MeshCore

98 Tags

227 MiB

Tree: f858f2e4bb

Author	SHA1	Message	Date
Wessel Nieboer	2bb6f636a4	Add 1ms delay after powering PA (cold-boot)	4 months ago
Wessel Nieboer	329e408197	Hold GC1109 PA_POWER during deep sleep for LNA RX wake The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep to keep the LNA active, enabling proper RX sensitivity for wake-on-packet. Without this, the LNA is unpowered during sleep and RX wake sensitivity is degraded by ~17dB. Release RTC holds in begin() after configuring GPIO registers (not before) to ensure glitch-free pin transitions on wake. Trade-off: ~6.5mA additional sleep current for significantly improved wake-on-packet range.	4 months ago
João Brázio	71136671bd	Implement remote lna toggle cli cmd	4 months ago
Wessel Nieboer	23b4baa066	Enable register patch heltec tracker v2	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Oliver Weyhmüller	a7a6bb51ce	Apply #1331 to other WiFi companions	5 months ago
recrof	04c0c40b39	set max contacts to 350 and channels to 40 for esp32c3, s3 and c6	7 months ago
Quency-D	70ac820594	add heltec tracker v2 board.	8 months ago