MeshCore

Commit Graph

Author	SHA1	Message	Date
MrAlders0n	d2b4733406	feat: add stats-extpower CLI command for INA3221 power monitoring Add a serial-only `stats-extpower` command that returns per-channel voltage and current readings from the INA3221 external power monitoring board as JSON. Returns an error message if no supported hardware is detected. Changes: - New stats-extpower CLI command in CommonCLI.cpp - formatExtPowerStatsReply virtual method added through the callback chain (CommonCLI.h → MyMesh) - formatExtPowerStats implementation in EnvironmentSensorManager that reads INA3221 channels - CLI documentation update	4 months ago
taco	1500a5a9cb	add get bootloader.ver command for nrf52	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
João Brázio	edeafde51c	Fix: Correct validation logic in isValidName function	5 months ago
Scott Powell	5627500988	* new "clkreboot" CLI command	5 months ago
liamcottle	7e24bd00b9	increase maximum flood advert interval to 168 hours (7 days)	5 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	5 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	5 months ago
entr0p1	1f59e52880	nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout Added NRF52840 power management core functionality: - Boot‑voltage lockout - Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2) - LPCOMP wake (for voltage-driven shutdowns) - VBUS wake (for voltage-driven shutdowns) - Per-board shutdown handler for board-specific tasks - Exposed CLI queries for power‑management status in CommonCLI.cpp - Added documentation in docs/nrf52_power_management.md. - Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards	5 months ago
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	5 months ago
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER * CommonCLI: new "get/set owner.info ..."	5 months ago
Kevin Le	33b1e7edb9	Added pad after powersaving_enabled	6 months ago
Kevin Le	89a289eb22	Added powersaving_enabled sanitization Moved powersaving_enabled to match serialization order	6 months ago
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 Added CLI to enable/disable powersaving	6 months ago
taco	fc93d84fb8	tweaks get/set adcMultiplier logic	7 months ago
taco	5a3ea64a97	Repeater: add adc.multiplier setting	7 months ago
zach	850d57a8f2	Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web REPO: 1. Flash a repeater 2. Connect over lora 3. Set bw to 42.7 KHZ It will revert back due to converting a double to a float. REPO2: 1.Flash Repeater 2. Apply float fix 3. Set to say 20.8 4. try to get value via app or web cli repeater config It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float	7 months ago
Stephan Rodemeier	16c294ce60	Allow SF smaller than 7 to be saved	7 months ago
Scott Powell	82b4c1e6b0	* new PAYLOAD_TYPE_CONTROL (11) * repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only) * node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )	7 months ago
Michael Hart	81ab944682	Adds serial commands to get stats - Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor. - Updated CommonCLI to handle new stats commands.	8 months ago
recrof	87677fda76	allow spreading factor from 5 and bandwidth from 7.8kHz	8 months ago
Florent	37dc715a8e	SensorManager: remove setSettingByKey	8 months ago
Florent	3210475f35	CommonCli: Remove dependency on target.h	8 months ago
Scott Powell	93c0180740	* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()	8 months ago
Scott Powell	837e7dcbdb	* Advert type fix * GPS pref defaults tidy	8 months ago
Florent	bf1da43d7d	gps_cli: gps advert to control advert location policy	8 months ago
Florent	f6064b41e9	gps_cli: set node location based on gps	8 months ago
Florent	76dcfbb23a	gpsCli: use parseTextParts	8 months ago
Florent de Lamotte	6ed8e9d514	gps_cli: gps state is now saved and restored upon reboot	8 months ago
Florent de Lamotte	341b69e3c9	sensor list command	8 months ago
Florent de Lamotte	7be65c148e	cli_gps: remove callbacks and add generic sensor set/get.	8 months ago
Florent	0502bc370d	CommonCLI: gps management commands	8 months ago
João Brázio	9b4d93d112	Add bridge type command to CLI for reporting bridge configuration	8 months ago
João Brázio	8edcb46a28	Bridge: enhance CLI configuration options	8 months ago
liamcottle	ec48e6acfc	added 'board' cli command to get board name	9 months ago
João Brázio	1d45c7ec66	Add bridge management CLI	9 months ago
Scott Powell	ee194a7b19	* added CommonCLI::saveIdentity()	10 months ago
Scott Powell	7c7faaab05	* agc.reset.interval rounding warning	10 months ago
Scott Powell	6984d9f496	* minor compilation fix	10 months ago
liamcottle	2d5016bac3	add ability to remove neighbour via cli	10 months ago
Scott Powell	28af68c187	* new CommonCLI commands: "get prv.key", "set prv.key {hex}"	11 months ago
Scott Powell	4689f9b425	* CommonCLI: reverted "set radio ..." command, added new "tempradio ..." command	11 months ago
Scott Powell	ea4aa93594	* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins * "advert" command now with longer delay, so that CLI reply is sent first	11 months ago
Scott Powell	6bc8dd28d4	* CommonCLI: new "multi.acks" config setting	11 months ago
Scott Powell	29435342b0	* implemented getter methods for telemetry value types	11 months ago
Scott Powell	9cecbad2a7	* refactor: CommonCLI, processing of optional command prefix moved to handleCommand() call sites * Sensor, anon_req now just for admin login (guest password now unused) * special CLI command, "setperm {pubkey-hex} {permissions-int16}" for admin(s) to manage user access (permissions 0 = remove)	11 months ago
Rob Loranger	e5ecf29d0c	return range with advert interval set error updates both local and flood advert preference setting errors to include the allowable range and time units	12 months ago
Rob Loranger	f30698eacb	add time output to both clock sync and time <epoch> cli	12 months ago
Scott Powell	32ca3dc9d0	* repeater and room server: new CLI setting "agc.reset.interval" (seconds)	1 year ago
Scott Powell	b3d78ac8a7	* interference threshold now stored in prefs, CLI: set/get "int.thresh"	1 year ago

1 2

80 Commits (d2b473340645b06c3aaa294336b3c72f75c81c37)