MeshCore

Commit Graph

Author	SHA1	Message	Date
Florent	3ee2f77877	restore display and radio poweroff in ui	3 weeks ago
Kevin Le	7d7de88707	board->powerOff() is sufficient to power off radio, display, GPS and components	3 weeks ago
Wessel Nieboer	7c8e092457	Have CAD be a separate toggle (set cad on/off)	2 months ago
Wessel Nieboer	4f9a091671	Use hardware channel activity detection for checking interference	5 months ago
Scott Powell	2e73fe948e	* fix for anon lastmod	1 month ago
Scott Powell	07648e3344	* fix for anon contacts when full	1 month ago
Quency-D	5300fa18c7	Restore companion NodePrefs file ending	1 month ago
Quency-D	3ee58fd2e3	Remove companion FEM RX gain command IDs	1 month ago
liamcottle	ae0bb7ee95	use releasePacket instead of _mgr->free	2 months ago
liamcottle	07bfe90695	free packet on parse failure	2 months ago
Scott Powell	8c0d5c5b24	* version 1.16.0	2 months ago
Sefinek	cc05ae555a	docs: fix typos, grammar, and formatting in FAQ and code comments	2 months ago
taco	e449af1723	bypass auto-shutdown delay for e-ink devices	2 months ago
Scott Powell	83ad3a6dc0	* direct/zero hop by default	2 months ago
taco	3ce1cf404e	NRF52: disable autoshutdown if powered, add auto-shutdown warning for oled	2 months ago
Scott Powell	bc5d648204	* contacts sync fix * fix for reusing transient/anon contacts only	2 months ago
Scott Powell	d9df8307ca	* first draft	2 months ago
Scott Powell	b259fbd01b	* power saving: hasPendingWork() now also checks if there's a pending contacts write	2 months ago
Kemal Hadimli	bb781ff10a	companion_radio: opt-in KEEP_DISPLAY_ON_USB to keep OLED on while powered AUTO_OFF_MILLIS is a power-save feature aimed at battery use. When the board reports isExternalPowered() == true (USB or other DC source), blanking the screen serves no purpose — there's nothing to conserve. But OLEDs are vulnerable to burn-in with static content, so this behaviour is gated behind a new build flag KEEP_DISPLAY_ON_USB. Default is unchanged from upstream — the display blanks after AUTO_OFF_MILLIS on USB or battery. Variants that ship with an LCD instead of an OLED (e.g. heltec_t096) can opt in by adding -D KEEP_DISPLAY_ON_USB to their env, gaining always-on-while-powered without exposing OLED users to burn-in risk. When the flag is enabled, the implementation refreshes _auto_off every loop iteration while externally powered, so the timer naturally counts a fresh AUTO_OFF_MILLIS window from the moment power is removed — no instantaneous-blank-on-unplug. Applied to all three companion_radio UI flavours (ui-new, ui-tiny, ui-orig). Boards without an isExternalPowered() override use the base-class default in MeshCore.h (returns false), so battery-powered behaviour is unchanged everywhere. Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>	2 months ago
Sefinek	00d445a269	fix: fix typos in source code comments	2 months ago
Sefinek	bbe41eb375	fix: rename `CMD_DEVICE_QEURY` to `CMD_DEVICE_QUERY`	2 months ago
AtlavoxDev	e5dab6b999	Rename bootComplete() to onBootComplete() for naming consistency Matches the existing event-style lifecycle hooks on MainBoard (onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.	2 months ago
AtlavoxDev	39a69b86c3	Add MainBoard::bootComplete() hook for boot-indicator LED feedback Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and shouldn't be interacted with until startup completes.	2 months ago
Rastislav Vysoky	a37078f6c5	Companion repeat: update to more usable default EU frequency 869.495 is in 869.4 to 869.65 range which does have 10% duty cycle and 500mW ERP.	2 months ago
Kevin Le	da7663a6fb	Fixed hasPendingWork for BLE companions	2 months ago
Kevin Le	280213d41f	Fixed to put hasPendingWork out of ENV_INCLUDE_GPS	4 months ago
Kevin Le	6b1099161c	Added Power Saving for NRF52 companions	4 months ago
taco	26c641bc63	tiny ui rendering fixes	2 months ago
taco	9f683975c1	add torch	3 months ago
taco	8540c98947	add tinyui for lilygo t-echo card	3 months ago
Scott Powell	c588540b1b	* new CMD_SEND_RAW_PACKET	2 months ago
liamcottle	841db56595	add build flag to configure allowed repeat freq range	3 months ago
Rococo88	a0cc3bab4b	Refactor WiFi auto-reconnect to use non-blocking polling	3 months ago
Scott Powell	6979326340	* CMD_SET_FLOOD_SCOPE_KEY, now with second variant for explicitly sending un-scoped * FIRMWARE_VER_CODE bumped to 12	3 months ago
liamcottle	5a509752a7	don't play startup tune if buzzer pref disabled	3 months ago
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	3 months ago
chrisdavis2110	0265851621	added PIN_USER_BTN_ANA for rak3401 companion usb and companion ble	3 months ago
liamcottle	5f75b90ff9	added website to companion splash screen	3 months ago
Quency-D	444dcfb8fd	Change write to read for radio_fem_rxgain	3 months ago
Quency-D	62b0d82682	Restore WiFi operation command scope comments	3 months ago
Quency-D	9d26953398	Remove unnecessary blank line in MyMesh.cpp	3 months ago
Quency-D	c42f6db0eb	Revise according to the review comments. Co-authored-by: Copilot <[email protected]>	3 months ago
Scott Powell	3751785400	* version 1.15.0	3 months ago
Scott Powell	d2fdd6fad4	* companion: FIRMWARE_VER_CODE now bumped to 11	3 months ago
Scott Powell	efdd2b6a6c	* companion: simplified the CMD_GET / CMD_SET _DEFAULT_FLOOD_SCOPE	3 months ago
Scott Powell	d131e8ae35	* companion: RegionMap now used in Datastore * companion: new CMD_SET_DEFAULT_FLOOD_SCOPE * support for regional builds with DEFAULT_REGION_SCOPE	3 months ago
Scott Powell	3b32f35288	* Companion: default scope	4 months ago
Scott Powell	2325973fec	* Companion: applyGPSPrefs() now just in one place (moved out of UITask)	4 months ago
Alejandro Ramirez	f8dbdce6bb	fix: apply persisted GPS enabled setting on boot for companion radio The companion_radio example was not restoring the GPS enabled/disabled preference from flash after reboot. The preference was being saved correctly when toggled via the mobile app, but on boot, sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false and nothing subsequently restored the persisted state. Added applyGpsPrefs() (matching the pattern in simple_repeater, simple_sensor, and simple_room_server) and call it from main.cpp after sensors.begin() to ensure the GPS hardware is initialized before the saved preference is applied.	4 months ago
Quency-D	8435464c84	Add v4 FEM LNA CLI control commands.	4 months ago

1 2 3 4 5 ...

504 Commits (eb97a375d3a804a12ec5d2e2cd85b69da28810bf)