From c1e17138902cdbc2bb1ff0170e64c559add5bc8f Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" Date: Fri, 14 Mar 2025 11:32:26 +0000 Subject: [PATCH] Deployed a9a5133 to Pre-release with MkDocs 1.6.1 and mike 2.1.3 --- Pre-release/404.html | 24 +- Pre-release/advanced/api/index.html | 24 +- .../config/optional-config/index.html | 26 +- .../config/unattended-setup/index.html | 1314 +++++++++++++++++ .../advanced/metrics/prometheus/index.html | 26 +- .../advanced/migrate/from-14-to-15/index.html | 24 +- Pre-release/advanced/migrate/index.html | 24 +- Pre-release/contributing/general/index.html | 24 +- .../issues-and-pull-requests/index.html | 24 +- .../examples/tutorials/adguard/index.html | 24 +- .../tutorials/auto-updates/index.html | 24 +- .../tutorials/basic-installation/index.html | 24 +- .../examples/tutorials/caddy/index.html | 24 +- .../examples/tutorials/docker-run/index.html | 24 +- .../examples/tutorials/dockerless/index.html | 24 +- .../examples/tutorials/nginx/index.html | 24 +- .../examples/tutorials/podman/index.html | 24 +- .../examples/tutorials/traefik/index.html | 24 +- Pre-release/getting-started/index.html | 24 +- Pre-release/index.html | 24 +- Pre-release/search/search_index.json | 2 +- Pre-release/sitemap.xml | 40 +- Pre-release/sitemap.xml.gz | Bin 388 -> 400 bytes 23 files changed, 1776 insertions(+), 40 deletions(-) create mode 100644 Pre-release/advanced/config/unattended-setup/index.html diff --git a/Pre-release/404.html b/Pre-release/404.html index 3ee835a7..145159d7 100644 --- a/Pre-release/404.html +++ b/Pre-release/404.html @@ -16,7 +16,7 @@ - + @@ -515,6 +515,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/advanced/api/index.html b/Pre-release/advanced/api/index.html index b70bfe24..16093842 100644 --- a/Pre-release/advanced/api/index.html +++ b/Pre-release/advanced/api/index.html @@ -22,7 +22,7 @@ - + @@ -534,6 +534,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/advanced/config/optional-config/index.html b/Pre-release/advanced/config/optional-config/index.html index 24b63e3b..1a09ddf4 100644 --- a/Pre-release/advanced/config/optional-config/index.html +++ b/Pre-release/advanced/config/optional-config/index.html @@ -18,11 +18,11 @@ - + - + @@ -534,6 +534,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/advanced/config/unattended-setup/index.html b/Pre-release/advanced/config/unattended-setup/index.html new file mode 100644 index 00000000..63eaee1c --- /dev/null +++ b/Pre-release/advanced/config/unattended-setup/index.html @@ -0,0 +1,1314 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unattended Setup - wg-easy + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    + +
    +
    + +
    + + + + + + +
    + + +
    + +
    + + + + + + + + + +
    +
    + + + +
    +
    +
    + + + + + + + +
    +
    +
    + + + +
    +
    +
    + + + +
    +
    +
    + + + +
    +
    + + + + + + + + + + + + + + + + + + + + + +

    Unattended Setup

    + +

    If you want to run the setup without any user interaction, e.g. with a tool like Ansible, you can use these environment variables to configure the setup.

    +

    These will only be used during the first start of the container. After that, the setup will be disabled.

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    EnvExampleDescriptionGroup
    INIT_ENABLEDtrueEnables the below env vars0
    INIT_USERNAMEadminSets admin username1
    INIT_PASSWORDSe!ureP%sswSets admin password1
    INIT_HOSTvpn.example.comHost clients will connect to1
    INIT_PORT51820Port clients will connect to and wireguard will listen on1
    INIT_DNS1.1.1.1,8.8.8.8Sets global dns setting2
    INIT_IPV4_CIDR10.8.0.0/24Sets IPv4 cidr3
    INIT_IPV6_CIDR2001:0DB8::/32Sets IPv6 cidr3
    +
    +

     Variables have to be used together

    +

    If variables are in the same group, you have to set all of them. For example, if you set INIT_IPV4_CIDR, you also have to set INIT_IPV6_CIDR.

    +

    If you want to skip the setup process, you have to configure group 1

    +
    +
    +

    Security

    +

    The initial username and password is not checked for complexity. Make sure to set a long enough username and a secure password. Otherwise, the user won't be able to log in.

    +

    Its recommended to remove the variables after the setup is done to prevent the password from being exposed.

    +
    + + + + + + + + + + + + + + + + +
    +
    + + + +
    + + + +
    + +
    + +
    +
    +
    + +
    +

    © Wireguard Easy
    This project is licensed under AGPL-3.0-only.
    This project is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Jason A. Donenfeld, ZX2C4 or Edge Security
    "WireGuard" and the "WireGuard" logo are registered trademarks of Jason A. Donenfeld

