ipv6 support

config

@@ -16,15 +16,21 @@ TPWS_OPT_HTTP="--hostspell=HOST --split-http-req=method"
 TPWS_OPT_HTTPS="--split-pos=3"
 
 # for routers based on desktop linux only. has not effect in openwrt.
-# CHOSE NETWORK INTERFACE BEHIND NAT (LAN)
-# or leave it commented if its not router
-#SLAVE_ETH=eth0
+# CHOOSE LAN and WAN NETWORK INTERFACES
+# or leave them commented if its not router
+#IFACE_LAN=eth0
+#IFACE_WAN=eth1
 
 # should init scripts apply firewall rules ?
 # set to 0 if firewall control system is present
 # openwrt uses fw3 firewall , init never touch fw
 INIT_APPLY_FW=1
 
+# do not work with ipv4
+#DISABLE_IPV4=1
+# do not work with ipv6
+DISABLE_IPV6=1
+
 # select which init script will be used to get ip or host list
 # possible values : get_user.sh get_antizapret.sh get_combined.sh get_reestr.sh get_hostlist.sh
 # comment if not required

docs/changes.txt

@@ -128,3 +128,8 @@ v25
 
 init : move to native systemd units
 use links to units, init scripts and firewall includes, no more copying
+
+v26
+
+ipv6 support
+tpws : advanced bind options

docs/readme.txt

@@ -91,6 +91,20 @@ transparent proxy (TPROXY или DNAT). TPROXY не работает с соед
 iptables -t nat -I PREROUTING -p tcp --dport 80 -j DNAT --to 127.0.0.1:1188
 iptables -t nat -I OUTPUT -p tcp --dport 80 -m owner ! --uid-owner tpws -j DNAT --to 127.0.0.1:1188
 
+Особенности применения ip6tables
+--------------------------------
+
+ip6tables работают почти точно так же, как и ipv4, но есть ряд важных нюансов.
+В DNAT следует брать адрес --to в квадратные скобки. Например :
+
+ iptables -t nat -I OUTPUT -p tcp --dport 80 -m owner ! --uid-owner tpws -j DNAT --to [::1]:1188
+ 
+Параметра route_localnet не существует для ipv6.
+DNAT на localhost (::1) возможен только в цепочке OUTPUT.
+В цепочке PREROUTING DNAT возможен на любой global address или на link local address того же интерфейса,
+откуда пришел пакет.
+NFQUEUE работает без изменений.
+
 nfqws
 -----
 
@@ -113,6 +127,11 @@ tpws - это transparent proxy.
  --pidfile=<file>	; сохранить PID в файл
  --user=<username>	; менять uid процесса
  --bind-addr		; на каком адресе слушать. может быть ipv4 или ipv6 адрес. если не указано, то слушает на всех адресах ipv4 и ipv6
+ 			; если указан ipv6 link local, то требуется указать с какого он интерфейса через --bind-iface6
+ --bind-linklocal=prefer|force	; если prefer, то найти link local от iface6. если не найдено - использовать первый адрес любого типа.
+ 				; если force и link local не найден - выход по ошибке.
+ --bind-iface4=<iface>	; слушать на первом ipv4 интерфейса iface
+ --bind-iface6=<iface>	; слушать на первом ipv6 интерфейса iface. при bind-linklocal определяет интерфейс, откуда брать ipv6 link local
  --port=<port>		; на каком порту слушать
  --split-http-req=method|host	; способ разделения http запросов на сегменты : около метода (GET,POST) или около заголовка Host
  --split-pos=<offset>	; делить все посылы на сегменты в указанной позиции. Если отсыл длинее 8Kb (размер буфера приема), то будет разделен каждый блок по 8Kb.
@@ -131,6 +150,8 @@ tpws - это transparent proxy.
 			; список может быть запакован в gzip. формат автоматически распознается и разжимается
 Параметры манипуляции могут сочетаться в любых комбинациях.
 Есть исключения : split-pos заменяет split-http-req. hostdot и hosttab взаимоисключающи.
+tpws может биндаться только к одному ip или ко всем сразу.
+Для бинда на все ipv4 укажите "0.0.0.0", на все ipv6 - "::". Без параметров биндаемся на все ipv4 и ipv6.
 
 Способы получения списка заблокированных IP
 -------------------------------------------
@@ -184,6 +205,12 @@ get_reestr.sh может использовать мультипоточный
 в отдельный ipset "ipban". Он может использоваться для принудительного завертывания всех
 соединений на прозрачный proxy "redsocks" или на VPN.
 
+IPV6 : если включен ipv6, то дополнительно создаются листы с таким же именем, но с "6" на конце перед расширением.
+zapret-ip.txt => zapret-ip6.txt
+Создаются ipset-ы zapret6 и ipban6.
+Реестр РКН не содержит список ipv6 адресов. Возможен только самостоятельный ресолвинг юзер листа или
+листа доменов РКН.  get_user.sh и get_reestr.sh создают списки ipv6.
+
 Фильтрация по именам доменов
 ----------------------------
 
@@ -251,11 +278,17 @@ TPWS_OPT_HTTPS="--split-pos=3"
 Поместите сюда название скрипта, который будете использовать для обновления листов.
 Если не нужно, то параметр следует закомментировать.
 
+Можно индивидуально отключить ipv4 или ipv6. Если параметр закомментирован или не равен "1",
+использование протокола разрешено.
+#DISABLE_IPV4=1
+DISABLE_IPV6=1
+
 
 Следующие настройки не актуальны для openwrt :
 
-Если ваша система работает как роутер, то нужно раскомментировать параметр SLAVE_ETH и вписать в него
-название внутреннего сетевого интерфейса (LAN).
+Если ваша система работает как роутер, то нужно вписать названия внутреннего и внешнего интерфейсов :
+IFACE_LAN=eth0
+IFACE_WAN=eth1
 
 Параметр INIT_APPLY_FW=1 разрешает init скрипту самостоятельно применять правила iptables.
 При иных значениях или если параметр закомментирован, правила применены не будут.
@@ -288,7 +321,7 @@ TPWS_OPT_HTTPS="--split-pos=3"
  ln -fs /opt/zapret/init.d/systemd/zapret.service /lib/systemd/system
 
 Удалить старые листы, если они были созданы ранее :
- rm /opt/zapret/ipset/zapret-ip.txt* /opt/zapret/ipset/zapret-ip-user.txt* /opt/zapret/ipset/zapret-ip-ipban.txt* /opt/zapret/ipset/zapret-ip-user-ipban.txt* /opt/zapret/ipset/zapret-hosts.txt*
+ /opt/zapret/ipset/clear_lists.sh
 По желанию прописать в /opt/zapret/ipset/zapret-hosts-user.txt свои домены.
 Выполнить скрипт обновления листа :
  /opt/zapret/ipset/get_config.sh
@@ -387,7 +420,7 @@ git и curl по умолчанию могут присутствовать, ips
 АЛЬТЕРНАТИВА : зайти в tpws,nfq,ip2net,mdig, в каждом выполнить make. Получите динамические бинарики под вашу ось.
 
 Удалить старые листы, если они были созданы ранее :
- rm /opt/zapret/ipset/zapret-ip.txt* /opt/zapret/ipset/zapret-ip-user.txt* /opt/zapret/ipset/zapret-ip-ipban.txt* /opt/zapret/ipset/zapret-ip-user-ipban.txt* /opt/zapret/ipset/zapret-hosts.txt*
+ /opt/zapret/ipset/clear_lists.sh
 По желанию прописать в /opt/zapret/ipset/zapret-hosts-user.txt свои домены.
 Выполнить скрипт обновления листа :
  /opt/zapret/ipset/get_config.sh
@@ -530,7 +563,7 @@ ipset можно выкинуть, если не будем пользовать
 Настроить параметры согласно разделу "Выбор параметров".
 
 Удалить старые листы, если они были созданы ранее :
- rm /opt/zapret/ipset/zapret-ip.txt* /opt/zapret/ipset/zapret-ip-user.txt* /opt/zapret/ipset/zapret-ip-ipban.txt* /opt/zapret/ipset/zapret-ip-user-ipban.txt* /opt/zapret/ipset/zapret-hosts.txt*
+ /opt/zapret/ipset/clear_lists.sh
 По желанию прописать в /opt/zapret/ipset/zapret-hosts-user.txt свои домены.
 Выполнить скрипт обновления листа :
  /opt/zapret/ipset/get_config.sh
@@ -542,19 +575,37 @@ ipset можно выкинуть, если не будем пользовать
  /etc/init.d/zapret enable
  /etc/init.d/zapret start
 
-В зависимости от выбранного в файле config MODE скопировать нужный файл настроек фаервола :
- cp /opt/zapret/init.d/openwrt/firewall.zapret.$MODE /etc/firewall.zapret
+Если не включен параметр DISABLE_IPV4 :
+В зависимости от выбранного в файле config MODE создать ссылку на нужный файл настроек фаервола :
+ ln -fs /opt/zapret/init.d/openwrt/firewall.zapret.$MODE /etc/firewall.zapret
 Например :
- cp /opt/zapret/init.d/openwrt/firewall.zapret.tpws_ipset_https /etc/firewall.zapret
+ ln -fs /opt/zapret/init.d/openwrt/firewall.zapret.tpws_ipset_https /etc/firewall.zapret
 Проверить была ли создана ранее запись о firewall include :
  uci show firewall | grep firewall.zapret
-Если ничего не вывело, значит добавить :
+Если firewall.zapret нет, значит добавить :
  uci add firewall include
  uci set firewall.@include[-1].path="/etc/firewall.zapret"
  uci set firewall.@include[-1].reload="1"
  uci commit firewall
 Перезапустить фаервол :
  fw3 restart
+
+Если не включен параметр DISABLE_IPV6 :
+В зависимости от выбранного в файле config MODE создать ссылку на нужный файл настроек фаервола :
+ ln -fs /opt/zapret/init.d/openwrt/firewall.zapret.${MODE}6 /etc/firewall.zapret6
+Например :
+ ln -fs /opt/zapret/init.d/openwrt/firewall.zapret.tpws_ipset_https6 /etc/firewall.zapret6
+Проверить была ли создана ранее запись о firewall include :
+ uci show firewall | grep firewall.zapret6
+Если firewall.zapret6 нет, значит добавить :
+ uci add firewall include
+ uci set firewall.@include[-1].path="/etc/firewall.zapret6"
+ uci set firewall.@include[-1].reload="1"
+ uci commit firewall
+Перезапустить фаервол :
+ fw3 restart
+ 
+Если не включен параметр DISABLE_IPV6,
 Посмотреть через iptables -nL или через luci вкладку "firewall" появились ли нужные правила.
 
