The commit removes the SteamCMD login credentials from the default configuration file for Counter-Strike 2 server. Valve has removed the login requirement for cs2
* feat: update unsupprted distros and add comments to info_distro
* remove tmux 1.6 code
* add java and tmux version and change ram to int
* tidy up ram requirements
used data gathered from analytics
* feat(vhserver): added additional config string for valheim world modifiers
* added instructions on how modifiers are stored in the save files and how to go back to default
* small typo
---------
Co-authored-by: Daniel Gibbs <[email protected]>
When using "ansi"="off", the escape sequence \033[K is still present and tools that input from lgsm will get thoses bytes.
This commit removes that.
One side-effect if two prints are done without a line feed and the second is shorter than the first, then some unwanted character could remain.
```
echo -en "${creeol}foo/bar"
echo -en "${creeol}foo"
```
* before : prints "foo"
* after: prints "foo/bar"
* cs2
* config
* fix: remove lo code
* config
* params
* source2
* game info
* messages
* config changes
* dirs
* config
* refactor: refactor info message functions in alert.sh, command_details.sh, command_dev_query_raw.sh, and command_postdetails.sh
- Refactored the info message functions in multiple files to have consistent naming conventions.
- Renamed fn_info_message_* functions to fn_info_messages_* for clarity and consistency.
- Updated function calls accordingly.
* refactor: remove unnecessary code duplication in info_game.sh
The commit removes duplicated code for retrieving server information from the game configuration file. Specifically, it removes redundant lines related to rconpassword, rconport, and serverpassword. This improves code readability and maintainability.
* cs2
* cs2
* cs2 icon
* remove lo
* remove file
* remove lo
* update url
* ignore games with no configs
* remove configs from games that have non
* details check fix
* details check
* details check
* ignore systemdir check if running github actions
* fix name
The commit removes the Last Oasis game server configuration file `_default.cfg` and the corresponding module `fix_lo.sh`. These files are no longer needed as Last Oasis is being removed from the supported games list.
core_functsions.sh is no longer required
refactor: remove legacy code
A lot of time has passed on many of these changes. Moving old legacy code conversions
refactor: remove unused alert modules
This commit removes the unused alert modules `alert.sh`, `alert_discord.sh`, and `alert_email.sh`. These modules were not being used in the codebase and were therefore deleted.
- Updated the package dependencies in the Debian 12, Ubuntu 23.04, and Ubuntu 23.10 CSV files.
- Replaced "netcat" with "netcat-openbsd" as a dependency.
- Ensured consistency across different versions of Ubuntu.
This commit refactors the code by updating the package dependencies for Debian and Ubuntu distributions. The changes include replacing "netcat" with "netcat-openbsd" as a dependency in all three CSV files (Debian 12, Ubuntu 23.04, and Ubuntu 23.10). These updates ensure consistency across different versions of Ubuntu.
* feat(alert): add new alert types
- Added new alert types for different scenarios such as stopped, started, restarted, monitor session failure, monitor query failure, wipe, and info.
- Updated the `alert.sh` script to include functions for each new alert type.
- Modified the `command_monitor.sh` script to use the appropriate alert type based on the monitoring results.
* feat: remove more info if not enabled
* refactor: refactor alert functions and add color codes
This commit refactors the alert functions in the `alert.sh` module. It adds color codes for different types of alerts, such as green for started/restarted alerts, red for stopped/monitor session/query/permissions alerts, and blue for update/config/wipe/info alerts. The commit also updates the alert emoji to better represent each type of alert.
* feat: add colour to discord alert
* refactor: improve Pushbullet alert sending
The code in the `alert_pushbullet.sh` file has been refactored to improve the way Pushbullet alerts are sent. The curl command now includes the access token as a header instead of in the URL, resulting in more secure communication with the Pushbullet API. This change enhances the reliability and security of sending Pushbullet alerts.
* feat: add alert icon and footer to Discord alerts
- Added a new variable `alerticon` to store the URL of the alert icon image.
