{
  "page": {
    "tabAmbientLighting": "Ambient Lighting",
    "tabAudio": "Audio",
    "tabCannedMessage": "Canned",
    "tabDetectionSensor": "Detection Sensor",
    "tabExternalNotification": "Ext Notif",
    "tabMqtt": "MQTT",
    "tabNeighborInfo": "Neighbor Info",
    "tabPaxcounter": "Paxcounter",
    "tabRangeTest": "Range Test",
    "tabSerial": "Serial",
    "tabStoreAndForward": "S&F",
    "tabTelemetry": "Telemetry"
  },
  "ambientLighting": {
    "title": "Ambient Lighting Settings",
    "description": "Settings for the Ambient Lighting module",
    "ledState": {
      "label": "LED State",
      "description": "Sets LED to on or off"
    },
    "current": {
      "label": "Current",
      "description": "Sets the current for the LED output. Default is 10"
    },
    "red": {
      "label": "Red",
      "description": "Sets the red LED level. Values are 0-255"
    },
    "green": {
      "label": "Green",
      "description": "Sets the green LED level. Values are 0-255"
    },
    "blue": {
      "label": "Blue",
      "description": "Sets the blue LED level. Values are 0-255"
    }
  },
  "audio": {
    "title": "Audio Settings",
    "description": "Settings for the Audio module",
    "codec2Enabled": {
      "label": "Codec 2 Enabled",
      "description": "Enable Codec 2 audio encoding"
    },
    "pttPin": {
      "label": "PTT Pin",
      "description": "GPIO pin to use for PTT"
    },
    "bitrate": {
      "label": "Bitrate",
      "description": "Bitrate to use for audio encoding"
    },
    "i2sWs": {
      "label": "i2S WS",
      "description": "GPIO pin to use for i2S WS"
    },
    "i2sSd": {
      "label": "i2S SD",
      "description": "GPIO pin to use for i2S SD"
    },
    "i2sDin": {
      "label": "i2S DIN",
      "description": "GPIO pin to use for i2S DIN"
    },
    "i2sSck": {
      "label": "i2S SCK",
      "description": "GPIO pin to use for i2S SCK"
    }
  },
  "cannedMessage": {
    "title": "Canned Message Settings",
    "description": "Settings for the Canned Message module",
    "moduleEnabled": {
      "label": "Module Enabled",
      "description": "Enable Canned Message"
    },
    "rotary1Enabled": {
      "label": "Rotary Encoder #1 Enabled",
      "description": "Enable the rotary encoder"
    },
    "inputbrokerPinA": {
      "label": "Encoder Pin A",
      "description": "GPIO Pin Value (1-39) For encoder port A"
    },
    "inputbrokerPinB": {
      "label": "Encoder Pin B",
      "description": "GPIO Pin Value (1-39) For encoder port B"
    },
    "inputbrokerPinPress": {
      "label": "Encoder Pin Press",
      "description": "GPIO Pin Value (1-39) For encoder Press"
    },
    "inputbrokerEventCw": {
      "label": "Clockwise event",
      "description": "Select input event."
    },
    "inputbrokerEventCcw": {
      "label": "Counter Clockwise event",
      "description": "Select input event."
    },
    "inputbrokerEventPress": {
      "label": "Press event",
      "description": "Select input event"
    },
    "updown1Enabled": {
      "label": "Up Down enabled",
      "description": "Enable the up / down encoder"
    },
    "allowInputSource": {
      "label": "Allow Input Source",
      "description": "Select from: '_any', 'rotEnc1', 'upDownEnc1', 'cardkb'"
    },
    "sendBell": {
      "label": "Send Bell",
      "description": "Sends a bell character with each message"
    }
  },
  "detectionSensor": {
    "title": "Detection Sensor Settings",
    "description": "Settings for the Detection Sensor module",
    "enabled": {
      "label": "Enabled",
      "description": "Enable or disable Detection Sensor Module"
    },
    "minimumBroadcastSecs": {
      "label": "Minimum Broadcast Seconds",
      "description": "The interval in seconds of how often we can send a message to the mesh when a state change is detected"
    },
    "stateBroadcastSecs": {
      "label": "State Broadcast Seconds",
      "description": "The interval in seconds of how often we should send a message to the mesh with the current state regardless of changes"
    },
    "sendBell": {
      "label": "Send Bell",
      "description": "Send ASCII bell with alert message"
    },
    "name": {
      "label": "Friendly Name",
      "description": "Used to format the message sent to mesh, max 20 Characters"
    },
    "monitorPin": {
      "label": "Monitor Pin",
      "description": "The GPIO pin to monitor for state changes"
    },
    "detectionTriggeredHigh": {
      "label": "Detection Triggered High",
      "description": "Whether or not the GPIO pin state detection is triggered on HIGH (1), otherwise LOW (0)"
    },
    "usePullup": {
      "label": "Use Pullup",
      "description": "Whether or not use INPUT_PULLUP mode for GPIO pin"
    }
  },
  "externalNotification": {
    "title": "External Notification Settings",
    "description": "Configure the external notification module",
    "enabled": {
      "label": "Module Enabled",
      "description": "Enable External Notification"
    },
    "outputMs": {
      "label": "Output MS",
      "description": "Output MS"
    },
    "output": {
      "label": "Output",
      "description": "Output"
    },
    "outputVibra": {
      "label": "Output Vibrate",
      "description": "Output Vibrate"
    },
    "outputBuzzer": {
      "label": "Output Buzzer",
      "description": "Output Buzzer"
    },
    "active": {
      "label": "Active",
      "description": "Active"
    },
    "alertMessage": {
      "label": "Alert Message",
      "description": "Alert Message"
    },
    "alertMessageVibra": {
      "label": "Alert Message Vibrate",
      "description": "Alert Message Vibrate"
    },
    "alertMessageBuzzer": {
      "label": "Alert Message Buzzer",
      "description": "Alert Message Buzzer"
    },
    "alertBell": {
      "label": "Alert Bell",
      "description": "Should an alert be triggered when receiving an incoming bell?"