 ЭКОНОМИЯ МЕСТА : если его мало, то можно оставить в директории zapret лишь подкаталог ipset, файл config и init.d/openwrt.

init.d/openwrt/firewall.zapret.nfqws_all

@@ -1,11 +1,6 @@
-QNUM=200
-IPT_FILTER_PRE="-p tcp --sport 80"
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK --sport 80"
 IPT_FILTER_POST="-p tcp --dport 80"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-ipt PREROUTING -t raw $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
-ipt POSTROUTING -t mangle $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+fw_nfqws

init.d/openwrt/firewall.zapret.nfqws_all6

@@ -0,0 +1,6 @@
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK --sport 80"
+IPT_FILTER_POST="-p tcp --dport 80"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_nfqws6

init.d/openwrt/firewall.zapret.nfqws_all_https

@@ -1,11 +1,6 @@
-QNUM=200
-IPT_FILTER_PRE="-p tcp -m multiport --sports 80,443"
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK -m multiport --sports 80,443"
 IPT_FILTER_POST="-p tcp --dport 80"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-ipt PREROUTING -t raw $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
-ipt POSTROUTING -t mangle $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+fw_nfqws

init.d/openwrt/firewall.zapret.nfqws_all_https6

@@ -0,0 +1,6 @@
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK -m multiport --sports 80,443"
+IPT_FILTER_POST="-p tcp --dport 80"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_nfqws6

init.d/openwrt/firewall.zapret.nfqws_ipset

@@ -1,11 +1,6 @@
-QNUM=200
-IPT_FILTER_PRE="-p tcp --sport 80 -m set --match-set zapret src"
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK --sport 80 -m set --match-set zapret src"
 IPT_FILTER_POST="-p tcp --dport 80 -m set --match-set zapret dst"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-ipt PREROUTING -t raw $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
-ipt POSTROUTING -t mangle $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+fw_nfqws

init.d/openwrt/firewall.zapret.nfqws_ipset6

@@ -0,0 +1,6 @@
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK --sport 80 -m set --match-set zapret6 src"
+IPT_FILTER_POST="-p tcp --dport 80 -m set --match-set zapret6 dst"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_nfqws6

init.d/openwrt/firewall.zapret.nfqws_ipset_https

@@ -1,11 +1,6 @@
-QNUM=200
-IPT_FILTER_PRE="-p tcp -m multiport --sports 80,443 -m set --match-set zapret src"
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK -m multiport --sports 80,443 -m set --match-set zapret src"
 IPT_FILTER_POST="-p tcp --dport 80 -m set --match-set zapret dst"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-ipt PREROUTING -t raw $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
-ipt POSTROUTING -t mangle $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+fw_nfqws

init.d/openwrt/firewall.zapret.nfqws_ipset_https6

@@ -0,0 +1,6 @@
+IPT_FILTER_PRE="-p tcp --tcp-flags SYN,ACK SYN,ACK -m multiport --sports 80,443 -m set --match-set zapret6 src"
+IPT_FILTER_POST="-p tcp --dport 80 -m set --match-set zapret6 dst"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_nfqws6

init.d/openwrt/firewall.zapret.tpws_all

@@ -1,21 +1,5 @@
-TPPORT_HTTP=1188
-TPWS_USER=daemon
 IPT_FILTER_HTTP="-p tcp --dport 80"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-. /lib/functions/network.sh
-network_find_wan wan_iface
-
-for ext_iface in $wan_iface; do
-    network_get_device DEVICE $ext_iface
-
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-done
-
-network_get_device DEVICE lan
-sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+fw_tpws

init.d/openwrt/firewall.zapret.tpws_all6

@@ -0,0 +1,5 @@
+IPT_FILTER_HTTP="-p tcp --dport 80"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_tpws6

init.d/openwrt/firewall.zapret.tpws_all_https

@@ -1,25 +1,6 @@
-TPPORT_HTTP=1188
-TPPORT_HTTPS=1189
-TPWS_USER=daemon
 IPT_FILTER_HTTP="-p tcp --dport 80"
 IPT_FILTER_HTTPS="-p tcp --dport 443"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-. /lib/functions/network.sh
-network_find_wan wan_iface
-
-for ext_iface in $wan_iface; do
-    network_get_device DEVICE $ext_iface
-
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
-done
-
-network_get_device DEVICE lan
-sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
+fw_tpws_https

init.d/openwrt/firewall.zapret.tpws_all_https6

@@ -0,0 +1,6 @@
+IPT_FILTER_HTTP="-p tcp --dport 80"
+IPT_FILTER_HTTPS="-p tcp --dport 443"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_tpws_https6

init.d/openwrt/firewall.zapret.tpws_hostlist6

@@ -0,0 +1 @@
+firewall.zapret.tpws_all6

init.d/openwrt/firewall.zapret.tpws_ipset

@@ -1,21 +1,5 @@
-TPPORT_HTTP=1188
-TPWS_USER=daemon
 IPT_FILTER_HTTP="-p tcp --dport 80 -m set --match-set zapret dst"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-. /lib/functions/network.sh
-network_find_wan wan_iface
-
-for ext_iface in $wan_iface; do
-    network_get_device DEVICE $ext_iface
-
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-done
-
-network_get_device DEVICE lan
-sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+fw_tpws

init.d/openwrt/firewall.zapret.tpws_ipset6

@@ -0,0 +1,5 @@
+IPT_FILTER_HTTP="-p tcp --dport 80 -m set --match-set zapret6 dst"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_tpws6

init.d/openwrt/firewall.zapret.tpws_ipset_https

@@ -1,25 +1,6 @@
-TPPORT_HTTP=1188
-TPPORT_HTTPS=1189
-TPWS_USER=daemon
 IPT_FILTER_HTTP="-p tcp --dport 80 -m set --match-set zapret dst"
 IPT_FILTER_HTTPS="-p tcp --dport 443 -m set --match-set zapret dst"
 
-ipt()
-{
- iptables -C $@ 2>/dev/null || iptables -I $@
-}
+. /opt/zapret/init.d/openwrt/functions
 
-. /lib/functions/network.sh
-network_find_wan wan_iface
-
-for ext_iface in $wan_iface; do
-    network_get_device DEVICE $ext_iface
-
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
-done
-
-network_get_device DEVICE lan
-sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
-ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
+fw_tpws_https

init.d/openwrt/firewall.zapret.tpws_ipset_https6

@@ -0,0 +1,6 @@
+IPT_FILTER_HTTP="-p tcp --dport 80 -m set --match-set zapret6 dst"
+IPT_FILTER_HTTPS="-p tcp --dport 443 -m set --match-set zapret6 dst"
+
+. /opt/zapret/init.d/openwrt/functions
+
+fw_tpws_https6