- Included the `alerticon` in the JSON payload for both short info and no info alerts.
- Added a footer with text "Sent by LinuxGSM v23.5.3" to the JSON payload for both short info and no info alerts.
This commit enhances the appearance of Discord alerts by adding an icon, a footer, and additional information about the sender.
* refactor(alert): refactor alert functions
- Refactored the alert functions to improve code readability and maintainability.
- Renamed variables for better clarity and consistency.
- Updated function names to be more descriptive of their purpose.
- Reorganized the order of function definitions for better organization.
* feat: add first batch of icons
* refactor: improve serverlist validation script
The commit refactors the serverlist validation script to include a new check. It now compares all game servers listed in `serverlist.csv` to `$shortname-icon.png` files in `lgsm/data/gameicons`. If a game server is listed in `serverlist.csv`, it should have a corresponding `$shortname-icon.png` file. The commit adds a loop that checks for the existence of these files and outputs an error message if any are missing.
* another batch of icons
* more icons
* updated icons
a
* feat: add serverlist game icon validation
This commit adds a new script `serverlist-validate-game-icons.sh` that checks if all the game servers listed in `serverlist.csv` have a corresponding `shortname-icon.png` file. It also verifies that the number of game icons matches the number of servers in `serverlist.csv`. The script is executed as part of the workflow defined in `serverlist-validate.yml`.
Co-authored-by: [co-author-name]
* refactor: improve game icon validation script
The commit refactors the game icon validation script to improve its functionality. It adds a check for unexpected game icons and ensures that the number of game icons matches the number of servers in serverlist.csv. The commit also updates error messages for better clarity and readability.
* refactor: remove unused mumble-icon.png game icon
The code changes involve removing the unused mumble-icon.png game icon. This change helps to clean up the codebase by removing unnecessary files.
* feat: update game icons
Updated the game icons for bf1942, pmc, vints, vpmc, and wmc. Changed resolution to 32px
* feat(alert): add alert action and information to Discord message
- Added a new variable `alertaction` to store the action performed in the alert
- Modified the Discord message template to include the alert action and information
- Updated the author name in the Discord message template to "LinuxGSM Alert"
The changes allow for more informative and descriptive alerts in Discord messages.
* feat(alert.sh): add alertaction variable
This commit adds the `alertaction` variable to the `fn_alert_*` functions in the `alert.sh` module. The `alertaction` variable is used to specify the action that triggered the alert, such as "Started", "Stopped", "Restarted", etc. This allows for more informative and descriptive alerts.
* refactor: rework email alert
* feat: add environment detail
* refactor: simplify Discord and Pushbullet alert message handling
The code changes in this commit refactor the way Discord and Pushbullet alert messages are handled. The previous implementation used separate variables for short information and no information scenarios, but now it uses a single variable for both cases. Additionally, the code now checks if the "alerturl" is empty instead of comparing it to a specific value.
These changes improve code readability and maintainability by reducing redundancy and simplifying conditional logic.
* title
* fix: update Pushover alert message formatting
The commit fixes the formatting of the Pushover alert message by removing unnecessary information and adding a conditional check for the presence of an alert URL.
* refactor: improve formatting of server IP value in Discord alert
The code changes in this commit refactor the formatting of the server IP value in the Discord alert. The value is now enclosed in single quotes for better readability.
* refactor: improve alert message formatting and remove unnecessary code
The commit refactors the alert message formatting in the `alert_pushbullet.sh`, `alert_slack.sh`, and `alert_telegram.sh` files. It improves the structure and readability of the messages by using proper markdown syntax. Additionally, it removes unnecessary code from the files to simplify their implementation.
