The Ebyte S22 module comes in three variants, 22dBm, 30dBm, and 33dBm. Each
requires a different TX power max setting to avoid frying the PA frontend.
Breaks out variants and roles by module type.
* Enable the new UI on the BLE and USB Companion roles.
* Fix compilation issues with the repeater and room server roles.
* Remove ESP32-related alternate pinout cruft from the NRF build tree.
* build.sh: add build-matching-firmwares command to allow e.g. building
all roles for a given variant by passing the variant name.
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is
based on the Xiao nRF54 code with pin numbers and functions changed to suit the
differences in hardware between the WIO SX1262 board and the Ikoka Stick.
Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend
in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot.
Adds support for an SSD1306 display connected to the display header. Note the
display pinout is the same as the RAK4631 display header so make sure to use a
display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND
reversed from what this board expects).
Adds support for display rotation to SSD1306Display via a platformIO define.
This support was added following the same paradigms found elsewhere in the code
for rotating a display.
liamcottle
taco
kelsey hudson