init.d/openwrt/functions

@@ -0,0 +1,157 @@
+. /lib/functions/network.sh
+
+QNUM=200
+TPPORT_HTTP=1188
+TPPORT_HTTPS=1189
+TPWS_USER=daemon
+
+exists()
+{
+ which $1 >/dev/null 2>/dev/null
+}
+
+# can be multiple ipv6 outgoing interfaces
+# uplink from isp, tunnelbroker, vpn, ...
+# want them all. who knows what's the real one that blocks sites
+# dont want any manual configuration - want to do it automatically
+# standard network_find_wan[6] return only the first
+# we use low level function from network.sh to avoid this limitation
+# it can change theoretically and stop working
+
+network_find_wan_all()
+{
+ __network_ifstatus "$1" "" "[@.route[@.target='0.0.0.0' && !@.table]].interface" "" 10 2>/dev/null && return
+ network_find_wan $1
+}
+network_find_wan6_all()
+{
+ __network_ifstatus "$1" "" "[@.route[@.target='::' && !@.table]].interface" "" 4 2>/dev/null && return
+ network_find_wan6 $1
+}
+
+ipt()
+{
+ iptables -C $@ 2>/dev/null || iptables -I $@
+}
+ipt6()
+{
+ ip6tables -C $@ 2>/dev/null || ip6tables -I $@
+}
+
+# there's no route_localnet for ipv6
+# the best we can is to route to link local of the incoming interface
+# OUTPUT - can DNAT to ::1
+# PREROUTING - can't DNAT to ::1. can DNAT to link local of -i interface or to any global addr
+# not a good idea to expose tpws to the world (bind to ::)
+
+get_ipv6_linklocal()
+{
+ # $1 - interface name. if empty - any interface
+ if exists ip ; then
+    local dev
+    [ -n "$1" ] && dev="dev $1"
+    ip addr show $dev | sed -e 's/^.*inet6 \([^ ]*\)\/[0-9]* scope link.*$/\1/;t;d' | head -n 1
+ else
+    ifconfig $1 | sed -re 's/^.*inet6 addr: ([^ ]*)\/[0-9]* Scope:Link.*$/\1/;t;d' | head -n 1
+ fi
+}
+get_ipv6_global()
+{
+ # $1 - interface name. if empty - any interface
+ if exists ip ; then
+    local dev
+    [ -n "$1" ] && dev="dev $1"
+    ip addr show $dev | sed -e 's/^.*inet6 \([^ ]*\)\/[0-9]* scope global.*$/\1/;t;d' | head -n 1
+ else
+    ifconfig $1 | sed -re 's/^.*inet6 addr: ([^ ]*)\/[0-9]* Scope:Global.*$/\1/;t;d' | head -n 1
+ fi
+}
+
+dnat6_target()
+{
+ # get target ip address for DNAT. prefer link locals
+ # tpws should be as inaccessible from outside as possible
+ [ -n "$DNAT6_TARGET" ] || {
+    local DEVICE
+    network_get_device DEVICE lan
+    DNAT6_TARGET=$(get_ipv6_linklocal $DEVICE)
+    [ -z "$DNAT6_TARGET" ] && DNAT6_TARGET=$(get_ipv6_global $DEVICE)
+ }
+}
+
+
+
+fw_nfqws()
+{
+ local DEVICE wan_iface
+ network_find_wan_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt POSTROUTING -t mangle -o $DEVICE $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+    ipt PREROUTING -t raw -i $DEVICE $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
+ done
+}
+fw_nfqws6()
+{
+ local DEVICE wan_iface
+ network_find_wan6_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt6 POSTROUTING -t mangle -o $DEVICE $IPT_FILTER_POST -j NFQUEUE --queue-num $QNUM --queue-bypass
+    ipt6 PREROUTING -t raw -i $DEVICE $IPT_FILTER_PRE -j NFQUEUE --queue-num $QNUM --queue-bypass
+ done
+}
+
+fw_tpws()
+{
+ local DEVICE wan_iface
+ network_find_wan_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+ done
+ network_get_device DEVICE lan
+ sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
+ ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+}
+fw_tpws_https()
+{
+ local DEVICE wan_iface
+ network_find_wan_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+    ipt OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
+ done
+ network_get_device DEVICE lan
+ sysctl -w net.ipv4.conf.$DEVICE.route_localnet=1
+ ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTP -j DNAT --to 127.0.0.1:$TPPORT_HTTP
+ ipt prerouting_lan_rule -t nat $IPT_FILTER_HTTPS -j DNAT --to 127.0.0.1:$TPPORT_HTTPS
+}
+
+fw_tpws6()
+{
+ local DEVICE wan_iface ip6
+ network_find_wan6_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt6 OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to [::1]:$TPPORT_HTTP
+ done
+ network_get_device DEVICE lan
+ dnat6_target
+ ipt6 PREROUTING -t nat -i $DEVICE $IPT_FILTER_HTTP -j DNAT --to [$DNAT6_TARGET]:$TPPORT_HTTP
+}
+fw_tpws_https6()
+{
+ local DEVICE wan_iface ip6
+ network_find_wan6_all wan_iface
+ for ext_iface in $wan_iface; do
+    network_get_device DEVICE $ext_iface
+    ipt6 OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTP -j DNAT --to [::1]:$TPPORT_HTTP
+    ipt6 OUTPUT -t nat -o $DEVICE -m owner ! --uid-owner $TPWS_USER $IPT_FILTER_HTTPS -j DNAT --to [::1]:$TPPORT_HTTPS
+ done
+ network_get_device DEVICE lan
+ dnat6_target
+ ipt6 PREROUTING -t nat -i $DEVICE $IPT_FILTER_HTTP -j DNAT --to [$DNAT6_TARGET]:$TPPORT_HTTP
+ ipt6 PREROUTING -t nat -i $DEVICE $IPT_FILTER_HTTPS -j DNAT --to [$DNAT6_TARGET]:$TPPORT_HTTPS
+}

init.d/openwrt/zapret

@@ -4,6 +4,8 @@ USE_PROCD=1
 # start betfore firewall - we need ipset populated
 START=18
 
+. /lib/functions/network.sh
+
 ZAPRET_BASE=/opt/zapret
 # SHOULD EDIT config
 . "$ZAPRET_BASE/config"
@@ -17,15 +19,17 @@ QNUM=200
 NFQWS=$ZAPRET_BASE/nfq/nfqws
 NFQWS_OPT_BASE="--qnum=$QNUM"
 
+TPWS_USER=daemon
 TPPORT_HTTP=1188
 TPPORT_HTTPS=1189
 TPWS=$ZAPRET_BASE/tpws/tpws
-TPWS_USER=daemon
 TPWS_HOSTLIST=$ZAPRET_BASE/ipset/zapret-hosts.txt.gz
 [ -f "$TPWS_HOSTLIST" ] || TPWS_HOSTLIST=$ZAPRET_BASE/ipset/zapret-hosts-user.txt
 TPWS_OPT_BASE="--user=$TPWS_USER --bind-addr=127.0.0.1"
-TPWS_OPT_BASE_HTTP="--port=$TPPORT_HTTP $TPWS_OPT_BASE"
-TPWS_OPT_BASE_HTTPS="--port=$TPPORT_HTTPS $TPWS_OPT_BASE"
+TPWS_OPT_BASE6="--user=$TPWS_USER --bind-addr=::1"
+TPWS_OPT_BASE6_PRE="--user=$TPWS_USER --bind-linklocal=prefer"
+TPWS_OPT_BASE_HTTP="--port=$TPPORT_HTTP"
+TPWS_OPT_BASE_HTTPS="--port=$TPPORT_HTTPS"
 
 
 run_daemon()
@@ -48,20 +52,38 @@ create_ipset()
 	$IPSET_CR
 }
 
+run_tpws()
+{
+	[ "$DISABLE_IPV4" != "1" ] && run_daemon $1 $TPWS "$TPWS_OPT_BASE $2"
+	[ "$DISABLE_IPV6" != "1" ] && {
+		run_daemon $((60+$1)) $TPWS "$TPWS_OPT_BASE6 $2"
+		network_get_device DEVICE lan
+		[ -n "$DEVICE" ] && run_daemon $((660+$1)) $TPWS "$TPWS_OPT_BASE6_PRE --bind-iface6=$DEVICE $2"
+	}
+}
+stop_tpws()
+{
+	[ "$DISABLE_IPV4" != "1" ] && stop_daemon $1 $TPWS
+	[ "$DISABLE_IPV6" != "1" ] && {
+		stop_daemon $((60+$1)) $TPWS
+		stop_daemon $((660+$1)) $TPWS
+	}
+}
+
 
 start_service() {
 	case "${MODE}" in
 	    tpws_hostlist)
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP --hostlist=$TPWS_HOSTLIST"
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP --hostlist=$TPWS_HOSTLIST"
 			;;
 	    tpws_ipset|tpws_all)
 			create_ipset
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
 			;;
 	    tpws_ipset_https|tpws_all_https)
 			create_ipset
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
-		run_daemon 2 $TPWS "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			run_tpws 2 "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
 			;;
 	    nfqws_ipset|nfqws_ipset_https)
 			create_ipset

init.d/sysv/zapret

@@ -21,15 +21,21 @@ QNUM=200
 NFQWS=$ZAPRET_BASE/nfq/nfqws
 NFQWS_OPT_BASE="--qnum=$QNUM"
 