    + +
    + + + Made with + + Material for MkDocs + + +
    + +
    +
    +
    + +
    +
    +
    +
    + + + + + + + + + + \ No newline at end of file diff --git a/Pre-release/advanced/metrics/prometheus/index.html b/Pre-release/advanced/metrics/prometheus/index.html index 02446f0d..c3c276b9 100644 --- a/Pre-release/advanced/metrics/prometheus/index.html +++ b/Pre-release/advanced/metrics/prometheus/index.html @@ -15,14 +15,14 @@ - + - + @@ -526,6 +526,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/advanced/migrate/from-14-to-15/index.html b/Pre-release/advanced/migrate/from-14-to-15/index.html index 78448a5a..4a9c6a15 100644 --- a/Pre-release/advanced/migrate/from-14-to-15/index.html +++ b/Pre-release/advanced/migrate/from-14-to-15/index.html @@ -22,7 +22,7 @@ - + @@ -531,6 +531,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/advanced/migrate/index.html b/Pre-release/advanced/migrate/index.html index da91f0c0..5a77936f 100644 --- a/Pre-release/advanced/migrate/index.html +++ b/Pre-release/advanced/migrate/index.html @@ -22,7 +22,7 @@ - + @@ -526,6 +526,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/contributing/general/index.html b/Pre-release/contributing/general/index.html index ce8717da..244dcf39 100644 --- a/Pre-release/contributing/general/index.html +++ b/Pre-release/contributing/general/index.html @@ -22,7 +22,7 @@ - + @@ -528,6 +528,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/contributing/issues-and-pull-requests/index.html b/Pre-release/contributing/issues-and-pull-requests/index.html index 05f0f45d..e3b23046 100644 --- a/Pre-release/contributing/issues-and-pull-requests/index.html +++ b/Pre-release/contributing/issues-and-pull-requests/index.html @@ -22,7 +22,7 @@ - + @@ -528,6 +528,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/adguard/index.html b/Pre-release/examples/tutorials/adguard/index.html index 26f8e870..05341925 100644 --- a/Pre-release/examples/tutorials/adguard/index.html +++ b/Pre-release/examples/tutorials/adguard/index.html @@ -22,7 +22,7 @@ - + @@ -525,6 +525,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/auto-updates/index.html b/Pre-release/examples/tutorials/auto-updates/index.html index db45e572..438692ca 100644 --- a/Pre-release/examples/tutorials/auto-updates/index.html +++ b/Pre-release/examples/tutorials/auto-updates/index.html @@ -22,7 +22,7 @@ - + @@ -530,6 +530,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/basic-installation/index.html b/Pre-release/examples/tutorials/basic-installation/index.html index 11cf3bb2..a6e4829b 100644 --- a/Pre-release/examples/tutorials/basic-installation/index.html +++ b/Pre-release/examples/tutorials/basic-installation/index.html @@ -22,7 +22,7 @@ - + @@ -530,6 +530,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/caddy/index.html b/Pre-release/examples/tutorials/caddy/index.html index 33753834..dc18ed37 100644 --- a/Pre-release/examples/tutorials/caddy/index.html +++ b/Pre-release/examples/tutorials/caddy/index.html @@ -22,7 +22,7 @@ - + @@ -525,6 +525,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/docker-run/index.html b/Pre-release/examples/tutorials/docker-run/index.html index ebc87a6f..f8d70b4d 100644 --- a/Pre-release/examples/tutorials/docker-run/index.html +++ b/Pre-release/examples/tutorials/docker-run/index.html @@ -22,7 +22,7 @@ - + @@ -525,6 +525,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/dockerless/index.html b/Pre-release/examples/tutorials/dockerless/index.html index a0b1fec3..78d5ed40 100644 --- a/Pre-release/examples/tutorials/dockerless/index.html +++ b/Pre-release/examples/tutorials/dockerless/index.html @@ -22,7 +22,7 @@ - + @@ -525,6 +525,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/nginx/index.html b/Pre-release/examples/tutorials/nginx/index.html index 31d5e2f6..64cff029 100644 --- a/Pre-release/examples/tutorials/nginx/index.html +++ b/Pre-release/examples/tutorials/nginx/index.html @@ -22,7 +22,7 @@ - + @@ -525,6 +525,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/podman/index.html b/Pre-release/examples/tutorials/podman/index.html index 57a74a56..5699265a 100644 --- a/Pre-release/examples/tutorials/podman/index.html +++ b/Pre-release/examples/tutorials/podman/index.html @@ -22,7 +22,7 @@ - + @@ -530,6 +530,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/examples/tutorials/traefik/index.html b/Pre-release/examples/tutorials/traefik/index.html index caa19daa..4669c8e0 100644 --- a/Pre-release/examples/tutorials/traefik/index.html +++ b/Pre-release/examples/tutorials/traefik/index.html @@ -20,7 +20,7 @@ - + @@ -523,6 +523,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/getting-started/index.html b/Pre-release/getting-started/index.html index 57352263..3c53a679 100644 --- a/Pre-release/getting-started/index.html +++ b/Pre-release/getting-started/index.html @@ -22,7 +22,7 @@ - + @@ -651,6 +651,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/index.html b/Pre-release/index.html index f0853d01..f7146dc4 100644 --- a/Pre-release/index.html +++ b/Pre-release/index.html @@ -20,7 +20,7 @@ - + @@ -620,6 +620,28 @@ + + + + + + +
  • + + + + + Unattended Setup + + + + + +
    • + + + + diff --git a/Pre-release/search/search_index.json b/Pre-release/search/search_index.json index 60a001c5..3ca5ae4a 100644 --- a/Pre-release/search/search_index.json +++ b/Pre-release/search/search_index.json @@ -1 +1 @@ -{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"Welcome to the Documentation for wg-easy","text":"

    \u00a0This Documentation is Versioned

    Make sure to select the correct version of this documentation! It should match the version of the image you are using. The default version corresponds to the :latest image tag - the most recent stable release.

    This documentation provides you not only with the basic setup and configuration of wg-easy but also with advanced configuration, elaborate usage scenarios, detailed examples, hints and more.

    "},{"location":"#about","title":"About","text":"

    wg-easy is the easiest way to run WireGuard VPN + Web-based Admin UI.

    "},{"location":"#contents","title":"Contents","text":""},{"location":"#getting-started","title":"Getting Started","text":"

    If you're new to wg-easy, make sure to read the Getting Started chapter first. If you want to look at examples for Docker Run and Compose, we have an Examples page.

    "},{"location":"#contributing","title":"Contributing","text":"

    We are always happy to welcome new contributors. For guidelines and entrypoints please have a look at the Contributing section.

    "},{"location":"#migration","title":"Migration","text":"

    If you are migrating from an older version of wg-easy, please read the Migration chapter.

    "},{"location":"getting-started/","title":"Getting Started","text":"

    This page explains how to get started with wg-easy. The guide uses Docker Compose as a reference. In our examples, we mount the named volume etc_wireguard to /etc/wireguard inside the container.

    "},{"location":"getting-started/#preliminary-steps","title":"Preliminary Steps","text":"

    Before you can get started with deploying your own VPN, there are some requirements to be met:

    1. You need to have a host that you can manage
    2. You need to have a domain name or a public IP address
    3. You need a supported architecture (x86_64, arm64)
    "},{"location":"getting-started/#host-setup","title":"Host Setup","text":"

    There are a few requirements for a suitable host system:

    1. You need to have a container runtime installed

    About the Container Runtime

    On the host, you need to have a suitable container runtime (like Docker or Podman) installed. We assume Docker Compose is installed. We have aligned file names and configuration conventions with the latest Docker Compose specification. If you're using podman, make sure to read the related documentation.

