#pragma once

#include "WVariant.h"

#define USE_LFXO
#define VARIANT_MCK (64000000ul)

#define PINS_COUNT        (48)
#define NUM_DIGITAL_PINS  (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)

#define WIRE_INTERFACES_COUNT (1)
#define PIN_WIRE_SDA (0 + 30)
#define PIN_WIRE_SCL (0 + 5)
#define PIN_BOARD_SDA PIN_WIRE_SDA
#define PIN_BOARD_SCL PIN_WIRE_SCL

#define SPI_INTERFACES_COUNT (1)
#define PIN_SPI_MISO (0 + 23)
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK  (0 + 19)
#define PIN_SPI_NSS  LORA_CS

#define LED_BUILTIN (32 + 15)
#define PIN_LED     LED_BUILTIN
#define LED_RED     (-1)
#define LED_GREEN   (-1)
#define LED_BLUE    (-1)
#define LED_PIN     (-1)
#define P_LORA_TX_LED LED_BUILTIN
#define LED_STATE_ON LOW

#define PIN_BUTTON1  (32 + 10)
#define BUTTON_PIN   PIN_BUTTON1
#define PIN_USER_BTN BUTTON_PIN

#define USE_SX1262
#define SX126X_CS    (0 + 24)
#define LORA_CS      SX126X_CS
#define SX126X_DIO1  (0 + 20)
#define SX126X_BUSY  (0 + 17)
#define SX126X_RESET (0 + 25)
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8

#define P_LORA_NSS   LORA_CS
#define P_LORA_DIO_1 SX126X_DIO1
#define P_LORA_BUSY  SX126X_BUSY
#define P_LORA_RESET SX126X_RESET
#define P_LORA_MISO  PIN_SPI_MISO
#define P_LORA_MOSI  PIN_SPI_MOSI
#define P_LORA_SCLK  PIN_SPI_SCK

#define USE_KCT8103L_PA_ONLY
#define LORA_KCT8103L_EN      (0 + 15)
#define LORA_KCT8103L_TX_RX   (0 + 16)
#define LORA_PA_POWER         LORA_KCT8103L_EN
#define RF_PA_DETECT_PIN      (0 + 13)
#define RF_PA_HIGH_POWER_VALUE HIGH

#define GPS_L76K
#define GPS_RESET_MODE LOW
#define PIN_GPS_RESET (32 + 6)
#define PIN_GPS_RESET_ACTIVE GPS_RESET_MODE
#define PIN_GPS_EN (0 + 7)
#define PIN_GPS_EN_ACTIVE LOW
#define GPS_EN_ACTIVE PIN_GPS_EN_ACTIVE
#define PIN_GPS_STANDBY (32 + 2)
#define PIN_GPS_PPS (32 + 4)
#define GPS_BAUD_RATE 9600

// Upstream names are from the GPS perspective. MeshCore's PIN_GPS_TX is the
// CPU RX pin because EnvironmentSensorManager passes it as Serial1 RX.
#define GPS_TX_PIN (32 + 7)
#define GPS_RX_PIN (32 + 5)
#define PIN_GPS_TX GPS_RX_PIN
#define PIN_GPS_RX GPS_TX_PIN

#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL2_RX (-1)
#define PIN_SERIAL2_TX (-1)

#define HAS_HARDWARE_WATCHDOG
#define HARDWARE_WATCHDOG_DONE (0 + 9)
#define HARDWARE_WATCHDOG_WAKE (0 + 10)
#define HARDWARE_WATCHDOG_TIMEOUT_MS (8 * 60 * 1000)

#define SERIAL_PRINT_PORT 0

#define PIN_BAT_CTL (0 + 21)
#define ADC_CTRL PIN_BAT_CTL
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN (0 + 4)
#define PIN_VBAT_READ BATTERY_PIN
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (4.916F)
#define MV_LSB (3000.0F / 4096.0F)

#define NRF52_POWER_MANAGEMENT
#define PWRMGT_VOLTAGE_BOOTLOCK 3100
#define PWRMGT_LPCOMP_AIN 2
#define PWRMGT_LPCOMP_REFSEL 1