+TPWS_USER=tpws
 TPPORT_HTTP=1188
 TPPORT_HTTPS=1189
 TPWS=$ZAPRET_BASE/tpws/tpws
-TPWS_USER=tpws
 TPWS_HOSTLIST=$ZAPRET_BASE/ipset/zapret-hosts.txt.gz
 [ -f "$TPWS_HOSTLIST" ] || TPWS_HOSTLIST=$ZAPRET_BASE/ipset/zapret-hosts-user.txt
 TPWS_OPT_BASE="--user=$TPWS_USER --bind-addr=127.0.0.1"
-TPWS_OPT_BASE_HTTP="--port=$TPPORT_HTTP $TPWS_OPT_BASE"
-TPWS_OPT_BASE_HTTPS="--port=$TPPORT_HTTPS $TPWS_OPT_BASE"
+TPWS_OPT_BASE6="--user=$TPWS_USER --bind-addr=::1"
+TPWS_OPT_BASE6_PRE="--user=$TPWS_USER --bind-linklocal=prefer"
+TPWS_OPT_BASE_HTTP="--port=$TPPORT_HTTP"
+TPWS_OPT_BASE_HTTPS="--port=$TPPORT_HTTPS"
+
+[ -n "$IFACE_WAN" ] && IPT_OWAN="-o $IFACE_WAN"
+[ -n "$IFACE_WAN" ] && IPT_IWAN="-i $IFACE_WAN"
+[ -n "$IFACE_LAN" ] && IPT_ILAN="-i $IFACE_LAN"
 
 exists()
 {
@@ -38,61 +44,149 @@ exists()
 
 ipt()
 {
-	if [ "$INIT_APPLY_FW" = "1" ]; then
 	iptables -C $@ 2>/dev/null || iptables -I $@
-	fi
 }
 ipt_del()
 {
-	[ "$INIT_APPLY_FW" = "1" ] && iptables -C $@ 2>/dev/null && iptables -D $@
+	iptables -C $@ 2>/dev/null && iptables -D $@
+}
+ipt6()
+{
+	ip6tables -C $@ 2>/dev/null || ip6tables -I $@
 }
+ipt6_del()
+{
+	ip6tables -C $@ 2>/dev/null && ip6tables -D $@
+}
+
+# there's no route_localnet for ipv6
+# the best we can is to route to link local of the incoming interface
+# OUTPUT - can DNAT to ::1
+# PREROUTING - can't DNAT to ::1. can DNAT to link local of -i interface or to any global addr
+# not a good idea to expose tpws to the world (bind to ::)
+
+get_ipv6_linklocal()
+{
+	# $1 - interface name. if empty - any interface
+	local dev
+	[ -n "$1" ] && dev="dev $1"
+	ip addr show $dev | sed -e 's/^.*inet6 \([^ ]*\)\/[0-9]* scope link.*$/\1/;t;d' | head -n 1
+}
+get_ipv6_global()
+{
+	# $1 - interface name. if empty - any interface
+	local dev
+	[ -n "$1" ] && dev="dev $1"
+	ip addr show $dev | sed -e 's/^.*inet6 \([^ ]*\)\/[0-9]* scope global.*$/\1/;t;d' | head -n 1
+}
+dnat6_target()
+{
+	# get target ip address for DNAT. prefer link locals
+	# tpws should be as inaccessible from outside as possible
+	[ -n "$DNAT6_TARGET" ] || {
+		DNAT6_TARGET=$(get_ipv6_linklocal $IFACE_LAN)
+		[ -z "$DNAT6_TARGET" ] && DNAT6_TARGET=$(get_ipv6_global $IFACE_LAN)
+	}
+}
+
 
 fw_tpws_add()
 {
-	# $1 - iptable filter
-	# $2 - tpws port
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	# $3 - tpws port
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Adding iptables rule for tpws : $1"
-	[ -n "$SLAVE_ETH" ] && {
-		ipt PREROUTING -t nat -i $SLAVE_ETH -p tcp $1 -j DNAT --to 127.0.0.1:$2
+		[ -n "$IFACE_LAN" ] && {
+			ipt PREROUTING -t nat $IPT_ILAN -p tcp $1 -j DNAT --to 127.0.0.1:$3
+	 	}
+		ipt OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $TPWS_USER -p tcp $1 -j DNAT --to 127.0.0.1:$3
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Adding ip6tables rule for tpws : $2"
+		[ -n "$IFACE_LAN" ] && {
+			dnat6_target
+			ipt6 PREROUTING -t nat $IPT_ILAN -p tcp $2 -j DNAT --to [$DNAT6_TARGET]:$3
+	 	}
+		ipt6 OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $TPWS_USER -p tcp $2 -j DNAT --to [::1]:$3
 	}
-	ipt OUTPUT -t nat -m owner ! --uid-owner $TPWS_USER -p tcp $1 -j DNAT --to 127.0.0.1:$2
-
 }
 fw_tpws_del()
 {
-	# $1 - iptable filter
-	# $2 - tpws port
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	# $3 - tpws port
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Deleting iptables rule for tpws : $1"
-	[ -n "$SLAVE_ETH" ] && {
-		ipt PREROUTING -t nat -i $SLAVE_ETH -p tcp $1 -j DNAT --to 127.0.0.1:$2
+		[ -n "$IFACE_LAN" ] && {
+			ipt_del PREROUTING -t nat $IPT_ILAN -p tcp $1 -j DNAT --to 127.0.0.1:$3
+		}
+		ipt_del OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $TPWS_USER -p tcp $1 -j DNAT --to 127.0.0.1:$3
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Deleting ip6tables rule for tpws : $2"
+		[ -n "$IFACE_LAN" ] && {
+			dnat6_target
+			ipt6_del PREROUTING -t nat $IPT_ILAN -p tcp $2 -j DNAT --to [$DNAT6_TARGET]:$3
+		}
+		ipt6_del OUTPUT -t nat $IPT_OWAN -m owner ! --uid-owner $TPWS_USER -p tcp $2 -j DNAT --to [::1]:$3
 	}
-	ipt_del OUTPUT -t nat -m owner ! --uid-owner $TPWS_USER -p tcp $1 -j DNAT --to 127.0.0.1:$2
 }
+
 fw_nfqws_add_pre()
 {
-	# $1 - iptable filter
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Adding iptables rule for nfqws prerouting : $1"
-	ipt PREROUTING -t raw -p tcp --tcp-flags SYN,ACK SYN,ACK $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+		ipt PREROUTING -t raw $IPT_IWAN -p tcp --tcp-flags SYN,ACK SYN,ACK $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Adding ip6tables rule for nfqws prerouting : $2"
+		ipt6 PREROUTING -t raw $IPT_IWAN -p tcp --tcp-flags SYN,ACK SYN,ACK $2 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
 }
 fw_nfqws_del_pre()
 {
-	# $1 - iptable filter
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Deleting iptables rule for nfqws prerouting : $1"
-	ipt_del PREROUTING -t raw -p tcp --tcp-flags SYN,ACK SYN,ACK $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+		ipt_del PREROUTING -t raw $IPT_IWAN -p tcp --tcp-flags SYN,ACK SYN,ACK $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Deleting ip6tables rule for nfqws prerouting : $2"
+		ipt6_del PREROUTING -t raw $IPT_IWAN -p tcp --tcp-flags SYN,ACK SYN,ACK $2 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
 }
 fw_nfqws_add_post()
 {
-	# $1 - iptable filter
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Adding iptables rule for nfqws postrouting : $1"
-	ipt POSTROUTING -t mangle -p tcp $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+		ipt POSTROUTING -t mangle $IPT_OWAN -p tcp $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Adding ip6tables rule for nfqws postrouting : $2"
+		ipt6 POSTROUTING -t mangle $IPT_OWAN -p tcp $2 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
 }
 fw_nfqws_del_post()
 {
-	# $1 - iptable filter
+	# $1 - iptable filter for ipv4
+	# $2 - iptable filter for ipv6
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV4" != "1" ] && {
 		echo "Deleting iptables rule for nfqws postrouting : $1"
-	ipt_del POSTROUTING -t mangle -p tcp $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+		ipt_del POSTROUTING -t mangle $IPT_OWAN -p tcp $1 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
+	[ "$INIT_APPLY_FW" = "1" ] && [ "$DISABLE_IPV6" != "1" ] && {
+		echo "Deleting ip6tables rule for nfqws postrouting : $2"
+		ipt6_del POSTROUTING -t mangle $IPT_OWAN -p tcp $2 -j NFQUEUE --queue-num $QNUM --queue-bypass
+	}
 }
 
+
 run_daemon()
 {
 	# $1 - daemon number : 1,2,3,...
@@ -151,6 +245,23 @@ prepare_tpws()
 	for iface in /proc/sys/net/ipv4/conf/*; do sysctl -qw net.ipv4.conf.$(basename $iface).route_localnet=1; done
 }
 
+run_tpws()
+{
+	[ "$DISABLE_IPV4" != "1" ] && run_daemon $1 $TPWS "$TPWS_OPT_BASE $2"
+	[ "$DISABLE_IPV6" != "1" ] && {
+		run_daemon $((60+$1)) $TPWS "$TPWS_OPT_BASE6 $2"
+		[ -n "$IFACE_LAN" ] && run_daemon $((660+$1)) $TPWS "$TPWS_OPT_BASE6_PRE --bind-iface6=$IFACE_LAN $2"
+	}
+}
+stop_tpws()
+{
+	[ "$DISABLE_IPV4" != "1" ] && stop_daemon $1 $TPWS
+	[ "$DISABLE_IPV6" != "1" ] && {
+		stop_daemon $((60+$1)) $TPWS
+		[ -n "$IFACE_LAN" ] && stop_daemon $((660+$1)) $TPWS
+	}
+}
+
 
