRF52BoardDCDC {
 public:
-  MeshSolarBoard() : NRF52BoardOTA("MESH_SOLAR_OTA") {}
+  MeshSolarBoard() : NRF52Board("MESH_SOLAR_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {

variants/heltec_t114/T114Board.h

@@ -9,9 +9,9 @@
 #define  PIN_BAT_CTL      6
 #define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
 
-class T114Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class T114Board : public NRF52BoardDCDC {
 public:
-    T114Board() : NRF52BoardOTA("T114_OTA") {}
+  T114Board() : NRF52Board("T114_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/ikoka_handheld_nrf/IkokaNrf52Board.h

@@ -6,9 +6,9 @@
 
 #ifdef IKOKA_NRF52
 
-class IkokaNrf52Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class IkokaNrf52Board : public NRF52BoardDCDC {
 public:
-  IkokaNrf52Board() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaNrf52Board() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/ikoka_nano_nrf/IkokaNanoNRFBoard.h

@@ -6,9 +6,9 @@
 
 #ifdef XIAO_NRF52
 
-class IkokaNanoNRFBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class IkokaNanoNRFBoard : public NRF52BoardDCDC {
 public:
-  IkokaNanoNRFBoard() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaNanoNRFBoard() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/ikoka_stick_nrf/IkokaStickNRFBoard.h

@@ -6,9 +6,9 @@
 
 #ifdef XIAO_NRF52
 
-class IkokaStickNRFBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class IkokaStickNRFBoard : public NRF52BoardDCDC {
 public:
-  IkokaStickNRFBoard() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaStickNRFBoard() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/keepteen_lt1/KeepteenLT1Board.h

@@ -4,12 +4,12 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class KeepteenLT1Board : public NRF52BoardOTA {
+class KeepteenLT1Board : public NRF52Board {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  KeepteenLT1Board() : NRF52BoardOTA("KeepteenLT1_OTA") {}
+  KeepteenLT1Board() : NRF52Board("KeepteenLT1_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8

variants/lilygo_techo/TechoBoard.h

@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class TechoBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class TechoBoard : public NRF52BoardDCDC {
 public:
-  TechoBoard() : NRF52BoardOTA("TECHO_OTA") {}
+  TechoBoard() : NRF52Board("TECHO_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 

variants/lilygo_techo_lite/TechoBoard.h

@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class TechoBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class TechoBoard : public NRF52BoardDCDC {
 public:
-  TechoBoard() : NRF52BoardOTA("TECHO_OTA") {}
+  TechoBoard() : NRF52Board("TECHO_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 

variants/mesh_pocket/MeshPocket.h

@@ -9,9 +9,9 @@
 #define  PIN_BAT_CTL      34
 #define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
 
-class HeltecMeshPocket : public NRF52BoardDCDC, public NRF52BoardOTA {
+class HeltecMeshPocket : public NRF52BoardDCDC {
 public:
-  HeltecMeshPocket() : NRF52BoardOTA("MESH_POCKET_OTA") {}
+  HeltecMeshPocket() : NRF52Board("MESH_POCKET_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {

variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h

@@ -20,12 +20,12 @@
 #define  PIN_VBAT_READ BATTERY_PIN
 #define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
 
-class MinewsemiME25LS01Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class MinewsemiME25LS01Board : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  MinewsemiME25LS01Board() : NRF52BoardOTA("Minewsemi_OTA") {}
+  MinewsemiME25LS01Board() : NRF52Board("Minewsemi_OTA") {}
   void begin();
 
 #define BATTERY_SAMPLES 8

variants/nano_g2_ultra/nano-g2.h

@@ -35,9 +35,9 @@
 #define PIN_VBAT_READ            (0 + 2)
 #define REAL_VBAT_MV_PER_LSB     (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class NanoG2Ultra : public NRF52BoardOTA {
+class NanoG2Ultra : public NRF52Board {
 public:
-  NanoG2Ultra() : NRF52BoardOTA("NANO_G2_OTA") {}
+  NanoG2Ultra() : NRF52Board("NANO_G2_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 

variants/promicro/PromicroBoard.h

@@ -20,13 +20,13 @@
 #define  PIN_VBAT_READ 17
 #define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
 
-class PromicroBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class PromicroBoard : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
   float adc_mult = ADC_MULTIPLIER;
 
 public:
-  PromicroBoard() : NRF52BoardOTA("ProMicro_OTA") {}
+  PromicroBoard() : NRF52Board("ProMicro_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8

variants/rak4631/RAK4631Board.h

@@ -29,9 +29,9 @@
 #define  PIN_VBAT_READ    5
 #define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
 
-class RAK4631Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class RAK4631Board : public NRF52BoardDCDC {
 public:
-  RAK4631Board() : NRF52BoardOTA("RAK4631_OTA") {}
+  RAK4631Board() : NRF52Board("RAK4631_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8

variants/rak_wismesh_tag/RAKWismeshTagBoard.h

@@ -8,9 +8,9 @@
 #define  PIN_VBAT_READ    5
 #define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
 
-class RAKWismeshTagBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class RAKWismeshTagBoard : public NRF52BoardDCDC {
 public:
-  RAKWismeshTagBoard() : NRF52BoardOTA("WISMESHTAG_OTA") {}
+  RAKWismeshTagBoard() : NRF52Board("WISMESHTAG_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED) && defined(LED_STATE_ON)

variants/sensecap_solar/SenseCapSolarBoard.h

@@ -4,9 +4,9 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class SenseCapSolarBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class SenseCapSolarBoard : public NRF52BoardDCDC {
 public:
-  SenseCapSolarBoard() : NRF52BoardOTA("SENSECAP_SOLAR_OTA") {}
+  SenseCapSolarBoard() : NRF52Board("SENSECAP_SOLAR_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/t1000-e/T1000eBoard.h

@@ -4,12 +4,12 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class T1000eBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class T1000eBoard : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  T1000eBoard() : NRF52BoardOTA("T1000E_OTA") {}
+  T1000eBoard() : NRF52Board("T1000E_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {

variants/thinknode_m1/ThinkNodeM1Board.h

@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class ThinkNodeM1Board : public NRF52BoardOTA {
+class ThinkNodeM1Board : public NRF52Board {
 public:
-  ThinkNodeM1Board() : NRF52BoardOTA("THINKNODE_M1_OTA") {}
+  ThinkNodeM1Board() : NRF52Board("THINKNODE_M1_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 

variants/wio-tracker-l1/WioTrackerL1Board.h

@@ -4,12 +4,12 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class WioTrackerL1Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class WioTrackerL1Board : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  WioTrackerL1Board() : NRF52BoardOTA("WioTrackerL1 OTA") {}
+  WioTrackerL1Board() : NRF52Board("WioTrackerL1 OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)

variants/wio_wm1110/WioWM1110Board.h

@@ -11,9 +11,9 @@
 #endif
 #define Serial Serial1
 
-class WioWM1110Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class WioWM1110Board : public NRF52BoardDCDC {
 public:
-  WioWM1110Board() : NRF52BoardOTA("WM1110_OTA") {}
+  WioWM1110Board() : NRF52Board("WM1110_OTA") {}
   void begin();
 
 #if defined(LED_GREEN)

variants/xiao_nrf52/XiaoNrf52Board.h

@@ -6,9 +6,9 @@
 
 #ifdef XIAO_NRF52
 
-class XiaoNrf52Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class XiaoNrf52Board : public NRF52BoardDCDC {
 public:
-  XiaoNrf52Board() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  XiaoNrf52Board() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)