    "},{"location":"getting-started/#deploying-the-actual-image","title":"Deploying the Actual Image","text":""},{"location":"getting-started/#tagging-convention","title":"Tagging Convention","text":"

    To understand which tags you should use, read this section carefully. Our CI will automatically build, test and push new images to the following container registry:

    1. GitHub Container Registry (ghcr.io/wg-easy/wg-easy)

    All workflows are using the tagging convention listed below. It is subsequently applied to all images.

    Event Image Tags cron on master nightly push a tag (v1.2.3) 1.2.3, 1.2, 1, latest

    When publishing a tag we follow the Semantic Versioning specification. The latest tag is always pointing to the latest stable release. If you want to avoid breaking changes, use the major version tag (e.g. 15).

    "},{"location":"getting-started/#get-all-files","title":"Get All Files","text":"

    Issue the following command to acquire the necessary file:

    wget \"https://raw.githubusercontent.com/wg-easy/wg-easy/master/docker-compose.yml\"\n
    "},{"location":"getting-started/#start-the-container","title":"Start the Container","text":"

    To start the container, issue the following command:

    sudo docker compose up -d\n
    "},{"location":"getting-started/#configuration-steps","title":"Configuration Steps","text":"

    Now follow the setup process in your web browser

    "},{"location":"getting-started/#stopping-the-container","title":"Stopping the Container","text":"

    To stop the container, issue the following command:

    sudo docker compose down\n

    Using the Correct Commands For Stopping and Starting wg-easy

    Use sudo docker compose up / down, not sudo docker compose start / stop. Otherwise, the container is not properly destroyed and you may experience problems during startup because of inconsistent state.

    That's it! It really is that easy.

    If you need more help you can read the Basic Installation Tutorial.

    "},{"location":"advanced/api/","title":"API","text":"

    TODO

    "},{"location":"advanced/config/optional-config/","title":"Optional Configuration","text":"

    TODO

    Env Default Example Description PORT 51821 6789 TCP port for Web UI. HOST 0.0.0.0 localhost IP address web UI binds to. INSECURE false true If access over http is allowed"},{"location":"advanced/metrics/prometheus/","title":"Prometheus","text":"

    TODO

    "},{"location":"advanced/migrate/","title":"Migrate","text":"

    If you want to migrate from an older version of wg-easy to the new version, you can find the migration guides listed below.

    "},{"location":"advanced/migrate/from-14-to-15/","title":"Migrate from v14 to v15","text":"

    This guide will help you migrate from v14 to version v15 of wg-easy.

    "},{"location":"advanced/migrate/from-14-to-15/#changes","title":"Changes","text":""},{"location":"advanced/migrate/from-14-to-15/#migration","title":"Migration","text":""},{"location":"advanced/migrate/from-14-to-15/#backup","title":"Backup","text":"

    Before you start the migration, make sure to backup your existing configuration files.

    Go into the Web Ui and click the Backup button, this should download a wg0.json file.

    Or download the wg0.json file from your container volume to your pc.

    You will need this file for the migration

    "},{"location":"advanced/migrate/from-14-to-15/#remove-old-container","title":"Remove old container","text":"
    1. Stop the running container

    If you are using docker run

    docker stop wg-easy\n

    If you are using docker-compose

    docker-compose down\n
    "},{"location":"advanced/migrate/from-14-to-15/#start-new-container","title":"Start new container","text":"

    Follow the instructions in the Getting Started or Basic Installation guide to start the new container.

    In the setup wizard, select that you already already have a configuration file and upload the wg0.json file you downloaded in the backup step.

    "},{"location":"advanced/migrate/from-14-to-15/#done","title":"Done","text":"

    You have now successfully migrated to v15 of wg-easy.

    "},{"location":"contributing/general/","title":"General Information","text":""},{"location":"contributing/general/#coding-style","title":"Coding Style","text":"

    When refactoring, writing or altering files, adhere to these rules:

    1. Adjust your style of coding to the style that is already present! Even if you do not like it, this is due to consistency. There was a lot of work involved in making all files consistent.
    2. Use pnpm lint to check your scripts! Your contributions are checked by GitHub Actions too, so you will need to do this.
    3. Use the provided .vscode/settings.json file.
    "},{"location":"contributing/general/#documentation","title":"Documentation","text":"

    Make sure to select nightly in the dropdown menu at the top. Navigate to the page you would like to edit and click the edit button in the top right. This allows you to make changes and create a pull-request.

    Alternatively you can make the changes locally. For that you'll need to have Docker installed. Run

    pnpm docs:serve\n

    This serves the documentation on your local machine on port 8080. Each change will be hot-reloaded onto the page you view, just edit, save and look at the result.

    "},{"location":"contributing/issues-and-pull-requests/","title":"Issues and Pull Requests","text":"

    This project is Open Source. That means that you can contribute on enhancements, bug fixing or improving the documentation.

    "},{"location":"contributing/issues-and-pull-requests/#opening-an-issue","title":"Opening an Issue","text":"

    Attention

    Before opening an issue, read the README carefully, study the docs for your version (maybe latest) and your search engine you trust. The issue tracker is not meant to be used for unrelated questions!

    When opening an issue, please provide details use case to let the community reproduce your problem.

    Attention

    Use the issue templates to provide the necessary information. Issues which do not use these templates are not worked on and closed.

    By raising issues, I agree to these terms and I understand, that the rules set for the issue tracker will help both maintainers as well as everyone to find a solution.

    Maintainers take the time to improve on this project and help by solving issues together. It is therefore expected from others to make an effort and comply with the rules.

    "},{"location":"contributing/issues-and-pull-requests/#filing-a-bug-report","title":"Filing a Bug Report","text":"

    Thank you for participating in this project and reporting a bug. wg-easy is a community-driven project, and each contribution counts!

    Maintainers and moderators are volunteers. We greatly appreciate reports that take the time to provide detailed information via the template, enabling us to help you in the best and quickest way. Ignoring the template provided may seem easier, but discourages receiving any support (via assignment of the label meta/no template - no support).

    Markdown formatting can be used in almost all text fields (unless stated otherwise in the description).

    Be as precise as possible, and if in doubt, it's best to add more information that too few.