 create_ipset()
 {
@@ -163,55 +274,55 @@ case "$1" in
 	case "${MODE}" in
 	    tpws_hostlist)
 			prepare_tpws
-		fw_tpws_add "--dport 80" $TPPORT_HTTP
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP --hostlist=$TPWS_HOSTLIST"
+			fw_tpws_add "--dport 80" "--dport 80" $TPPORT_HTTP
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP --hostlist=$TPWS_HOSTLIST"
 			;;
 	    tpws_ipset)
 			create_ipset
 			prepare_tpws
-		fw_tpws_add "--dport 80 -m set --match-set zapret dst" $TPPORT_HTTP
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			fw_tpws_add "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst" $TPPORT_HTTP
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
 			;;
 	    tpws_ipset_https)
 			create_ipset
 			prepare_tpws
-		fw_tpws_add "--dport 80 -m set --match-set zapret dst" $TPPORT_HTTP
-		fw_tpws_add "--dport 443 -m set --match-set zapret dst" $TPPORT_HTTPS
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
-		run_daemon 2 $TPWS "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
+			fw_tpws_add "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst" $TPPORT_HTTP
+			fw_tpws_add "--dport 443 -m set --match-set zapret dst" "--dport 443 -m set --match-set zapret6 dst" $TPPORT_HTTPS
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			run_tpws 2 "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
 			;;
 	    tpws_all)
 			prepare_tpws
-		fw_tpws_add "--dport 80" $TPPORT_HTTP
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			fw_tpws_add "--dport 80" "--dport 80" $TPPORT_HTTP
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
 			;;
 	    tpws_all_https)
 			prepare_tpws
-		fw_tpws_add "--dport 80" $TPPORT_HTTP
-		fw_tpws_add "--dport 443" $TPPORT_HTTPS
-		run_daemon 1 $TPWS "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
-		run_daemon 2 $TPWS "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
+			fw_tpws_add "--dport 80" "--dport 80" $TPPORT_HTTP
+			fw_tpws_add "--dport 443" "--dport 443" $TPPORT_HTTPS
+			run_tpws 1 "$TPWS_OPT_BASE_HTTP $TPWS_OPT_HTTP"
+			run_tpws 2 "$TPWS_OPT_BASE_HTTPS $TPWS_OPT_HTTPS"
 			;;
 	    nfqws_ipset)
 			create_ipset
-		fw_nfqws_add_pre "--sport 80 -m set --match-set zapret src"
-		fw_nfqws_add_post "--dport 80 -m set --match-set zapret dst"
+			fw_nfqws_add_pre "--sport 80 -m set --match-set zapret src" "--sport 80 -m set --match-set zapret6 src"
+			fw_nfqws_add_post "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst"
 			run_daemon 1 $NFQWS "$NFQWS_OPT_BASE $NFQWS_OPT"
 			;;
 	    nfqws_ipset_https)
 			create_ipset
-		fw_nfqws_add_pre "-m multiport --sports 80,443 -m set --match-set zapret src"
-		fw_nfqws_add_post "--dport 80 -m set --match-set zapret dst"
+			fw_nfqws_add_pre "-m multiport --sports 80,443 -m set --match-set zapret src" "-m multiport --sports 80,443 -m set --match-set zapret6 src"
+			fw_nfqws_add_post "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst"
 			run_daemon 1 $NFQWS "$NFQWS_OPT_BASE $NFQWS_OPT"
 			;;
 	    nfqws_all)
-		fw_nfqws_add_pre "--sport 80"
-		fw_nfqws_add_post "--dport 80"
+			fw_nfqws_add_pre "--sport 80" "--sport 80"
+			fw_nfqws_add_post "--dport 80" "--dport 80"
 			run_daemon 1 $NFQWS "$NFQWS_OPT_BASE $NFQWS_OPT"
 			;;
 	    nfqws_all_https)
-		fw_nfqws_add_pre "-m multiport --sports 80,443"
-		fw_nfqws_add_post "--dport 80"
+			fw_nfqws_add_pre "-m multiport --sports 80,443" "-m multiport --sports 80,443"
+			fw_nfqws_add_post "--dport 80" "--dport 80"
 			run_daemon 1 $NFQWS "$NFQWS_OPT_BASE $NFQWS_OPT"
 			;;
 	    ipset)
@@ -231,43 +342,43 @@ case "$1" in
   stop)
 	case "${MODE}" in
 	    tpws_hostlist|tpws_all)
-		fw_tpws_del "--dport 80" $TPPORT_HTTP
-		stop_daemon 1 $TPWS
+			fw_tpws_del "--dport 80" "--dport 80" $TPPORT_HTTP
+			stop_tpws 1
 			;;
 	    tpws_ipset)
-		fw_tpws_del "--dport 80 -m set --match-set zapret dst" $TPPORT_HTTP
-		stop_daemon 1 $TPWS
+			fw_tpws_del "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst" $TPPORT_HTTP
+			stop_tpws 1
 			;;
 	    tpws_ipset_https)
-		fw_tpws_del "--dport 80 -m set --match-set zapret dst" $TPPORT_HTTP
-		fw_tpws_del "--dport 443 -m set --match-set zapret dst" $TPPORT_HTTPS
-		stop_daemon 1 $TPWS
-		stop_daemon 2 $TPWS
+			fw_tpws_del "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst" $TPPORT_HTTP
+			fw_tpws_del "--dport 443 -m set --match-set zapret dst" "--dport 443 -m set --match-set zapret6 dst" $TPPORT_HTTPS
+			stop_tpws 1
+			stop_tpws 2
 			;;
 	    tpws_all_https)
-		fw_tpws_del "--dport 80" $TPPORT_HTTP
-		fw_tpws_del "--dport 443" $TPPORT_HTTPS
-		stop_daemon 1 $TPWS
-		stop_daemon 2 $TPWS
+			fw_tpws_del "--dport 80" "--dport 80" $TPPORT_HTTP
+			fw_tpws_del "--dport 443" "--dport 443" $TPPORT_HTTPS
+			stop_tpws 1
+			stop_tpws 2
 			;;
 	    nfqws_ipset)
-		fw_nfqws_del_pre "--sport 80 -m set --match-set zapret src"
-		fw_nfqws_del_post "--dport 80 -m set --match-set zapret dst"
+			fw_nfqws_del_pre "--sport 80 -m set --match-set zapret src" "--sport 80 -m set --match-set zapret6 src"
+			fw_nfqws_del_post "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst"
 			stop_daemon 1 $NFQWS
 			;;
 	    nfqws_ipset_https)
-		fw_nfqws_del_pre "-m multiport --sports 80,443 -m set --match-set zapret src"
-		fw_nfqws_del_post "--dport 80 -m set --match-set zapret dst"
+			fw_nfqws_del_pre "-m multiport --sports 80,443 -m set --match-set zapret src" "-m multiport --sports 80,443 -m set --match-set zapret6 src"
+			fw_nfqws_del_post "--dport 80 -m set --match-set zapret dst" "--dport 80 -m set --match-set zapret6 dst"
 			stop_daemon 1 $NFQWS
 			;;
 	    nfqws_all)
-		fw_nfqws_del_pre "--sport 80"
-		fw_nfqws_del_post "--dport 80"
+			fw_nfqws_del_pre "--sport 80" "--sport 80"
+			fw_nfqws_del_post "--dport 80" "--dport 80"
 			stop_daemon 1 $NFQWS
 			;;
 	    nfqws_all_https)
-		fw_nfqws_del_pre "-m multiport --sports 80,443"
-		fw_nfqws_del_post "--dport 80"
+			fw_nfqws_del_pre "-m multiport --sports 80,443" "-m multiport --sports 80,443"
+			fw_nfqws_del_post "--dport 80" "--dport 80"
 			stop_daemon 1 $NFQWS
 			;;
 	    custom)

install_easy.sh

@@ -348,9 +348,7 @@ download_list()
 		echo \* downloading blocked ip/host list
 
 		# can be txt or txt.gz
-		rm -f "$EXEDIR/ipset/zapret-ip.txt"* "$EXEDIR/ipset/zapret-ip-user.txt"* \
-			"$EXEDIR/ipset/zapret-ip-ipban.txt"* "$EXEDIR/ipset/zapret-ip-user-ipban.txt"* \
-			"$EXEDIR/ipset/zapret-hosts.txt"*
+		"$EXEDIR/ipset/clear_lists.sh"
 		"$GET_LIST" || {
 			echo could not download ip list
 			exitp 25
@@ -439,10 +437,11 @@ check_prerequisites_openwrt()
 	echo \* checking prerequisites
 
 	local PKGS="iptables-mod-extra iptables-mod-nfqueue iptables-mod-filter iptables-mod-ipopt ipset curl"
+	[ "$DISABLE_IPV6" != "1" ] && PKGS="$PKGS kmod-ipt-nat6"
 	local UPD=0
 	
 	# in recent lede/openwrt iptable_raw in separate package
-	if check_kmod iptable_raw && check_packages_openwrt $PKGS ; then
+	if ([ "$DISABLE_IPV6" = "1" ] || check_kmod ip6table_nat) && check_kmod iptable_raw && check_packages_openwrt $PKGS ; then
 		echo everything is present
 	else
 		echo \* installing prerequisites
@@ -488,6 +487,7 @@ check_prerequisites_openwrt()
 
 openwrt_fw_section_find()
 {
+	# $1 - fw include postfix
 	# echoes section number
 	
 	i=0
@@ -495,9 +495,8 @@ openwrt_fw_section_find()
 	do
 		path=$(uci -q get firewall.@include[$i].path)
 		[ -n "$path" ] || break
-		[ "$path" == "$OPENWRT_FW_INCLUDE" ] && {
+		[ "$path" == "$OPENWRT_FW_INCLUDE$1" ] && {
 	 		echo $i
-		 	true
 	 		return
 		}
 		i=$(($i+1))
@@ -507,27 +506,30 @@ openwrt_fw_section_find()
 }
 openwrt_fw_section_add()
 {
+	# $1 - fw include postfix
 	# echoes section number
 
