* Enable the new UI on the BLE and USB Companion roles.
* Fix compilation issues with the repeater and room server roles.
* Remove ESP32-related alternate pinout cruft from the NRF build tree.
* build.sh: add build-matching-firmwares command to allow e.g. building
all roles for a given variant by passing the variant name.
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is
based on the Xiao nRF54 code with pin numbers and functions changed to suit the
differences in hardware between the WIO SX1262 board and the Ikoka Stick.
Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend
in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot.
Adds support for an SSD1306 display connected to the display header. Note the
display pinout is the same as the RAK4631 display header so make sure to use a
display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND
reversed from what this board expects).
Adds support for display rotation to SSD1306Display via a platformIO define.
This support was added following the same paradigms found elsewhere in the code
for rotating a display.
Changes to migrate sensor code to the ESM.
Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501)
Removed the GPS specific envs from platformio.ini and enabled GPS for all envs.
Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.
- Added the BME680 environment sensor functionality
- Added the GPS Repeater env for those wanting it
- Cleaned up the GPS and other RAK4631SensorManager code
Verified build and functionality on normal and GPS repeater and companion envs.
IAQ readout is still a work in progress, but a placeholder can be seen on Channel 2 of the app telemetry.
Added RAK12500 GPS support
Added socket scan capability to determine which socket the GPS is connected to
T-beam supreme: added conditional to displaying location data to only when gps is active
* BasChatMesh: new onContactRequest(), for PAYLOAD_TYPE_REQ handling.
* companion, repeater and room_server: now with basic 'plumbing' to handle REQ_TYPE_GET_TELEMETRY_DATA (0x03).
* dependency: added CayenneLPP to libdeps
* all target.* modules now with a stub 'sensors' object.
Scott Powell
João Brázio
Wessel Nieboer
kelsey hudson
cod3doomy
recrof
Rob Loranger
Scott Powell