    When an option is marked with \"not officially supported\" / \"unsupported\", then support is dependent on availability from specific maintainers.

    "},{"location":"contributing/issues-and-pull-requests/#pull-requests","title":"Pull Requests","text":"

    Motivation

    You want to add a feature? Feel free to start creating an issue explaining what you want to do and how you're thinking doing it. Other users may have the same need and collaboration may lead to better results.

    "},{"location":"contributing/issues-and-pull-requests/#submit-a-pull-request","title":"Submit a Pull-Request","text":"

    The development workflow is the following:

    1. Fork the project
    2. Write the code that is needed :D
    3. Document your improvements if necessary
    4. Commit (and sign your commit), push and create a pull-request to merge into master. Please use the pull-request template to provide a minimum of contextual information and make sure to meet the requirements of the checklist.

    Pull requests are automatically tested against the CI and will be reviewed when tests pass. When your changes are validated, your branch is merged. CI builds the new :nightly image every night and your changes will be includes in the next version release.

    "},{"location":"examples/tutorials/adguard/","title":"AdGuard Home","text":"

    TODO

    "},{"location":"examples/tutorials/auto-updates/","title":"Auto Updates","text":""},{"location":"examples/tutorials/auto-updates/#docker-compose","title":"Docker Compose","text":"

    With Docker Compose wg-easy can be updated with a single command:

    Replace $DIR with the directory where your docker-compose.yml is located.

    cd $DIR\nsudo docker compose up -d --pull always\n
    "},{"location":"examples/tutorials/auto-updates/#docker-run","title":"Docker Run","text":"
    sudo docker stop wg-easy\nsudo docker rm wg-easy\nsudo docker pull ghcr.io/wg-easy/wg-easy\n

    And then run the docker run -d \\ ... command from Docker Run again.

    "},{"location":"examples/tutorials/auto-updates/#podman","title":"Podman","text":"

    To update wg-easy (and every container that has auto updates enabled), you can run the following command:

    sudo podman auto-update\n
    "},{"location":"examples/tutorials/basic-installation/","title":"Basic Installation","text":""},{"location":"examples/tutorials/basic-installation/#requirements","title":"Requirements","text":"
    1. You need to have a host that you can manage
    2. You need to have a domain name or a public IP address
    3. You need a supported architecture (x86_64, arm64)
    4. You need curl installed on your host
    "},{"location":"examples/tutorials/basic-installation/#install-docker","title":"Install Docker","text":"

    Follow the Docs here: https://docs.docker.com/engine/install/ and install Docker on your host.

    "},{"location":"examples/tutorials/basic-installation/#install-wg-easy","title":"Install wg-easy","text":"
    1. Create a directory for the configuration files (you can choose any directory you like):
    DIR=/docker/wg-easy\nsudo mkdir -p $DIR\n
    1. Download docker compose file
    sudo curl -o $DIR/docker-compose.yml https://raw.githubusercontent.com/wg-easy/wg-easy/master/docker-compose.yml\n
    1. Start wg-easy
     sudo docker-compose -f $DIR/docker-compose.yml up -d\n
    "},{"location":"examples/tutorials/basic-installation/#setup-firewall","title":"Setup Firewall","text":"

    If you are using a firewall, you need to open the following ports:

    These ports can be changed, so if you change them you have to update your firewall rules accordingly.

    "},{"location":"examples/tutorials/basic-installation/#setup-reverse-proxy","title":"Setup Reverse Proxy","text":"

    TODO

    "},{"location":"examples/tutorials/basic-installation/#access-the-web-ui","title":"Access the Web UI","text":"

    Open your browser and navigate to https://<your-domain>:51821 or https://<your-ip>:51821.

    Follow the instructions to set up your WireGuard VPN.

    "},{"location":"examples/tutorials/basic-installation/#update-wg-easy","title":"Update wg-easy","text":"

    To update wg-easy to the latest version, run:

    sudo docker-compose -f $DIR/docker-compose.yml pull\nsudo docker-compose -f $DIR/docker-compose.yml up -d\n
    "},{"location":"examples/tutorials/basic-installation/#auto-update","title":"Auto Update","text":"

    If you want to enable auto-updates, follow the instructions here: Auto Updates

    "},{"location":"examples/tutorials/caddy/","title":"Caddy","text":"

    TODO

    "},{"location":"examples/tutorials/docker-run/","title":"Docker Run","text":"

    To setup the IPv6 Network, simply run once:

      docker network create \\\n  -d bridge --ipv6 \\\n  -d default \\\n  --subnet 10.42.42.0/24 \\\n  --subnet fdcc:ad94:bacf:61a3::/64 wg \\\n

    To automatically install & run ``wg-easy, simply run:

      docker run -d \\\n  --net wg \\\n  -e INSECURE=true \\\n  --name wg-easy \\\n  --ip6 fdcc:ad94:bacf:61a3::2a \\\n  --ip 10.42.42.42 \\\n  -v ~/.wg-easy:/etc/wireguard \\\n  -v /lib/modules:/lib/modules:ro \\\n  -p 51820:51820/udp \\\n  -p 51821:51821/tcp \\\n  --cap-add NET_ADMIN \\\n  --cap-add SYS_MODULE \\\n  --sysctl net.ipv4.ip_forward=1 \\\n  --sysctl net.ipv4.conf.all.src_valid_mark=1 \\\n  --sysctl net.ipv6.conf.all.disable_ipv6=0 \\\n  --sysctl net.ipv6.conf.all.forwarding=1 \\\n  --sysctl net.ipv6.conf.default.forwarding=1 \\\n  --restart unless-stopped \\\n  ghcr.io/wg-easy/wg-easy:15\n

    The Web UI will now be available on http://0.0.0.0:51821.

    \ud83d\udca1 Your configuration files will be saved in ~/.wg-easy

    "},{"location":"examples/tutorials/dockerless/","title":"Without Docker","text":"

    TODO

    "},{"location":"examples/tutorials/nginx/","title":"NGINX","text":"

    TODO

    "},{"location":"examples/tutorials/podman/","title":"Podman","text":"

    This guide will show you how to run wg-easy with rootful Podman and nftables.

