MeshCore

History

Tesso M Costa 3b98c4e243 ThinkNode M6: button shutdown/wake for repeater and room server Fixes #2313. Hold the Function Button ~5s to power off (matches the board's stock firmware timing); any press wakes it back up, since the chip is fully halted in SYSTEMOFF and can't measure hold duration while off. The power LED blinks 3x on both shutdown and wake/boot to confirm the action registered. ThinkNodeM6Board::powerOff() now arms the button as a GPIO wake source (pull-up + SENSE_LOW) before entering SYSTEMOFF via NRF52Board::powerOff(). Scoped to simple_repeater and simple_room_server only, since companion_radio already has an in-flight change (#2837) moving its button handling into UITask. Tested on hardware: shutdown, wake, and LED feedback all verified on a physical ThinkNode M6 repeater.		2 days ago
..
ThinkNodeM6Board.cpp	ThinkNode M6: button shutdown/wake for repeater and room server	2 days ago
ThinkNodeM6Board.h	ThinkNode M6: button shutdown/wake for repeater and room server	2 days ago
platformio.ini	usb companion firmwares now require build flag to include usb interface	4 days ago
target.cpp	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	3 months ago
target.h	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	3 months ago
variant.cpp	thinknode_m6: initial port	8 months ago
variant.h	thinknode_m6: initial port	8 months ago