* more changes
* feat: add server name and information fields to Discord alert
The code changes in the `alert_discord.sh` file include adding new fields for server name and information to the JSON payload sent in a Discord alert. This allows for more detailed information about the server to be included in the alert message.
refactor: improve conditional logic for Gotify alerts
In the `alert_gotify.sh` file, the code changes involve improving the conditional logic for determining which JSON payload to use when sending a Gotify alert. The updated logic checks if an alert URL is provided and selects the appropriate JSON payload accordingly.
chore: update field names in IFTTT alerts
The changes made in `alert_ifttt.sh` involve updating field names in the JSON payloads used for IFTTT alerts. The field names have been modified to match a consistent format across all fields.
fix: correct body formatting in Pushbullet alerts
The code changes made in `alert_pushbullet.sh` address an issue with incorrect body formatting in Pushbullet alerts. The body of the alert now includes separate lines for each piece of information, such as server name, information, game, server IP, hostname, and more info.
refactor: improve attachment structure in RocketChat alerts
In `alert_rocketchat.sh`, the code changes involve improving the attachment structure of RocketChat alerts. The updated structure includes separate sections for server name, information, game, server IP, hostname, and more info.
feat: add additional sections to Slack alerts
The changes made in `alert_slack.sh` include adding additional sections to Slack alerts. These sections provide separate blocks of text for server name and information within each message.
feat: add HTML formatting to Telegram alerts
In `alert_telegram.sh`, HTML formatting has been added to Telegram alerts. This allows for bold text styling and clickable links within each message sent via Telegram.
* bug
* bug
* refactor: improve alert message formatting
- Refactored the code in `alert_pushover.sh` and `alert_telegram.sh` to improve the formatting of the alert messages.
- Updated the message structure to include the server name before other information.
- Added line breaks for better readability.
- Made sure that all variables are properly interpolated within the messages.
* bug
* remove rocketchattoken
* feat: add alert types for server start, stop, restart, and wipe
- Added new alert types for server start, stop, restart, and wipe.
- Updated the `alert.sh` module to include functions for handling these new alert types.
- Modified the `command_start.sh`, `command_stop.sh`, and `command_wipe.sh` modules to trigger the corresponding alerts when appropriate.
- Updated the `alert_rocketchat.sh` module to display the relevant information for each alert type in Rocket.Chat notifications.
* refactor: update alert messages in lgsm/modules/alert.sh
- Updated the alert messages for when the game server is stopped, started, restarted, and when an LinuxGSM update is received.
- Changed the wording to use "has been" instead of "has" for consistency.
- Added a mention that the server has been restarted after receiving an LinuxGSM update.
* bug
* refactor: update alert emojis and add server time
- Updated the alert emojis in the `alert.sh` module.
- Added the server time to the alert messages in various modules (`alert_discord.sh`, `alert_gotify.sh`, `alert_ifttt.sh`, `alert_pushbullet.sh`, `alert_pushover.sh`, `alert_rocketchat.sh`, and `alert_slack.sh`).
* refactor: remove date from alert messages
The commit refactors the code in `alert_discord.sh` and `alert_slack.sh` to remove the date from the alert messages sent by LinuxGSM. This change simplifies the message content while still indicating that it was sent by LinuxGSM and includes the version number.
* feat: add statusalert option to server configs
This commit adds the "statusalert" option to the default configuration files for various game servers. The "statusalert" option allows users to enable or disable alerts on server start, stop, and restart events. This feature provides more flexibility in managing server notifications.
* feat: add alert for update and restart if necessary
The code change adds an alert for updates and restarts the service if necessary. This ensures that the service is restarted after an update to prevent any issues.
* feat: add backup alert functionality
This commit adds a new function `fn_alert_backup` to the `alert.sh` module. This function sends an alert when the system has been backed up. The alert includes a message, action, emoji, sound, and color.
In addition, this commit modifies the `command_backup.sh` module to trigger the backup alert by setting the variable `alert` to "backup" and calling `alert.sh`.
The purpose of these changes is to provide notifications when backups are created.
Co-authored-by: AI Assistant <[email protected]>
* refactor: change alert color to green
The code in the `alert.sh` file has been refactored to change the alert color from blue to green. This change updates the `alertcolourhex` and `alertcolourdec` variables accordingly.