    "},{"location":"examples/tutorials/podman/#requirements","title":"Requirements","text":"
    1. Podman installed with version 4.4 or higher
    "},{"location":"examples/tutorials/podman/#configuration","title":"Configuration","text":"

    Create a Folder for the configuration files:

    sudo mkdir -p /etc/containers/systemd/wg-easy\nsudo mkdir -p /etc/containers/volumes/wg-easy\n

    Create a file /etc/containers/systemd/wg-easy/wg-easy.container with the following content:

    [Container]\nContainerName=wg-easy\nImage=ghcr.io/wg-easy/wg-easy:15\nAutoUpdate=registry\n\nVolume=/etc/containers/volumes/wg-easy:/etc/wireguard:Z\nNetwork=wg-easy.network\nPublishPort=51820:51820/udp\nPublishPort=51821:51821/tcp\n\n# this is used to allow access over HTTP\n# remove this when using a reverse proxy\nEnvironment=INSECURE=true\n\nAddCapability=NET_ADMIN\nAddCapability=SYS_MODULE\nAddCapability=NET_RAW\nSysctl=net.ipv4.ip_forward=1\nSysctl=net.ipv4.conf.all.src_valid_mark=1\nSysctl=net.ipv6.conf.all.disable_ipv6=0\nSysctl=net.ipv6.conf.all.forwarding=1\nSysctl=net.ipv6.conf.default.forwarding=1\n\n[Install]\n# this is used to start the container on boot\nWantedBy=default.target\n

    Create a file /etc/containers/systemd/wg-easy/wg-easy.network with the following content:

    [Network]\nNetworkName=wg-easy\nIPv6=true\n
    "},{"location":"examples/tutorials/podman/#load-kernel-modules","title":"Load Kernel Modules","text":"

    You will need to load the following kernel modules

    wireguard\nnft_masq\n

    Create a file /etc/modules-load.d/wg-easy.conf with the following content:

    wireguard\nnft_masq\n
    "},{"location":"examples/tutorials/podman/#start-the-container","title":"Start the Container","text":"
    sudo systemctl daemon-reload\nsudo systemctl start wg-easy\n
    "},{"location":"examples/tutorials/podman/#edit-hooks","title":"Edit Hooks","text":"

    In the Admin Panel of your WireGuard server, go to the Hooks tab and add the following hook:

    1. PostUp
    apk add nftables; nft add table inet wg_table; nft add chain inet wg_table postrouting { type nat hook postrouting priority 100 \\; }; nft add rule inet wg_table postrouting ip saddr {{ipv4Cidr}} oifname {{device}} masquerade; nft add rule inet wg_table postrouting ip6 saddr {{ipv6Cidr}} oifname {{device}} masquerade; nft add chain inet wg_table input { type filter hook input priority 0 \\; policy drop \\; }; nft add rule inet wg_table input udp dport {{port}} accept; nft add rule inet wg_table input tcp dport {{uiPort}} accept; nft add chain inet wg_table forward { type filter hook forward priority 0 \\; policy drop \\; }; nft add rule inet wg_table forward iifname \"wg0\" accept; nft add rule inet wg_table forward oifname \"wg0\" accept;\n
    1. PostDown
    nft delete table inet wg_table\n

    If you don't have iptables loaded on your server, you could see many errors in the logs or in the UI. You can ignore them.

    "},{"location":"examples/tutorials/podman/#restart-the-container","title":"Restart the Container","text":"

    Restart the container to apply the new hooks:

    sudo systemctl restart wg-easy\n
    "},{"location":"examples/tutorials/traefik/","title":"Traefik","text":"

    TODO

    "}]} \ No newline at end of file +{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"Welcome to the Documentation for wg-easy","text":"

    \u00a0This Documentation is Versioned

    Make sure to select the correct version of this documentation! It should match the version of the image you are using. The default version corresponds to the :latest image tag - the most recent stable release.

    This documentation provides you not only with the basic setup and configuration of wg-easy but also with advanced configuration, elaborate usage scenarios, detailed examples, hints and more.

    "},{"location":"#about","title":"About","text":"

    wg-easy is the easiest way to run WireGuard VPN + Web-based Admin UI.

    "},{"location":"#contents","title":"Contents","text":""},{"location":"#getting-started","title":"Getting Started","text":"

    If you're new to wg-easy, make sure to read the Getting Started chapter first. If you want to look at examples for Docker Run and Compose, we have an Examples page.

    "},{"location":"#contributing","title":"Contributing","text":"

    We are always happy to welcome new contributors. For guidelines and entrypoints please have a look at the Contributing section.

    "},{"location":"#migration","title":"Migration","text":"

    If you are migrating from an older version of wg-easy, please read the Migration chapter.

    "},{"location":"getting-started/","title":"Getting Started","text":"

    This page explains how to get started with wg-easy. The guide uses Docker Compose as a reference. In our examples, we mount the named volume etc_wireguard to /etc/wireguard inside the container.

    "},{"location":"getting-started/#preliminary-steps","title":"Preliminary Steps","text":"

    Before you can get started with deploying your own VPN, there are some requirements to be met:

    1. You need to have a host that you can manage
    2. You need to have a domain name or a public IP address
    3. You need a supported architecture (x86_64, arm64)
    "},{"location":"getting-started/#host-setup","title":"Host Setup","text":"

    There are a few requirements for a suitable host system:

    1. You need to have a container runtime installed

    About the Container Runtime

    On the host, you need to have a suitable container runtime (like Docker or Podman) installed. We assume Docker Compose is installed. We have aligned file names and configuration conventions with the latest Docker Compose specification. If you're using podman, make sure to read the related documentation.

    "},{"location":"getting-started/#deploying-the-actual-image","title":"Deploying the Actual Image","text":""},{"location":"getting-started/#tagging-convention","title":"Tagging Convention","text":"

    To understand which tags you should use, read this section carefully. Our CI will automatically build, test and push new images to the following container registry:

    1. GitHub Container Registry (ghcr.io/wg-easy/wg-easy)

    All workflows are using the tagging convention listed below. It is subsequently applied to all images.

    Event Image Tags cron on master nightly push a tag (v1.2.3) 1.2.3, 1.2, 1, latest

    When publishing a tag we follow the Semantic Versioning specification. The latest tag is always pointing to the latest stable release. If you want to avoid breaking changes, use the major version tag (e.g. 15).

