mirror/MeshCore - MeshCore - Всем привет, ну это уж ваше дело

Author	SHA1	Message	Date
Wessel Nieboer	67d22401b1	Pass rtc_clock to all MicroNMEALocationProvider instances Enable GPS time synchronization across all variants by passing &rtc_clock to MicroNMEALocationProvider. When GPS gets a valid fix, the RTC clock is now updated automatically every 30 minutes. Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag, lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1, lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3, promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.	7 months ago
Wessel Nieboer	49d8313501	Fix pin mapping & TX switch (it's DIO2)	5 months ago
Wessel Nieboer	5a5568ed56	Drive CTX low first	5 months ago
Wessel Nieboer	ac2aa03b09	Add SX126X_REGISTER_PATCH for RAK3401	5 months ago
Wessel Nieboer	70f1ad4aeb	Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA and LNA operation The RAK13302 1W module uses a Skyworks SKY66122-11 front-end module with three digital control pins (CSD, CTX, CPS) that must be actively driven by the host MCU. The previous code only managed CTX (GPIO 31) — toggling it for TX/RX — but never initialized CSD (GPIO 24) or CPS (GPIO 21), leaving them floating with no pull-up/pull-down resistors on the PCB. With floating CSD and CPS, the SKY66122 was in an undefined operating mode: - The 30 dB TX PA may not have been reliably engaging - The 16 dB RX LNA was never reliably active, degrading receive sensitivity	5 months ago
João Brázio	fcfbb458f8	Refactor environment names and build flags for RAK variants	6 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	7 months ago
Rastislav Vysoky	d5a73b2394	fix: build errors because of changes in NRF52 base class	6 months ago
chrisdavis2110	ed5d2909fc	updated variant rak3401	7 months ago
chrisdavis2110	06c4ca19ab	added variant rak3401	7 months ago