---------
Co-authored-by: AI Assistant <[email protected]>
* refactor: simplify sleep time functions
The `fn_sleep_time` function has been refactored to remove unnecessary conditions and set a default sleep time of 0.5 seconds. Additionally, four new functions (`fn_sleep_time_1`, `fn_sleep_time_5`, `fn_sleep_time_10`) have been added to provide different sleep times of 1, 5, and 10 seconds respectively. This improves code readability and allows for more flexibility in setting sleep times.
* change sleep to fn_sleep_time
* refactor: optimize sleep time functions
- Refactored the code to optimize the sleep time functions.
- Updated the `fn_sleep_time` function calls to `fn_sleep_time_1` in multiple files.
- Removed unnecessary sleep time calls in some files.
* refactor: simplify sleep time function call
The code changes refactor the sleep time function call in the check_deps.sh file. Instead of calling fn_sleep_time_1, it now calls fn_sleep_time. This change simplifies the code and improves readability.
* feat: add sleep time before checking session
Add a sleep time of 1 second before checking the session in the command_monitor.sh file. This allows for better synchronization and improves the accuracy of the session check.
* changes
* refactor: optimize sleep time function
The code changes refactor the sleep time function in multiple files to improve efficiency. The fn_sleep_time function is replaced with fn_sleep_time_1. This change reduces unnecessary delays during execution.
* refactor: update sleep time function names
The sleep time functions in the core_messages.sh file have been updated to use more descriptive names. The fn_sleep_time function has been renamed to fn_sleep_time_1 for clarity and consistency. This change improves code readability and maintainability.
* refactor: optimize sleep time in core_messages.sh
The commit optimizes the sleep time in the core_messages.sh file. The fn_sleep_time and fn_print_dots functions now use a shorter sleep time of 0.5 seconds instead of 1 second, resulting in faster execution.
* refactor: improve readability and consistency in code
- Refactored the log messages to use consistent capitalization and wording.
- Updated log messages in check_glibc.sh, check_permissions.sh, command_backup.sh, command_update_linuxgsm.sh, command_wipe.sh, fix_samp.sh, install_config.sh, and set_dst_config_vars() functions.
feat: add more descriptive log messages
- Added more descriptive log messages to provide clearer information about the actions being performed.
- Updated log messages in check_glibc.sh, check_permissions.sh, command_backup.sh, command_update_linuxgsm.sh, command_wipe.sh, fix_samp.sh, install_config.sh.
fix: correct spelling errors in log messages
- Corrected spelling errors in some of the log messages for better clarity.
- Updated log messages in check_glibc.sh and fix_samp.sh.
* refactor: remove unnecessary print statements
This commit refactors the code by removing unnecessary print statements in multiple files. The removed print statements were used for displaying dots and warnings, but they are not needed anymore. This improves the readability and cleanliness of the code.
* refactor: improve commit messages for code changes
- Refactored check_glibc.sh to improve readability and clarity of error messages.
- Refactored check_permissions.sh to provide more informative error messages when checking /sys permissions.
- Refactored check_system_requirements.sh to provide clearer warning message when checking RAM requirements.
- Refactored command_backup.sh to provide more descriptive messages when starting a backup.
* remove legacy code
* fix: remove \t
* fix: run check_root
check root was never running because of logic in linuxgsm.sh
* fix: update warning message for missing sudo access
The warning message for users without sudo access has been updated to provide clearer instructions. Instead of just suggesting manual installation, it now also suggests running the script as root using `./${selfname} install`. This change improves user experience and helps them resolve dependency installation issues more effectively.
* tidy
* refactor: improve retrieval and handling of public IP address
The code in `info_game.sh` has been refactored to enhance the process of retrieving and handling the public IP address. The changes include:
- Using the API endpoint `http://ip-api.com/json/` instead of `https://api.ipify.org`
- Storing the retrieved data in `publicip.txt`
- Extracting additional information such as country and country code using `jq`
These improvements aim to provide more accurate and detailed information about the public IP address.