    "},{"location":"getting-started/#get-all-files","title":"Get All Files","text":"

    Issue the following command to acquire the necessary file:

    wget \"https://raw.githubusercontent.com/wg-easy/wg-easy/master/docker-compose.yml\"\n
    "},{"location":"getting-started/#start-the-container","title":"Start the Container","text":"

    To start the container, issue the following command:

    sudo docker compose up -d\n
    "},{"location":"getting-started/#configuration-steps","title":"Configuration Steps","text":"

    Now follow the setup process in your web browser

    "},{"location":"getting-started/#stopping-the-container","title":"Stopping the Container","text":"

    To stop the container, issue the following command:

    sudo docker compose down\n

    Using the Correct Commands For Stopping and Starting wg-easy

    Use sudo docker compose up / down, not sudo docker compose start / stop. Otherwise, the container is not properly destroyed and you may experience problems during startup because of inconsistent state.

    That's it! It really is that easy.

    If you need more help you can read the Basic Installation Tutorial.

    "},{"location":"advanced/api/","title":"API","text":"

    TODO

    "},{"location":"advanced/config/optional-config/","title":"Optional Configuration","text":"

    TODO

    Env Default Example Description PORT 51821 6789 TCP port for Web UI. HOST 0.0.0.0 localhost IP address web UI binds to. INSECURE false true If access over http is allowed"},{"location":"advanced/config/unattended-setup/","title":"Unattended Setup","text":"

    If you want to run the setup without any user interaction, e.g. with a tool like Ansible, you can use these environment variables to configure the setup.

    These will only be used during the first start of the container. After that, the setup will be disabled.

    Env Example Description Group INIT_ENABLED true Enables the below env vars 0 INIT_USERNAME admin Sets admin username 1 INIT_PASSWORD Se!ureP%ssw Sets admin password 1 INIT_HOST vpn.example.com Host clients will connect to 1 INIT_PORT 51820 Port clients will connect to and wireguard will listen on 1 INIT_DNS 1.1.1.1,8.8.8.8 Sets global dns setting 2 INIT_IPV4_CIDR 10.8.0.0/24 Sets IPv4 cidr 3 INIT_IPV6_CIDR 2001:0DB8::/32 Sets IPv6 cidr 3

    \u00a0Variables have to be used together

    If variables are in the same group, you have to set all of them. For example, if you set INIT_IPV4_CIDR, you also have to set INIT_IPV6_CIDR.

    If you want to skip the setup process, you have to configure group 1

    Security

    The initial username and password is not checked for complexity. Make sure to set a long enough username and a secure password. Otherwise, the user won't be able to log in.

    Its recommended to remove the variables after the setup is done to prevent the password from being exposed.

    "},{"location":"advanced/metrics/prometheus/","title":"Prometheus","text":"

    TODO

    "},{"location":"advanced/migrate/","title":"Migrate","text":"

    If you want to migrate from an older version of wg-easy to the new version, you can find the migration guides listed below.

    "},{"location":"advanced/migrate/from-14-to-15/","title":"Migrate from v14 to v15","text":"

    This guide will help you migrate from v14 to version v15 of wg-easy.

    "},{"location":"advanced/migrate/from-14-to-15/#changes","title":"Changes","text":""},{"location":"advanced/migrate/from-14-to-15/#migration","title":"Migration","text":""},{"location":"advanced/migrate/from-14-to-15/#backup","title":"Backup","text":"

    Before you start the migration, make sure to backup your existing configuration files.

    Go into the Web Ui and click the Backup button, this should download a wg0.json file.

    Or download the wg0.json file from your container volume to your pc.

    You will need this file for the migration

    "},{"location":"advanced/migrate/from-14-to-15/#remove-old-container","title":"Remove old container","text":"
    1. Stop the running container

    If you are using docker run

    docker stop wg-easy\n

    If you are using docker-compose

    docker-compose down\n
    "},{"location":"advanced/migrate/from-14-to-15/#start-new-container","title":"Start new container","text":"

    Follow the instructions in the Getting Started or Basic Installation guide to start the new container.

    In the setup wizard, select that you already already have a configuration file and upload the wg0.json file you downloaded in the backup step.

    "},{"location":"advanced/migrate/from-14-to-15/#done","title":"Done","text":"

    You have now successfully migrated to v15 of wg-easy.

    "},{"location":"contributing/general/","title":"General Information","text":""},{"location":"contributing/general/#coding-style","title":"Coding Style","text":"

    When refactoring, writing or altering files, adhere to these rules:

    1. Adjust your style of coding to the style that is already present! Even if you do not like it, this is due to consistency. There was a lot of work involved in making all files consistent.
    2. Use pnpm lint to check your scripts! Your contributions are checked by GitHub Actions too, so you will need to do this.
    3. Use the provided .vscode/settings.json file.
    "},{"location":"contributing/general/#documentation","title":"Documentation","text":"

    Make sure to select nightly in the dropdown menu at the top. Navigate to the page you would like to edit and click the edit button in the top right. This allows you to make changes and create a pull-request.

    Alternatively you can make the changes locally. For that you'll need to have Docker installed. Run

    pnpm docs:serve\n

    This serves the documentation on your local machine on port 8080. Each change will be hot-reloaded onto the page you view, just edit, save and look at the result.

    "},{"location":"contributing/issues-and-pull-requests/","title":"Issues and Pull Requests","text":"

    This project is Open Source. That means that you can contribute on enhancements, bug fixing or improving the documentation.

    "},{"location":"contributing/issues-and-pull-requests/#opening-an-issue","title":"Opening an Issue","text":"

    Attention

    Before opening an issue, read the README carefully, study the docs for your version (maybe latest) and your search engine you trust. The issue tracker is not meant to be used for unrelated questions!

    When opening an issue, please provide details use case to let the community reproduce your problem.

    Attention

    Use the issue templates to provide the necessary information. Issues which do not use these templates are not worked on and closed.

    By raising issues, I agree to these terms and I understand, that the rules set for the issue tracker will help both maintainers as well as everyone to find a solution.

    Maintainers take the time to improve on this project and help by solving issues together. It is therefore expected from others to make an effort and comply with the rules.

    "},{"location":"contributing/issues-and-pull-requests/#filing-a-bug-report","title":"Filing a Bug Report","text":"

    Thank you for participating in this project and reporting a bug. wg-easy is a community-driven project, and each contribution counts!