-	openwrt_fw_section_find ||
+	openwrt_fw_section_find $1 ||
 	{
 		uci add firewall include >/dev/null || return
 		echo -1
-		true
 	}
 }
 openwrt_fw_section_del()
 {
-	local id=$(openwrt_fw_section_find)
+	# $1 - fw include postfix
+	local id=$(openwrt_fw_section_find $1)
 	[ -n "$id" ] && {
 		uci delete firewall.@include[$id] && uci commit firewall
+		rm -f "$OPENWRT_FW_INCLUDE$1"
 	}
 }
 openwrt_fw_section_configure()
 {
-	local id=$(openwrt_fw_section_add)
+	# $1 - fw include postfix
+	local id=$(openwrt_fw_section_add $1)
 	[ -z "$id" ] ||
-	 ! uci set firewall.@include[$id].path="$OPENWRT_FW_INCLUDE" ||
+	 ! uci set firewall.@include[$id].path="$OPENWRT_FW_INCLUDE$1" ||
 	 ! uci set firewall.@include[$id].reload="1" ||
 	 ! uci commit firewall &&
 	{
@@ -538,24 +540,39 @@ openwrt_fw_section_configure()
 
 install_openwrt_firewall()
 {
-	echo \* installing firewall script
+	# $1 - fw include postfix
+
+	echo \* installing firewall script $1
 	
 	[ -n "MODE" ] || {
 		echo should specify MODE in $ZAPRET_CONFIG
 		exitp 7
 	}
 	
-	local FW_SCRIPT_SRC="$FW_SCRIPT_SRC_DIR.$MODE"
+	local FW_SCRIPT_SRC="$FW_SCRIPT_SRC_DIR.$MODE$1"
 	[ -f "$FW_SCRIPT_SRC" ] || {
 		echo firewall script $FW_SCRIPT_SRC not found. removing firewall include
 		openwrt_fw_section_del
-		rm -f "$OPENWRT_FW_INCLUDE"
 		return
 	}
-	echo "linking : $FW_SCRIPT_SRC => $OPENWRT_FW_INCLUDE"
-	ln -fs "$FW_SCRIPT_SRC" "$OPENWRT_FW_INCLUDE"
+	echo "linking : $FW_SCRIPT_SRC => $OPENWRT_FW_INCLUDE$1"
+	ln -fs "$FW_SCRIPT_SRC" "$OPENWRT_FW_INCLUDE$1"
 	
-	openwrt_fw_section_configure
+	openwrt_fw_section_configure $1
+}
+
+install_openwrt_firewall_all()
+{
+	if [ "$DISABLE_IPV4" = "1" ] ; then
+		openwrt_fw_section_del
+	else
+		install_openwrt_firewall
+	fi
+	if [ "$DISABLE_IPV6" = "1" ] ; then
+		openwrt_fw_section_del 6
+	else
+		install_openwrt_firewall 6
+	fi
 }
 
 restart_openwrt_firewall()
@@ -568,6 +585,14 @@ restart_openwrt_firewall()
 	}
 }
 
+remove_openwrt_firewall()
+{
+	echo \* removing firewall script
+	
+	openwrt_fw_section_del
+	openwrt_fw_section_del 6
+}
+
 install_sysv_init()
 {
 	echo \* installing init script
@@ -600,11 +625,14 @@ install_openwrt()
 	install_binaries
 	ask_config
 	install_sysv_init
+	# can be previous firewall preventing access
+	remove_openwrt_firewall
+	restart_openwrt_firewall
 	download_list
 	# router system : works 24/7. night is the best time
 	crontab_add 0 6
 	service_start_sysv
-	install_openwrt_firewall
+	install_openwrt_firewall_all
 	restart_openwrt_firewall
 }
 

ipset/clear_lists.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+SCRIPT=$(readlink -f "$0")
+EXEDIR=$(dirname "$SCRIPT")
+
+. "$EXEDIR/def.sh"
+
+rm -f "$ZIPLIST"* "$ZIPLIST6"* "$ZIPLIST_USER" "$ZIPLIST_USER6" "$ZIPLIST_IPBAN"* "$ZIPLIST_IPBAN6"* "$ZIPLIST_USER_IPBAN" "$ZIPLIST_USER_IPBAN6" "$ZHOSTLIST"*

ipset/create_ipset.sh

@@ -23,15 +23,15 @@ do
  zzexist "$f" && {
   if [ -x "$IP2NET" ]; then
    echo Adding to ipset $2 \($IPSTYPE , ip2net\) : $f
-   if [ -f "$ZIPLIST_EXCLUDE" ] ; then
-    zzcat "$f" | grep -vxFf "$ZIPLIST_EXCLUDE" | "$IP2NET" | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
+   if [ -f "$5" ] ; then
+    zzcat "$f" | grep -vxFf "$5" | "$IP2NET" | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
    else
     zzcat "$f" | "$IP2NET" | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
    fi
   else
    echo Adding to ipset $2 \($IPSTYPE\) : $f
-   if [ -f "$ZIPLIST_EXCLUDE" ] ; then
-    zzcat "$f" | grep -vxFf "$ZIPLIST_EXCLUDE" | sort -u | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
+   if [ -f "$5" ] ; then
+    zzcat "$f" | grep -vxFf "$5" | sort -u | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
    else
     zzcat "$f" | sort -u | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
    fi
@@ -41,5 +41,32 @@ done
 return 0
 }
 
-create_ipset hash:ip $ZIPSET "$ZIPLIST" "$ZIPLIST_USER"
-create_ipset hash:ip $ZIPSET_IPBAN "$ZIPLIST_IPBAN" "$ZIPLIST_USER_IPBAN"
+create_ipset6()
+{
+local IPSTYPE=$1
+ipset flush $2 2>/dev/null || ipset create $2 $IPSTYPE $IPSET_OPT family inet6
+for f in "$3" "$4"
+do
+ zzexist "$f" && {
+   echo Adding to ipset $2 \($IPSTYPE\) : $f
+   if [ -f "$5" ] ; then
+    zzcat "$f" | grep -vxFf "$5" | sort -u | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
+   else
+    zzcat "$f" | sort -u | sed -nre "s/^.+$/add $2 &/p" | ipset -! restore
+   fi
+ }
+done
+return 0
+}
+
+[ "$DISABLE_IPV4" != "1" ] && {
+  create_ipset hash:ip $ZIPSET "$ZIPLIST" "$ZIPLIST_USER" "$ZIPLIST_EXCLUDE"
+  create_ipset hash:ip $ZIPSET_IPBAN "$ZIPLIST_IPBAN" "$ZIPLIST_USER_IPBAN" "$ZIPLIST_EXCLUDE"
+}
+
+[ "$DISABLE_IPV6" != "1" ] && {
+  create_ipset6 hash:ip $ZIPSET6 "$ZIPLIST6" "$ZIPLIST_USER6" "$ZIPLIST_EXCLUDE6"
+  create_ipset6 hash:ip $ZIPSET_IPBAN6 "$ZIPLIST_IPBAN6" "$ZIPLIST_USER_IPBAN6" "$ZIPLIST_EXCLUDE6"
+}
+
+true

ipset/def.sh

@@ -1,14 +1,23 @@
+. "$EXEDIR/../config"
+
 TMPDIR=/tmp
 ZIPSET=zapret
+ZIPSET6=zapret6
 ZIPLIST=$EXEDIR/zapret-ip.txt
+ZIPLIST6=$EXEDIR/zapret-ip6.txt
 ZIPLIST_EXCLUDE=$EXEDIR/zapret-ip-exclude.txt
+ZIPLIST_EXCLUDE6=$EXEDIR/zapret-ip-exclude6.txt
 ZIPLIST_USER=$EXEDIR/zapret-ip-user.txt
+ZIPLIST_USER6=$EXEDIR/zapret-ip-user6.txt
 ZUSERLIST=$EXEDIR/zapret-hosts-user.txt
 ZHOSTLIST=$EXEDIR/zapret-hosts.txt
 
 ZIPSET_IPBAN=ipban
+ZIPSET_IPBAN6=ipban6
 ZIPLIST_IPBAN=$EXEDIR/zapret-ip-ipban.txt
+ZIPLIST_IPBAN6=$EXEDIR/zapret-ip-ipban6.txt
 ZIPLIST_USER_IPBAN=$EXEDIR/zapret-ip-user-ipban.txt
+ZIPLIST_USER_IPBAN6=$EXEDIR/zapret-ip-user-ipban6.txt
 ZUSERLIST_IPBAN=$EXEDIR/zapret-hosts-user-ipban.txt
 