* refactor: update API URL and set default values for public IP, country, and country code
The commit refactors the code by updating the API URL to remove a trailing slash. Additionally, it sets default values for the variables `publicip`, `country`, and `countrycode` when the file `${tmpdir}/publicip.txt` is not found.
* feat: cache and retrieve public IP address
This commit adds functionality to cache the public IP address for 24 hours. If the cached IP address is older than 24 hours or doesn't exist, a new request is made to retrieve the public IP address. The retrieved IP address is then stored in a file for future use. Additionally, if there are any errors during the retrieval process, appropriate warning messages are logged and default values are set for the IP address, country, and country code.
Co-authored-by: AI Assistant <[email protected]>
* feat: cache and retrieve public IP address
This commit adds functionality to cache the public IP address for 24 hours. If the cached IP address is older than 24 hours or doesn't exist, a new request is made to retrieve the public IP address. The retrieved IP address is then stored in a file for future use. Additionally, if there are any errors during the retrieval process, appropriate warning messages are logged and default values are set for the IP address, country, and country code.
* refactor: improve caching and logging of public IP address
The code has been refactored to use a JSON file instead of a text file for caching the public IP address. The log messages have also been updated to provide more informative output.
* refactor(info_messages): Remove Mailgun alert
This commit refactors the `info_messages.sh` module by removing the Mailgun (email) alert functionality. The code changes remove the corresponding section that displays the Mailgun alert status in the info message script. This change simplifies and streamlines the code by eliminating unused functionality.
---------
Co-authored-by: AI Assistant <[email protected]>
* refactor: remove unnecessary comments in default server configurations
The commit removes unnecessary comments from the default server configurations. The comments were providing instructions to edit the configuration files with care, but they are not needed and can be safely removed.
* refactor: update server names in default configuration files
- Updated the servername value in multiple default configuration files to "LinuxGSM" for consistency.
- Refactored the code to reflect the changes made.
* refactor: rename fn_script_log_fatal to fn_script_log_faail
to create more consistency with naming
* feat: improve console output formatting
- Added separator function to improve readability of console output.
- Replaced multiple instances of manual separators with the new function.
- Updated commit message to follow conventional commit standard.
* refactor: remove unnecessary fn_sleep_time calls
This commit removes the fn_sleep_time function calls that are no longer needed in multiple modules. The fn_sleep_time function was used to introduce a delay, but it is no longer necessary for the current implementation.
* better standardise random
* removed bold where not required
The code change modifies the tail command in the fn_info_logs function to exclude lines containing "==>". This improves the display of log files by filtering out unnecessary information.
Add a curl command to query the Steam Master Server for server addresses. This allows retrieving server information using the GetServersAtAddress API endpoint provided by Steam.
- Updated the IP and port settings for ckserver, colserver, fctrserver, hwserver, ohdserver, rustserver, and untserver.
- Added a link to the documentation for predefined parameters in ckserver and hwserver.
- Modified the startparameters value in colserver to include additional parameters.
- Changed the branch value in fctrserver to "stable".
- Updated the servername value in hwserver and ohdserver to "LinuxGSM".
- Modified the defaultmap value in hwserver to "nullius".
- Removed optional comments from hwerver regarding defaultmap and creativemode values.
- Updated gamemode values in rusterver and untserer with their respective options.
* refactor: shorten module update function names
The commit renames the update functions for several game modules to shorter names. The new names are more concise and easier to remember, which should improve code readability and maintainability.
* feat: Add Update Check workflow
This commit adds a new GitHub Actions workflow that checks if LinuxGSM is picking up game server config and parameter variables. The workflow runs on push and manual triggers, with concurrency settings to cancel in-progress jobs. It downloads linuxgsm.sh, installs dependencies, grabs the server, enables developer mode, installs the server, and updates it.
* feat: Add concurrency group names to workflows
The `details-check.yml` and `update-check.yml` workflows now have a concurrency group name that includes the branch or tag name. This will allow for better management of concurrent workflow runs.