    Maintainers and moderators are volunteers. We greatly appreciate reports that take the time to provide detailed information via the template, enabling us to help you in the best and quickest way. Ignoring the template provided may seem easier, but discourages receiving any support (via assignment of the label meta/no template - no support).

    Markdown formatting can be used in almost all text fields (unless stated otherwise in the description).

    Be as precise as possible, and if in doubt, it's best to add more information that too few.

    When an option is marked with \"not officially supported\" / \"unsupported\", then support is dependent on availability from specific maintainers.

    "},{"location":"contributing/issues-and-pull-requests/#pull-requests","title":"Pull Requests","text":"

    Motivation

    You want to add a feature? Feel free to start creating an issue explaining what you want to do and how you're thinking doing it. Other users may have the same need and collaboration may lead to better results.

    "},{"location":"contributing/issues-and-pull-requests/#submit-a-pull-request","title":"Submit a Pull-Request","text":"

    The development workflow is the following:

    1. Fork the project
    2. Write the code that is needed :D
    3. Document your improvements if necessary
    4. Commit (and sign your commit), push and create a pull-request to merge into master. Please use the pull-request template to provide a minimum of contextual information and make sure to meet the requirements of the checklist.

    Pull requests are automatically tested against the CI and will be reviewed when tests pass. When your changes are validated, your branch is merged. CI builds the new :nightly image every night and your changes will be includes in the next version release.

    "},{"location":"examples/tutorials/adguard/","title":"AdGuard Home","text":"

    TODO

    "},{"location":"examples/tutorials/auto-updates/","title":"Auto Updates","text":""},{"location":"examples/tutorials/auto-updates/#docker-compose","title":"Docker Compose","text":"

    With Docker Compose wg-easy can be updated with a single command:

    Replace $DIR with the directory where your docker-compose.yml is located.

    cd $DIR\nsudo docker compose up -d --pull always\n
    "},{"location":"examples/tutorials/auto-updates/#docker-run","title":"Docker Run","text":"
    sudo docker stop wg-easy\nsudo docker rm wg-easy\nsudo docker pull ghcr.io/wg-easy/wg-easy\n

    And then run the docker run -d \\ ... command from Docker Run again.

    "},{"location":"examples/tutorials/auto-updates/#podman","title":"Podman","text":"

    To update wg-easy (and every container that has auto updates enabled), you can run the following command:

    sudo podman auto-update\n
    "},{"location":"examples/tutorials/basic-installation/","title":"Basic Installation","text":""},{"location":"examples/tutorials/basic-installation/#requirements","title":"Requirements","text":"
    1. You need to have a host that you can manage
    2. You need to have a domain name or a public IP address
    3. You need a supported architecture (x86_64, arm64)
    4. You need curl installed on your host
    "},{"location":"examples/tutorials/basic-installation/#install-docker","title":"Install Docker","text":"

    Follow the Docs here: https://docs.docker.com/engine/install/ and install Docker on your host.

    "},{"location":"examples/tutorials/basic-installation/#install-wg-easy","title":"Install wg-easy","text":"
    1. Create a directory for the configuration files (you can choose any directory you like):
    DIR=/docker/wg-easy\nsudo mkdir -p $DIR\n
    1. Download docker compose file
    sudo curl -o $DIR/docker-compose.yml https://raw.githubusercontent.com/wg-easy/wg-easy/master/docker-compose.yml\n
    1. Start wg-easy
     sudo docker-compose -f $DIR/docker-compose.yml up -d\n
    "},{"location":"examples/tutorials/basic-installation/#setup-firewall","title":"Setup Firewall","text":"

    If you are using a firewall, you need to open the following ports:

    These ports can be changed, so if you change them you have to update your firewall rules accordingly.

    "},{"location":"examples/tutorials/basic-installation/#setup-reverse-proxy","title":"Setup Reverse Proxy","text":"

    TODO

    "},{"location":"examples/tutorials/basic-installation/#access-the-web-ui","title":"Access the Web UI","text":"

    Open your browser and navigate to https://<your-domain>:51821 or https://<your-ip>:51821.

    Follow the instructions to set up your WireGuard VPN.

    "},{"location":"examples/tutorials/basic-installation/#update-wg-easy","title":"Update wg-easy","text":"

    To update wg-easy to the latest version, run:

    sudo docker-compose -f $DIR/docker-compose.yml pull\nsudo docker-compose -f $DIR/docker-compose.yml up -d\n
    "},{"location":"examples/tutorials/basic-installation/#auto-update","title":"Auto Update","text":"

    If you want to enable auto-updates, follow the instructions here: Auto Updates

    "},{"location":"examples/tutorials/caddy/","title":"Caddy","text":"

    TODO

    "},{"location":"examples/tutorials/docker-run/","title":"Docker Run","text":"

    To setup the IPv6 Network, simply run once:

      docker network create \\\n  -d bridge --ipv6 \\\n  -d default \\\n  --subnet 10.42.42.0/24 \\\n  --subnet fdcc:ad94:bacf:61a3::/64 wg \\\n

    To automatically install & run ``wg-easy, simply run:

      docker run -d \\\n  --net wg \\\n  -e INSECURE=true \\\n  --name wg-easy \\\n  --ip6 fdcc:ad94:bacf:61a3::2a \\\n  --ip 10.42.42.42 \\\n  -v ~/.wg-easy:/etc/wireguard \\\n  -v /lib/modules:/lib/modules:ro \\\n  -p 51820:51820/udp \\\n  -p 51821:51821/tcp \\\n  --cap-add NET_ADMIN \\\n  --cap-add SYS_MODULE \\\n  --sysctl net.ipv4.ip_forward=1 \\\n  --sysctl net.ipv4.conf.all.src_valid_mark=1 \\\n  --sysctl net.ipv6.conf.all.disable_ipv6=0 \\\n  --sysctl net.ipv6.conf.all.forwarding=1 \\\n  --sysctl net.ipv6.conf.default.forwarding=1 \\\n  --restart unless-stopped \\\n  ghcr.io/wg-easy/wg-easy:15\n

    The Web UI will now be available on http://0.0.0.0:51821.