    },
    "alertBellVibra": {
      "label": "Alert Bell Vibrate",
      "description": "Alert Bell Vibrate"
    },
    "alertBellBuzzer": {
      "label": "Alert Bell Buzzer",
      "description": "Alert Bell Buzzer"
    },
    "usePwm": {
      "label": "Use PWM",
      "description": "Use PWM"
    },
    "nagTimeout": {
      "label": "Nag Timeout",
      "description": "Nag Timeout"
    },
    "useI2sAsBuzzer": {
      "label": "Use I²S Pin as Buzzer",
      "description": "Designate I²S Pin as Buzzer Output"
    }
  },
  "mqtt": {
    "title": "MQTT Settings",
    "description": "Settings for the MQTT module",
    "enabled": {
      "label": "Enabled",
      "description": "Enable or disable MQTT"
    },
    "address": {
      "label": "MQTT Server Address",
      "description": "MQTT server address to use for default/custom servers"
    },
    "username": {
      "label": "MQTT Username",
      "description": "MQTT username to use for default/custom servers"
    },
    "password": {
      "label": "MQTT Password",
      "description": "MQTT password to use for default/custom servers"
    },
    "encryptionEnabled": {
      "label": "Encryption Enabled",
      "description": "Enable or disable MQTT encryption. Note: All messages are sent to the MQTT broker unencrypted if this option is not enabled, even when your uplink channels have encryption keys set. This includes position data."
    },
    "jsonEnabled": {
      "label": "JSON Enabled",
      "description": "Whether to send/consume JSON packets on MQTT"
    },
    "tlsEnabled": {
      "label": "TLS Enabled",
      "description": "Enable or disable TLS"
    },
    "root": {
      "label": "Root topic",
      "description": "MQTT root topic to use for default/custom servers"
    },
    "proxyToClientEnabled": {
      "label": "Proxy to Client Enabled",
      "description": "Use the client's internet connection for MQTT (feature only active in mobile apps)"
    },
    "mapReportingEnabled": {
      "label": "Map Reporting Enabled",
      "description": "Enable or disable map reporting"
    },
    "mapReportSettings": {
      "publishIntervalSecs": {
        "label": "Map Report Publish Interval (s)",
        "description": "Interval in seconds to publish map reports"
      },
      "positionPrecision": {
        "label": "Approximate Location",
        "description": "Position shared will be accurate within this distance",
        "options": {
          "metric_km23": "Within 23 km",
          "metric_km12": "Within 12 km",
          "metric_km5_8": "Within 5.8 km",
          "metric_km2_9": "Within 2.9 km",
          "metric_km1_5": "Within 1.5 km",
          "metric_m700": "Within 700 m",
          "metric_m350": "Within 350 m",
          "metric_m200": "Within 200 m",
          "metric_m90": "Within 90 m",
          "metric_m50": "Within 50 m",
          "imperial_mi15": "Within 15 miles",
          "imperial_mi7_3": "Within 7.3 miles",
          "imperial_mi3_6": "Within 3.6 miles",
          "imperial_mi1_8": "Within 1.8 miles",
          "imperial_mi0_9": "Within 0.9 miles",
          "imperial_mi0_5": "Within 0.5 miles",
          "imperial_mi0_2": "Within 0.2 miles",
          "imperial_ft600": "Within 600 feet",
          "imperial_ft300": "Within 300 feet",
          "imperial_ft150": "Within 150 feet"
        }
      }
    }
  },
  "neighborInfo": {
    "title": "Neighbor Info Settings",
    "description": "Settings for the Neighbor Info module",
    "enabled": {
      "label": "Enabled",
      "description": "Enable or disable Neighbor Info Module"
    },
    "updateInterval": {
      "label": "Update Interval",
      "description": "Interval in seconds of how often we should try to send our Neighbor Info to the mesh"
    }
  },
  "paxcounter": {
    "title": "Paxcounter Settings",
    "description": "Settings for the Paxcounter module",
    "enabled": {
      "label": "Module Enabled",
      "description": "Enable Paxcounter"
    },
    "paxcounterUpdateInterval": {
      "label": "Update Interval (seconds)",
      "description": "How long to wait between sending paxcounter packets"
    },
    "wifiThreshold": {
      "label": "WiFi RSSI Threshold",
      "description": "At what WiFi RSSI level should the counter increase. Defaults to -80."