 MDIG=$EXEDIR/../mdig/mdig
@@ -33,30 +42,38 @@ zz()
 
 digger()
 {
- >&2 echo digging "$1" : domains=$(wc -l <"$1")
+ # $1 - hostlist
+ # $2 - family (4|6)
+ >&2 echo digging $(wc -l <"$1") ipv$2 domains : "$1"
 
  if [ -x "$MDIG" ]; then
-  zzcat "$1" | "$MDIG" --family=4 --threads=$MDIG_THREADS --stats=1000
+  zzcat "$1" | "$MDIG" --family=$2 --threads=$MDIG_THREADS --stats=1000
  else
-  zzcat "$1" | dig A +short +time=8 +tries=2 -f - | grep -E '^[^;].*[^\.]$'
+  local A=A
+  [ "$2" = "6" ] && A=AAAA
+  zzcat "$1" | dig $A +short +time=8 +tries=2 -f - | grep -E '^[^;].*[^\.]$'
  fi
 }
 
 cut_local()
 {
-  grep -vE '^192\.168\.[0-9]+\.[0-9]+$' |
-  grep -vE '^127\.[0-9]+\.[0-9]+\.[0-9]+$' |
-  grep -vE '^10\.[0-9]+\.[0-9]+\.[0-9]+$'
+  grep -vE '^192\.168\.|^127\.|^10\.'
+}
+cut_local6()
+{
+  grep -vE '^::|fc..:|fd..:'
 }
 
 
 getuser()
 {
  [ -f "$ZUSERLIST" ] && {
-  digger "$ZUSERLIST" | cut_local | sort -u > "$ZIPLIST_USER"
+  [ "$DISABLE_IPV4" != "1" ] && digger "$ZUSERLIST" 4 | cut_local | sort -u > "$ZIPLIST_USER"
+  [ "$DISABLE_IPV6" != "1" ] && digger "$ZUSERLIST" 6 | cut_local6 | sort -u > "$ZIPLIST_USER6"
  }
  [ -f "$ZUSERLIST_IPBAN" ] && {
-  digger "$ZUSERLIST_IPBAN" | cut_local | sort -u > "$ZIPLIST_USER_IPBAN"
+  [ "$DISABLE_IPV4" != "1" ] && digger "$ZUSERLIST_IPBAN" 4 | cut_local | sort -u > "$ZIPLIST_USER_IPBAN"
+  [ "$DISABLE_IPV6" != "1" ] && digger "$ZUSERLIST_IPBAN" 6 | cut_local6 | sort -u > "$ZIPLIST_USER_IPBAN6"
  }
 }
 

ipset/get_reestr.sh

@@ -14,6 +14,9 @@ ZURL=https://raw.githubusercontent.com/zapret-info/z-i/master/dump.csv
 
 getuser
 
+# both disabled
+[ "$DISABLE_IPV4" = "1" ] && [ "$DISABLE_IPV6" = "1" ] && exit 0
+
 curl -k --fail --max-time 150 --connect-timeout 5 --retry 3 --max-filesize 62914560 "$ZURL" >"$ZREESTR" ||
 {
  echo reestr list download failed   
@@ -29,12 +32,24 @@ echo preparing dig list ..
 #sed -nre 's/^[^;]*;([^;|\\]{4,250})\;.*$/\1/p' $ZREESTR | sort | uniq >$ZDIG
 cut -f2 -d ';' "$ZREESTR"  | grep -avE '^$|\*|:' >"$ZDIG"
 rm -f "$ZREESTR"
+
 echo digging started. this can take long ...
-digger "$ZDIG" | cut_local >"$ZIPLISTTMP" || {
+
+[ "$DISABLE_IPV4" != "1" ] && {
+ digger "$ZDIG" 4 | cut_local >"$ZIPLISTTMP" || {
+  rm -f "$ZDIG"
+  exit 1
+ }
+ sort -u "$ZIPLISTTMP" | zz "$ZIPLIST"
+ rm -f "$ZIPLISTTMP"
+}
+[ "$DISABLE_IPV6" != "1" ] && {
+ digger "$ZDIG" 6 | cut_local6 >"$ZIPLISTTMP" || {
   rm -f "$ZDIG"
   exit 1
+ }
+ sort -u "$ZIPLISTTMP" | zz "$ZIPLIST6"
+ rm -f "$ZIPLISTTMP"
 }
 rm -f "$ZDIG"
-sort -u "$ZIPLISTTMP" | zz "$ZIPLIST"
-rm -f "$ZIPLISTTMP"
 "$EXEDIR/create_ipset.sh"

tpws/hostlist.c

@@ -72,7 +72,7 @@ bool LoadHostList(strpool **hostlist, char *filename)
 	}
 	else
 	{
-		printf("loading plain text list\n",r);
+		printf("loading plain text list\n");
 		
 		while (fgets(s, 256, F))
 		{

tpws/tpws.c

@@ -5,6 +5,8 @@
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <netinet/ip.h>
+#include <net/if.h>
+#include <ifaddrs.h>
 #include <netdb.h>
 #include <unistd.h>
 #include <arpa/inet.h>
@@ -30,7 +32,8 @@ enum splithttpreq { split_none = 0, split_method, split_host };
 
 struct params_s
 {
-	char bindaddr[64];
+	char bindaddr[64],bindiface4[16],bindiface6[16];
+	bool bindll,bindll_force;
 	uid_t uid;
 	gid_t gid;
 	uint16_t port;
@@ -502,6 +505,9 @@ void exithelp()
 {
 	printf(
 		" --bind-addr=<ipv4_addr>|<ipv6_addr>\n"
+		" --bind-iface4=<interface_name>\t; bind to the first ipv4 addr of interface\n"
+		" --bind-iface6=<interface_name>\t; bind to the first ipv6 addr of interface\n"
+		" --bind-linklocal=prefer|force\t; prefer or force ipv6 link local\n"
 		" --port=<port>\n"
 		" --maxconn=<max_connections>\n"
 		" --hostlist=<filename>\t; only act on host in the list (one host per line, subdomains auto apply)\n"
@@ -552,22 +558,25 @@ void parse_params(int argc, char *argv[])
 		{ "help",no_argument,0,0 },// optidx=0
 		{ "h",no_argument,0,0 },// optidx=1
 		{ "bind-addr",required_argument,0,0 },// optidx=2
-		{ "port",required_argument,0,0 },// optidx=3
-		{ "daemon",no_argument,0,0 },// optidx=4
-		{ "user",required_argument,0,0 },// optidx=5
-		{ "maxconn",required_argument,0,0 },// optidx=6
-		{ "hostcase",no_argument,0,0 },// optidx=7
-		{ "hostspell",required_argument,0,0 },// optidx=8
-		{ "hostdot",no_argument,0,0 },// optidx=9
-		{ "hostnospace",no_argument,0,0 },// optidx=10
-		{ "split-http-req",required_argument,0,0 },// optidx=11
-		{ "split-pos",required_argument,0,0 },// optidx=12
-		{ "methodspace",no_argument,0,0 },// optidx=13
-		{ "methodeol",no_argument,0,0 },// optidx=14
-		{ "hosttab",no_argument,0,0 },// optidx=15
-		{ "unixeol",no_argument,0,0 },// optidx=16
-		{ "hostlist",required_argument,0,0 },// optidx=17
-		{ "pidfile",required_argument,0,0 },// optidx=18
+		{ "bind-iface4",required_argument,0,0 },// optidx=3
+		{ "bind-iface6",required_argument,0,0 },// optidx=4
+		{ "bind-linklocal",required_argument,0,0 },// optidx=5
+		{ "port",required_argument,0,0 },// optidx=6
+		{ "daemon",no_argument,0,0 },// optidx=7
+		{ "user",required_argument,0,0 },// optidx=8
+		{ "maxconn",required_argument,0,0 },// optidx=9
+		{ "hostcase",no_argument,0,0 },// optidx=10
+		{ "hostspell",required_argument,0,0 },// optidx=11
+		{ "hostdot",no_argument,0,0 },// optidx=12
+		{ "hostnospace",no_argument,0,0 },// optidx=13
+		{ "split-http-req",required_argument,0,0 },// optidx=14
+		{ "split-pos",required_argument,0,0 },// optidx=15
+		{ "methodspace",no_argument,0,0 },// optidx=16
+		{ "methodeol",no_argument,0,0 },// optidx=17
+		{ "hosttab",no_argument,0,0 },// optidx=18
+		{ "unixeol",no_argument,0,0 },// optidx=19
+		{ "hostlist",required_argument,0,0 },// optidx=20
+		{ "pidfile",required_argument,0,0 },// optidx=21
 		{ NULL,0,NULL,0 }
 	};
 	while ((v = getopt_long_only(argc, argv, "", long_options, &option_index)) != -1)
@@ -583,7 +592,35 @@ void parse_params(int argc, char *argv[])
 			strncpy(params.bindaddr, optarg, sizeof(params.bindaddr));
 			params.bindaddr[sizeof(params.bindaddr) - 1] = 0;
 			break;
-		case 3: /* qnum */
+		case 3: /* bind-iface4 */
+			if (*params.bindiface6)
+			{
+				fprintf(stderr, "can bind only to single ip address\n");
+				exit_clean(1);
+			}
+			strncpy(params.bindiface4, optarg, sizeof(params.bindiface4));
+			params.bindiface4[sizeof(params.bindiface4) - 1] = 0;
+			break;
+		case 4: /* bind-iface6 */
+			if (*params.bindiface4)
+			{
+				fprintf(stderr, "can bind only to single ip address\n");
+				exit_clean(1);
+			}
+			strncpy(params.bindiface6, optarg, sizeof(params.bindiface6));
+			params.bindiface6[sizeof(params.bindiface6) - 1] = 0;
+			break;
+		case 5: /* bind-linklocal */
+			params.bindll = true;
+			if (!strcmp(optarg, "force"))
+				params.bindll_force=true;
+			else if (strcmp(optarg, "prefer"))
+			{
+				fprintf(stderr, "invalid parameter in bind-linklocal : %s\n",optarg);
+				exit_clean(1);
+			}
+			break;
+		case 6: /* port */
 			i = atoi(optarg);
 			if (i <= 0 || i > 65535)
 			{
@@ -592,10 +629,10 @@ void parse_params(int argc, char *argv[])
 			}
 			params.port = (uint16_t)i;
 			break;
-		case 4: /* daemon */
+		case 7: /* daemon */
 			params.daemon = true;
 			break;
-		case 5: /* user */
+		case 8: /* user */
 		{
 			struct passwd *pwd = getpwnam(optarg);
 			if (!pwd)
@@ -607,7 +644,7 @@ void parse_params(int argc, char *argv[])
 			params.gid = pwd->pw_gid;
 			break;
 		}
-		case 6: /* maxconn */
+		case 9: /* maxconn */
 			params.maxconn = atoi(optarg);
 			if (params.maxconn <= 0)
 			{
@@ -615,10 +652,10 @@ void parse_params(int argc, char *argv[])
 				exit_clean(1);
 			}
 			break;
-		case 7: /* hostcase */
+		case 10: /* hostcase */
 			params.hostcase = true;
 			break;
-		case 8: /* hostspell */
+		case 11: /* hostspell */
 			if (strlen(optarg) != 4)
 			{
 				fprintf(stderr, "hostspell must be exactly 4 chars long\n");
@@ -627,13 +664,13 @@ void parse_params(int argc, char *argv[])
 			params.hostcase = true;
 			memcpy(params.hostspell, optarg, 4);
 			break;
-		case 9: /* hostdot */
+		case 12: /* hostdot */
 			params.hostdot = true;
 			break;
-		case 10: /* hostnospace */
+		case 13: /* hostnospace */
 			params.hostnospace = true;
 			break;
-		case 11: /* split-http-req */
+		case 14: /* split-http-req */
 			if (!strcmp(optarg, "method"))
 				params.split_http_req = split_method;
 			else if (!strcmp(optarg, "host"))
@@ -644,7 +681,7 @@ void parse_params(int argc, char *argv[])
 				exit_clean(1);
 			}
 			break;
-		case 12: /* split-pos */
+		case 15: /* split-pos */
 			i = atoi(optarg);
 			if (i)
 				params.split_pos = i;
@@ -654,25 +691,25 @@ void parse_params(int argc, char *argv[])
 				exit_clean(1);
 			}
 			break;
-		case 13: /* methodspace */
+		case 16: /* methodspace */
 			params.methodspace = true;
 			break;
-		case 14: /* methodeol */
+		case 17: /* methodeol */
 			params.methodeol = true;
 			break;
-		case 15: /* hosttab */
+		case 18: /* hosttab */
 			params.hosttab = true;
 			break;
-		case 16: /* unixeol */
+		case 19: /* unixeol */
 			params.unixeol = true;
 			break;
-		case 17: /* hostlist */
+		case 20: /* hostlist */
 			if (!LoadHostList(&params.hostlist, optarg))
 				exit_clean(1);
 			strncpy(params.hostfile,optarg,sizeof(params.hostfile));
 			params.hostfile[sizeof(params.hostfile)-1]='\0';
 			break;
-		case 18: /* pidfile */
+		case 21: /* pidfile */
 			strncpy(params.pidfile,optarg,sizeof(params.pidfile));
 			params.pidfile[sizeof(params.pidfile)-1]='\0';
 			break;
@@ -748,24 +785,37 @@ int main(int argc, char *argv[]) {
 	int r;
 	struct sockaddr_storage salisten;
 	socklen_t salisten_len;
-	int ipv6_only;
+	int ipv6_only=0,if_index6=0;
 
