MeshCore

History

1sthandy 7ecbdd2bfc Add RAK4631 PoE and Ethernet companion support (W5100S / RAK13800) Adds support for running a RAK4631 over PoE using the RAK13800 (W5100S) Ethernet module on a RAK19018 base, in two roles: - PoE repeater: powers up reliably on the RAK19018 (Silvertel) converter. The cold-start path is shortened and CPU sleep is disabled, because dropping below the converter's hold current makes it fold back and reset. Boot-voltage protection is bypassed when battery-less on PoE. - Ethernet companion: exposes the MeshCore companion protocol as a TCP server (default port 5000) over the W5100S, so Home Assistant connects to the device's IP. Uses a static IP to avoid blocking DHCP at cold start. W5100S PHY bring-up is deferred out of setup() into loop() to avoid collapsing the marginal PoE supply during the cold-start window. New files: - src/helpers/SerialEthernetInterface.{cpp,h}: TCP transport for the companion serial frame protocol. - variants/rak4631/W5100SPoE.{cpp,h}: W5100S power/reset + init helper. New platformio envs: - RAK_4631_repeater_poe (+ _debug) - RAK_4631_companion_radio_eth All additions are guarded by WITH_W5100S_POE / WITH_ETHERNET_COMPANION, so existing RAK4631 builds are unaffected. Co-Authored-By: Claude Opus 4.8 <[email protected]>		2 months ago
..
MyMesh.cpp	Fix `recv_pkt_region` incorrect usage	4 weeks ago
MyMesh.h	Fix `recv_pkt_region` incorrect usage	4 weeks ago
RateLimiter.h	* repeater: onAnonDataRecv(), now rejecting non-ASCII password (preparing for future request codes)	9 months ago
UITask.cpp	uitask: screen and radio poweroff moved to board	2 weeks ago
UITask.h	repeater: poweroff on long press	3 weeks ago
main.cpp	Add RAK4631 PoE and Ethernet companion support (W5100S / RAK13800)	5 days ago