MeshCore

Commit Graph

Author	SHA1	Message	Date
agessaman	a71cc23854	fix(room_server): support RX boosted gain The room server never supported RX boosted gain, while the repeater does. Three consequences on SX1262/SX1268 boards: - boosted gain was never applied to the radio at boot, so a room server ran in power-saving RX mode while an identical repeater ran boosted - a real receive-sensitivity difference with nothing pointing at it - _prefs.rx_boosted_gain was never initialised (the prefs are memset to 0 before defaults are set), so it defaulted to off - 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had already written the value to prefs and saved them, so a stale setting survived reboot and was never applied Mirror the repeater's implementation: initialise the pref default under the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply it during radio init, and override setRxBoostedGain() so the CLI reports success and takes effect. Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server (guards compile out cleanly).	3 days ago
Scott Powell	2af1e6d099	* first draft of new ConfigSerializer. (simple embedded JSON prefs)	1 week ago
Neil Alexander	0d7379520f	Fix `recv_pkt_region` incorrect usage The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket` but direct/non-flood packets would never pass through that function, so the pointer was not cleared for them. `sendFloodReply` would then later use it blindly, which meant that the response would either inherit the region from the last flood packet, or refer to a non-initialised pointer if no region floods had been received yet.	3 weeks ago
Wessel Nieboer	7c8e092457	Have CAD be a separate toggle (set cad on/off)	2 months ago
Wessel Nieboer	4f9a091671	Use hardware channel activity detection for checking interference	5 months ago
Scott Powell	8c0d5c5b24	* version 1.16.0	2 months ago
Scott Powell	8fc2da5c98	* default now 8, per the will of the peoples.	2 months ago
Scott Powell	5f6821bb66	* new CLI config: flood.max.advert (default 16)	2 months ago
Sefinek	cc05ae555a	docs: fix typos, grammar, and formatting in FAQ and code comments	2 months ago
Scott Powell	f66c1d0258	* simplified the new flood.max.unscoped pref	2 months ago
Chris Barker	a33f3011a5	Feat: Adds flood.max.unscoped setting Before this commit, there was no way to set a different max hop count for unscoped messages. Now with this change, by defaul it tracks the flood.max setting, until a user provides a flood.max.unscoped value, which tax precidence for packets if ROUTE_TYPE_FLOOD is true.	2 months ago
AtlavoxDev	e5dab6b999	Rename bootComplete() to onBootComplete() for naming consistency Matches the existing event-style lifecycle hooks on MainBoard (onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.	2 months ago
AtlavoxDev	39a69b86c3	Add MainBoard::bootComplete() hook for boot-indicator LED feedback Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and shouldn't be interacted with until startup completes.	2 months ago
Rastislav Vysoky	01500e55d8	Change room server flood advert interval to 47 hours	2 months ago
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	3 months ago
liamcottle	3cd40902b3	added website to room server splash screen	3 months ago
Scott Powell	3751785400	* version 1.15.0	3 months ago
Scott Powell	77d02e844f	* bug fix	3 months ago
Scott Powell	df1e12de3e	* Repeater, room server: rule change for sendFloodReply()	3 months ago
Scott Powell	4131a455a2	* repeater: refactored 'region' CLI commands -> CommonCLI * room server: added RegionMap, and new CommonCLI wiring, default_scope handling * sensor: only minimal RegionMap wiring. Still needs work to handle default-scope	3 months ago
Wessel Nieboer	0a13ac7fc7	Default button polarity to active-LOW across all firmware types Nearly all LoRa boards use a boot button that pulls to ground when pressed.	6 months ago
Quency-D	65752fef72	Fix the memory leak issue in the strdup function.	4 months ago
Quency-D	8435464c84	Add v4 FEM LNA CLI control commands.	4 months ago
Scott Powell	467959cc3b	* version 1.14.1	4 months ago
Orum	b4b66521b6	Add MCU temperature to telemetry responses from room servers.	4 months ago
Scott Powell	fcfdc5fc5b	* Repeater and Room Server: flood advert timer now uses the path_hash_mode pref	4 months ago
Ryan Gregg	88892de864	Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code The Ethernet retry loop in repeater and room server checked hardwareStatus() and linkStatus() before calling Ethernet.begin(), which always returned EthernetNoHardware since hardware detection only happens during begin(). Extract shared Ethernet CLI code into EthernetCLI.h to prevent future divergence. Also fix time_t type mismatch in companion radio Ethernet init. Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Ryan Gregg	61ba79966b	Address PR review feedback from liamcottle (second round) - Rename eth command to eth.status for consistency with other commands - Rename generateDeviceMac to generateEthernetMac for clarity - Refactor ethernet_handle_command to return false by default - Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface) - Boot companion radio without Ethernet on init failure (LoRa-only recovery mode) - Remove > prompt from ethernet CLI for consistency with serial interface - Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined - Fix TCP socket leak when duplicate client detection fires - Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface - Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio) - Clarify eth.status command is only available in repeater and room server firmware Co-Authored-By: Claude Sonnet 4.6 <[email protected]>	5 months ago
Ryan Gregg	3e9ceba24a	Updates based on PR review feedback from liamcottle	5 months ago
Ryan Gregg	70b51bd096	Add native Ethernet support for RAK4631 repeater, room server, and companion Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling TCP CLI access on port 23 as an alternative to BLE/Serial connections. - New SerialEthernetInterface for nRF52 with DHCP, reconnection handling, and shared WB_IO2 power pin management with GPS module - Ethernet build targets for repeater, room server, and companion firmware - Prevent GPS from toggling WB_IO2 when Ethernet module is active - CI build check for all three ETH firmware targets Co-Authored-By: Claude Opus 4.6 <[email protected]>	5 months ago
Scott Powell	3fe2dd7f48	* ver 1.14.0	5 months ago
Wessel Nieboer	1ab8a6f6da	Address review comments	5 months ago
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	5 months ago
Scott Powell	9d5c4865c3	* room server fix	5 months ago
Scott Powell	e52d57c065	* companion: new pref: path_hash_mode (0..2) * companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode * companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)	5 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	5 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	5 months ago
Scott Powell	e2571accbe	* ver 1.13.0	5 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	7 months ago
Scott Powell	465776d667	* ver 1.12.0	6 months ago
liamcottle	d13bc446de	added build flag to enable/disable boot advert	6 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	6 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	6 months ago
taco	988287bfd7	recalc ClientACL shared_secrets at startup	6 months ago
taco	6336bd5b72	refactor ClientACL and CommonCLI, add ClientACL::clear()	6 months ago
taco	9dd52bd0cc	build fix for room server with MESH_DEBUG=1	6 months ago
Quency-D	c89a0e9929	Add an external watchdog module	6 months ago
ViezeVingertjes	eb4fa032ff	Implement token bucket duty cycle enforcement	7 months ago
Scott Powell	e054597a18	* ver 1.11.0	8 months ago
Scott Powell	30ccc1fa01	* BUG FIX: remote login fix same as repeater	8 months ago

1 2 3 4 5

241 Commits (ee79df4c4f607ff295a10901c030abcca2f6c325)