* refactor: Update script names for Minecraft, Factorio, Jedi Knight 2 and Vintage Story
This commit updates the script names for Minecraft, Factorio, Jedi Knight 2 and Vintage Story. The update includes changes to command_check_update.sh, command_update.sh, core_functions.sh and install_server_files.sh. The new script names are update_mc.sh (formerly update_minecraft.sh), update_fctr.sh (formerly update_factorio.sh), update_jk2.sh (formerly update_jediknight2.sh) and update_vints.sh (formerly update_vintagestory.sh).
* feat: Add support for 32-bit architecture
This commit adds support for 32-bit architecture by running the command "sudo dpkg --add-architecture i386" instead of installing libxml2-utils and jq.
* feat: Add i386 architecture and install libstdc++6
This commit adds the installation of libstdc++6:i386 package to support 32-bit applications. It also includes adding the i386 architecture to dpkg.
* feat: Update dependencies for LinuxGSM
Changed the dependency from libstdc++6:i386 to libgcc-s1:i386 in the update-check.yml file. This change was made to ensure compatibility with newer versions of LinuxGSM.
* feat: Add update and force-update server functionality
This commit adds the ability to check for updates and force updates on a server. The update-check.yml file has been modified to include new jobs that run the LGSM_GITHUBBRANCH command with specific arguments.
* feat: Add dependencies for server installation
This commit adds the necessary dependencies to install a game server. The `update-check.yml` file has been updated to include the installation of `bsdmainutils`, `libsdl2-2.0-0:i386`, `libtinfo5:i386`, and `steamcmd`.
* steamcmd only
* steamcmd
* test
* test
* refactor: improve random password generation in install_config.sh
The code change refactors the random password generation in the `install_config.sh` file. Instead of using `tr -dc A-Za-z0-9_ < /dev/urandom | head -c 8 | xargs`, it now uses `tr -dc 'A-Za-z0-9_' < /dev/urandom 2>/dev/null | head -c 8 | xargs`. This change improves the reliability and security of generating random passwords.
* refactor: remove redundant code and set default branch
The commit refactors the code by removing redundant code that sets the branch to "public" if no custom branch is specified. This change simplifies the logic and improves readability.
* test
* fix: fix steamcmd build version retrieval
The code changes in this commit fix an issue with retrieving the build version from SteamCMD. The previous implementation was not correctly capturing the buildid. This has been resolved by adding additional echo statements for debugging purposes.
* test
fix: remove unnecessary app_info_print command
The commit removes the unnecessary `app_info_print` command from the code. This command was not needed to check the buildid.
* fix: GitHub Actions test failure
The code change fixes a failing GitHub Actions test by running SteamCMD twice. The first run is to update the app info, and the second run retrieves the build ID for the specified branch.
* Add steam user and password secret for jk2
* refactor: update steamuser and steampass paths in jk2server config
The code changes refactor the paths for `steamuser` and `steampass` in the configuration file of the `jk2server`. The previous paths were incorrect, so they have been updated to point to the correct location.
* refactor: update steamuser and steampass insertion in LGSM configuration
The code changes refactor the way steamuser and steampass are inserted into the LGSM configuration file. Instead of hardcoding the values, they are now dynamically inserted using environment variables. This improves flexibility and security when setting up the server.
* refactor: simplify steamuser and steampass insertion in update-check.yml
The code changes remove unnecessary sed commands and replace them with a single echo command to insert the values of STEAMCMD_USER and STEAMCMD_PASS into the common.cfg file. This simplifies the code and improves readability.
* feat: update steamuser and steampass in common.cfg
The commit updates the code to properly insert the `steamuser` and `steampass` values in the `common.cfg` file. The previous code was not correctly formatting the values, which caused issues with server installation. This change ensures that the values are properly formatted using double quotes for `steamuser` and single quotes for `steampass`.
- Refactored the code to use `pgrep -fcx` instead of `pgrep -fc` for checking process counts.
- Updated print statements to provide more informative messages.
- Renamed some variables for clarity.
- Added newlines after printing information.
Daniel Gibbs
Renato
Pierre Payen
CosminPerRam