Simplify entrypoint.sh

entrypoint.sh

@@ -1,65 +1,58 @@
-#!/bin/bash
+#!/bin/ash
 
 set -e
 
 default_route_ip=$(ip route | grep default | awk '{print $3}')
 if [[ -z "$default_route_ip" ]]; then
-    echo "No default route configured" >&2
-    exit 1
+	echo "No default route configured" >&2
+	exit 1
 fi
 
 configs=`find /etc/wireguard -type f -printf "%f\n"`
 if [[ -z "$configs" ]]; then
-    echo "No configuration files found in /etc/wireguard" >&2
-    exit 1
+	echo "No configuration file found in /etc/wireguard" >&2
+	exit 1
 fi
 
 config=`echo $configs | head -n 1`
 interface="${config%.*}"
 
 if [[ "$(cat /proc/sys/net/ipv4/conf/all/src_valid_mark)" != "1" ]]; then
-    echo "sysctl net.ipv4.conf.all.src_valid_mark=1 is not set" >&2
-    exit 1
+	echo "sysctl net.ipv4.conf.all.src_valid_mark=1 is not set" >&2
+	exit 1
 fi
 
-# The net.ipv4.conf.all.src_valid_mark sysctl is set when running the Docker container, so don't have WireGuard also set it
+# The net.ipv4.conf.all.src_valid_mark sysctl is set when running the container, so don't have WireGuard also set it
 sed -i "s:sysctl -q net.ipv4.conf.all.src_valid_mark=1:echo Skipping setting net.ipv4.conf.all.src_valid_mark:" /usr/bin/wg-quick
+
+# Start WireGuard
 wg-quick up $interface
 
-# IPv4 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the Docker network
-docker_network="$(ip -o addr show dev eth0 | awk '$3 == "inet" {print $4}')"
-docker_network_rule=$([ ! -z "$docker_network" ] && echo "! -d $docker_network" || echo "")
-iptables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $docker_network_rule -j REJECT
+# IPv4 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the container network
+container_ipv4_network="$(ip -o addr show dev eth0 | awk '$3 == "inet" {print $4}')"
+container_ipv4_network_rule=$([ ! -z "$container_ipv4_network" ] && echo "! -d $container_ipv4_network" || echo "")
+iptables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $container_ipv4_network_rule -j REJECT
 
-# IPv6 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the Docker network
-docker6_network="$(ip -o addr show dev eth0 | awk '$3 == "inet6" {print $4}')"
-if [[ "$docker6_network" ]]; then
-    docker6_network_rule=$([ ! -z "$docker6_network" ] && echo "! -d $docker6_network" || echo "")
-    ip6tables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $docker6_network_rule -j REJECT
+# IPv6 kill switch: traffic must be either (1) to the WireGuard interface, (2) marked as a WireGuard packet, (3) to a local address, or (4) to the container network
+container_ipv6_network="$(ip -o addr show dev eth0 | awk '$3 == "inet6" {print $4}')"
+if [[ "$container_ipv6_network" ]]; then
+	container_ipv6_network_rule=$([ ! -z "$container_ipv6_network" ] && echo "! -d $container_ipv6_network" || echo "")
+	ip6tables -I OUTPUT ! -o $interface -m mark ! --mark $(wg show $interface fwmark) -m addrtype ! --dst-type LOCAL $container_ipv6_network_rule -j REJECT
 else
-    echo "Skipping IPv6 kill switch setup since IPv6 interface was not found" >&2
-fi
-
-# Support LOCAL_NETWORK environment variable, which was replaced by LOCAL_SUBNETS
-if [[ -z "$LOCAL_SUBNETS" && "$LOCAL_NETWORK" ]]; then
-    LOCAL_SUBNETS=$LOCAL_NETWORK
-fi
-
-# Support LOCAL_SUBNET environment variable, which was replaced by LOCAL_SUBNETS (plural)
-if [[ -z "$LOCAL_SUBNETS" && "$LOCAL_SUBNET" ]]; then
-    LOCAL_SUBNETS=$LOCAL_SUBNET
+	echo "IPv6 interface not found, skipping IPv6 kill switch" >&2
 fi
 
+# Allow traffic to local subnets
 for local_subnet in ${LOCAL_SUBNETS//,/$IFS}
 do
-    echo "Allowing traffic to local subnet ${local_subnet}" >&2
-    ip route add $local_subnet via $default_route_ip
-    iptables -I OUTPUT -d $local_subnet -j ACCEPT
+	echo "Allowing traffic to local subnet ${local_subnet}" >&2
+	ip route add $local_subnet via $default_route_ip
+	iptables -I OUTPUT -d $local_subnet -j ACCEPT
 done
 
 shutdown () {
-    wg-quick down $interface
-    exit 0
+	wg-quick down $interface
+	exit 0
 }
 
 trap shutdown SIGTERM SIGINT SIGQUIT