    },
    "bleThreshold": {
      "label": "BLE RSSI Threshold",
      "description": "At what BLE RSSI level should the counter increase. Defaults to -80."
    }
  },
  "rangeTest": {
    "title": "Range Test Settings",
    "description": "Settings for the Range Test module",
    "enabled": {
      "label": "Module Enabled",
      "description": "Enable Range Test"
    },
    "sender": {
      "label": "Message Interval",
      "description": "How long to wait between sending test packets"
    },
    "save": {
      "label": "Save CSV to storage",
      "description": "ESP32 Only"
    }
  },
  "serial": {
    "title": "Serial Settings",
    "description": "Settings for the Serial module",
    "enabled": {
      "label": "Module Enabled",
      "description": "Enable Serial output"
    },
    "echo": {
      "label": "Echo",
      "description": "Any packets you send will be echoed back to your device"
    },
    "rxd": {
      "label": "Receive Pin",
      "description": "Set the GPIO pin to the RXD pin you have set up."
    },
    "txd": {
      "label": "Transmit Pin",
      "description": "Set the GPIO pin to the TXD pin you have set up."
    },
    "baud": {
      "label": "Baud Rate",
      "description": "The serial baud rate"
    },
    "timeout": {
      "label": "Timeout",
      "description": "Seconds to wait before we consider your packet as 'done'"
    },
    "mode": {
      "label": "Mode",
      "description": "Select Mode"
    },
    "overrideConsoleSerialPort": {
      "label": "Override Console Serial Port",
      "description": "If you have a serial port connected to the console, this will override it."
    }
  },
  "storeForward": {
    "title": "Store & Forward Settings",
    "description": "Settings for the Store & Forward module",
    "enabled": {
      "label": "Module Enabled",
      "description": "Enable Store & Forward"
    },
    "heartbeat": {
      "label": "Heartbeat Enabled",
      "description": "Enable Store & Forward heartbeat"
    },
    "records": {
      "label": "Number of records",
      "description": "Number of records to store"
    },
    "historyReturnMax": {
      "label": "History return max",
      "description": "Max number of records to return"
    },
    "historyReturnWindow": {
      "label": "History return window",
      "description": "Max number of records to return"
    }
  },
  "telemetry": {
    "title": "Telemetry Settings",
    "description": "Settings for the Telemetry module",
    "deviceUpdateInterval": {
      "label": "Device Metrics",
      "description": "Device metrics update interval (seconds)"
    },
    "environmentUpdateInterval": {
      "label": "Environment metrics update interval (seconds)",
      "description": ""
    },
    "environmentMeasurementEnabled": {
      "label": "Module Enabled",
      "description": "Enable the Environment Telemetry"
    },
    "environmentScreenEnabled": {
      "label": "Displayed on Screen",
      "description": "Show the Telemetry Module on the OLED"
    },
    "environmentDisplayFahrenheit": {
      "label": "Display Fahrenheit",
      "description": "Display temp in Fahrenheit"
    },
    "airQualityEnabled": {
      "label": "Air Quality Enabled",
      "description": "Enable the Air Quality Telemetry"
    },
    "airQualityInterval": {
      "label": "Air Quality Update Interval",
      "description": "How often to send Air Quality data over the mesh"
    },
    "powerMeasurementEnabled": {
      "label": "Power Measurement Enabled",
      "description": "Enable the Power Measurement Telemetry"
    },
    "powerUpdateInterval": {
      "label": "Power Update Interval",
      "description": "How often to send Power data over the mesh"
    },
    "powerScreenEnabled": {
      "label": "Power Screen Enabled",
      "description": "Enable the Power Telemetry Screen"
    }
  }
}