 	parse_params(argc, argv);
 
 	memset(&salisten, 0, sizeof(salisten));
+	if (*params.bindiface4)
+	{
+		if (!if_nametoindex(params.bindiface4))
+		{
+			printf("bad iface %s\n",params.bindiface4);
+			goto exiterr;
+		}
+	}
+	if (*params.bindiface6)
+	{
+		if_index6 = if_nametoindex(params.bindiface6);
+		if (!if_index6)
+		{
+			printf("bad iface %s\n",params.bindiface6);
+			goto exiterr;
+		}
+	}
 	if (*params.bindaddr)
 	{
 		if (inet_pton(AF_INET, params.bindaddr, &((struct sockaddr_in*)&salisten)->sin_addr))
 		{
 			salisten.ss_family = AF_INET;
-			((struct sockaddr_in*)&salisten)->sin_port = htons(params.port);
-			salisten_len = sizeof(struct sockaddr_in);
 		}
 		else if (inet_pton(AF_INET6, params.bindaddr, &((struct sockaddr_in6*)&salisten)->sin6_addr))
 		{
 			salisten.ss_family = AF_INET6;
-			((struct sockaddr_in6*)&salisten)->sin6_port = htons(params.port);
-			salisten_len = sizeof(struct sockaddr_in6);
 			ipv6_only = 1;
 		}
 		else
@@ -775,13 +825,85 @@ int main(int argc, char *argv[]) {
 		}
 	}
 	else
+	{
+		if (*params.bindiface4 || *params.bindiface6 || params.bindll)
+		{
+			struct ifaddrs *addrs,*a;
+			bool found=0;
+    
+			if (getifaddrs(&addrs)<0)
+			{
+				printf("getifaddrs failed\n");
+				goto exiterr;
+			}
+
+			for (;;)
+			{
+				a  = addrs;
+				while (a)
+				{
+					if (a->ifa_addr)
+					{
+						if (a->ifa_addr->sa_family==AF_INET &&
+						    *params.bindiface4 && !strcmp(a->ifa_name, params.bindiface4))
+						{
+							salisten.ss_family = AF_INET;
+							memcpy(&((struct sockaddr_in*)&salisten)->sin_addr, &((struct sockaddr_in*)a->ifa_addr)->sin_addr, sizeof(struct in_addr));
+							found=1;
+							break;
+						}
+						// ipv6 links locals are fe80::/10
+						else if (a->ifa_addr->sa_family==AF_INET6
+						          &&
+						         (!*params.bindiface6 && params.bindll ||
+						          *params.bindiface6 && !strcmp(a->ifa_name, params.bindiface6))
+						          &&
+							 (!params.bindll ||
+							  ((struct sockaddr_in6*)a->ifa_addr)->sin6_addr.s6_addr[0]==0xFE &&
+							  (((struct sockaddr_in6*)a->ifa_addr)->sin6_addr.s6_addr[1] & 0xC0)==0x80))
+						{
+							salisten.ss_family = AF_INET6;
+							memcpy(&((struct sockaddr_in6*)&salisten)->sin6_addr, &((struct sockaddr_in6*)a->ifa_addr)->sin6_addr, sizeof(struct in6_addr));
+							if_index6 = if_nametoindex(a->ifa_name);
+							ipv6_only = 1;
+							found=1;
+							break;
+						}
+					}
+					a = a->ifa_next;
+				}
+				if (!found && params.bindll && !params.bindll_force)
+				{
+					params.bindll=false;
+					// give it another try without bindll
+					continue;
+				}
+				break;
+			}
+			freeifaddrs(addrs);
+			if (!found)
+			{
+				printf("suitable ip address not found\n");
+				goto exiterr;
+			}
+		}
+		else
 		{
 			salisten.ss_family = AF_INET6;
-		((struct sockaddr_in6*)&salisten)->sin6_port = htons(params.port);
-		salisten_len = sizeof(struct sockaddr_in6);
-		ipv6_only = 0;
 			// leave sin6_addr zero
 		}
+	}
+	if (salisten.ss_family == AF_INET6)
+	{
+		salisten_len = sizeof(struct sockaddr_in6);
+		((struct sockaddr_in6*)&salisten)->sin6_port = htons(params.port);
+		((struct sockaddr_in6*)&salisten)->sin6_scope_id = if_index6;
+	}
+	else
+	{
+		salisten_len = sizeof(struct sockaddr_in);
+		((struct sockaddr_in*)&salisten)->sin_port = htons(params.port);
+	}
 
 	if (params.daemon) daemonize();
 

uninstall_easy.sh

@@ -125,6 +125,7 @@ remove_systemd()
 
 openwrt_fw_section_find()
 {
+	# $1 - fw include postfix
 	# echoes section number
 	
 	i=0
@@ -132,9 +133,8 @@ openwrt_fw_section_find()
 	do
 		path=$(uci -q get firewall.@include[$i].path)
 		[ -n "$path" ] || break
-		[ "$path" == "$OPENWRT_FW_INCLUDE" ] && {
+		[ "$path" == "$OPENWRT_FW_INCLUDE$1" ] && {
 	 		echo $i
-		 	true
 	 		return
 		}
 		i=$(($i+1))
@@ -144,9 +144,12 @@ openwrt_fw_section_find()
 }
 openwrt_fw_section_del()
 {
-	local id=$(openwrt_fw_section_find)
+	# $1 - fw include postfix
+
+	local id=$(openwrt_fw_section_find $1)
 	[ -n "$id" ] && {
 		uci delete firewall.@include[$id] && uci commit firewall
+		rm -f "$OPENWRT_FW_INCLUDE$1"
 	}
 }
 
@@ -155,7 +158,7 @@ remove_openwrt_firewall()
 	echo \* removing firewall script
 	
 	openwrt_fw_section_del
-	rm -f "$OPENWRT_FW_INCLUDE"
+	openwrt_fw_section_del 6
 }
 
 restart_openwrt_firewall()