    \ud83d\udca1 Your configuration files will be saved in ~/.wg-easy

    "},{"location":"examples/tutorials/dockerless/","title":"Without Docker","text":"

    TODO

    "},{"location":"examples/tutorials/nginx/","title":"NGINX","text":"

    TODO

    "},{"location":"examples/tutorials/podman/","title":"Podman","text":"

    This guide will show you how to run wg-easy with rootful Podman and nftables.

    "},{"location":"examples/tutorials/podman/#requirements","title":"Requirements","text":"
    1. Podman installed with version 4.4 or higher
    "},{"location":"examples/tutorials/podman/#configuration","title":"Configuration","text":"

    Create a Folder for the configuration files:

    sudo mkdir -p /etc/containers/systemd/wg-easy\nsudo mkdir -p /etc/containers/volumes/wg-easy\n

    Create a file /etc/containers/systemd/wg-easy/wg-easy.container with the following content:

    [Container]\nContainerName=wg-easy\nImage=ghcr.io/wg-easy/wg-easy:15\nAutoUpdate=registry\n\nVolume=/etc/containers/volumes/wg-easy:/etc/wireguard:Z\nNetwork=wg-easy.network\nPublishPort=51820:51820/udp\nPublishPort=51821:51821/tcp\n\n# this is used to allow access over HTTP\n# remove this when using a reverse proxy\nEnvironment=INSECURE=true\n\nAddCapability=NET_ADMIN\nAddCapability=SYS_MODULE\nAddCapability=NET_RAW\nSysctl=net.ipv4.ip_forward=1\nSysctl=net.ipv4.conf.all.src_valid_mark=1\nSysctl=net.ipv6.conf.all.disable_ipv6=0\nSysctl=net.ipv6.conf.all.forwarding=1\nSysctl=net.ipv6.conf.default.forwarding=1\n\n[Install]\n# this is used to start the container on boot\nWantedBy=default.target\n

    Create a file /etc/containers/systemd/wg-easy/wg-easy.network with the following content:

    [Network]\nNetworkName=wg-easy\nIPv6=true\n
    "},{"location":"examples/tutorials/podman/#load-kernel-modules","title":"Load Kernel Modules","text":"

    You will need to load the following kernel modules

    wireguard\nnft_masq\n

    Create a file /etc/modules-load.d/wg-easy.conf with the following content:

    wireguard\nnft_masq\n
    "},{"location":"examples/tutorials/podman/#start-the-container","title":"Start the Container","text":"
    sudo systemctl daemon-reload\nsudo systemctl start wg-easy\n
    "},{"location":"examples/tutorials/podman/#edit-hooks","title":"Edit Hooks","text":"

    In the Admin Panel of your WireGuard server, go to the Hooks tab and add the following hook:

    1. PostUp
    apk add nftables; nft add table inet wg_table; nft add chain inet wg_table postrouting { type nat hook postrouting priority 100 \\; }; nft add rule inet wg_table postrouting ip saddr {{ipv4Cidr}} oifname {{device}} masquerade; nft add rule inet wg_table postrouting ip6 saddr {{ipv6Cidr}} oifname {{device}} masquerade; nft add chain inet wg_table input { type filter hook input priority 0 \\; policy drop \\; }; nft add rule inet wg_table input udp dport {{port}} accept; nft add rule inet wg_table input tcp dport {{uiPort}} accept; nft add chain inet wg_table forward { type filter hook forward priority 0 \\; policy drop \\; }; nft add rule inet wg_table forward iifname \"wg0\" accept; nft add rule inet wg_table forward oifname \"wg0\" accept;\n
    1. PostDown
    nft delete table inet wg_table\n

    If you don't have iptables loaded on your server, you could see many errors in the logs or in the UI. You can ignore them.

    "},{"location":"examples/tutorials/podman/#restart-the-container","title":"Restart the Container","text":"

    Restart the container to apply the new hooks:

    sudo systemctl restart wg-easy\n
    "},{"location":"examples/tutorials/traefik/","title":"Traefik","text":"

    TODO

    "}]} \ No newline at end of file diff --git a/Pre-release/sitemap.xml b/Pre-release/sitemap.xml index 6b4babdf..f98687d9 100644 --- a/Pre-release/sitemap.xml +++ b/Pre-release/sitemap.xml @@ -2,74 +2,78 @@ https://wg-easy.github.io/wg-easy/Pre-release/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/getting-started/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/advanced/api/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/advanced/config/optional-config/ - 2025-03-12 + 2025-03-14 + + + https://wg-easy.github.io/wg-easy/Pre-release/advanced/config/unattended-setup/ + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/advanced/metrics/prometheus/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/advanced/migrate/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/advanced/migrate/from-14-to-15/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/contributing/general/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/contributing/issues-and-pull-requests/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/adguard/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/auto-updates/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/basic-installation/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/caddy/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/docker-run/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/dockerless/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/nginx/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/podman/ - 2025-03-12 + 2025-03-14 https://wg-easy.github.io/wg-easy/Pre-release/examples/tutorials/traefik/ - 2025-03-12 + 2025-03-14 \ No newline at end of file diff --git a/Pre-release/sitemap.xml.gz b/Pre-release/sitemap.xml.gz index f7b64297ede7d9cf9f7d9bbebc0836f22efd6756..11b900f8547fe64456782e6ab00f49e4ac695325 100644 GIT binary patch literal 400 zcmV;B0dM{viwFpSanol4|8r?{Wo=<_E_iKh0L_-oPQx$^$L~DF)O(tZ4++p#Zk##5 z19*v-MN5+qJNtNhTo{Nm9F|;aTdw_+{a4!M({T*5Jr?pQuDV4(?`9ZHvOc<1_xAd% z?z^YqYFSGlD!_`dARN%|{Jj;;G zFjb+cj8h17>Ye9pUH3kHNAycURWOK+da0*(ewP5^G1=jIetoCrH)?S!Dd*T%PyN&M z|Lq+z%S;q86h?b#9I$(cMmQk*W>`#$8}D?=EMkJ7&VFNfH3Bn6i&lxGYi@>bL@wTt z&LxSt#Y*jw-?DkL*Z zQD_R|6at-k=XqB*y-(j3{ajEL3?idm>1ogJ5I{U8J1pnRTQ$E{i>0`nZC^R{PtyOV zcgQR?QN&Of?WJ+R?jaiCfb5%LF)41n(9X