MeshCore

Commit Graph

Author	SHA1	Message	Date
João Brázio	eafbd85d17	Add RAK4631 support for rs232 bridge	6 months ago
taco	fc93d84fb8	tweaks get/set adcMultiplier logic	7 months ago
taco	5a3ea64a97	Repeater: add adc.multiplier setting	7 months ago
recrof	88a6141943	fix: move bme680 detection before bme280	7 months ago
Stephan Rodemeier	16c294ce60	Allow SF smaller than 7 to be saved	7 months ago
Scott Powell	b31d3e7b5f	* added StrHelper::fromHex()	7 months ago
Scott Powell	963290ea15	* repeater: various "region" CLI changes * transport codes 0000 and FFFF reserved	7 months ago
Scott Powell	ddac13ae80	* repeater: CLI, added "region put" and "region remove" commands	7 months ago
Scott Powell	cf547da857	* RegionMap: get/set Home Region * repeater: admin CLI, changed "allowf ", "denyf ", added "home"	7 months ago
Scott Powell	7419ed71f7	* region filtering now applied in allowPacketForward()	7 months ago
Scott Powell	82b4c1e6b0	* new PAYLOAD_TYPE_CONTROL (11) * repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only) * node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )	7 months ago
Scott Powell	9ebeb477aa	* RegionMap: inverted 'flags' to _deny_ bits * Mesh: new filterRecvFloodPacket() for overriding * repeater CLI: 'allow' -> 'allowf' or 'denyf'	7 months ago
Scott Powell	d9ff3a4d02	* Mesh: new sendFlood() overload with transport codes. * BaseChatMesh: sendFloodScoped(), for overriding with some outbound 'scope' / TransportKey * companion: new 'send_scope' variable.	7 months ago
Scott Powell	ecd30f4d36	* new CLI commands: region, region load, region save, region get, region allow	7 months ago
Scott Powell	f797744f7c	* misc RegionMap and key store methods	7 months ago
Scott Powell	03fc949014	* setting up framework for Regions, TransportKeys, etc	7 months ago
Scott Powell	7755400a35	* Companion: Now using transport codes { 0, 0 } when Share contact zero hop. * Repeater: onAdvertRecv(), adverts via Share now NOT added to neighbours table	7 months ago
Scott Powell	7abe6c9693	* Upping max channel hash conflicts to 4 (was 2)	7 months ago
Scott Powell	3d9378d91e	* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days	7 months ago
Michael Hart	81ab944682	Adds serial commands to get stats - Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor. - Updated CommonCLI to handle new stats commands.	8 months ago
Woodie-07	0e259a63ed	lr1110 irq fixes fix incorrect irqs used in isReceiving. also remove getTimeOnAir override as fixed upstream	7 months ago
Woodie-07	2981fc70e1	new workaround	7 months ago
Wesley Ellis	4cfbd3bad5	Switch BMP085 mode to 0 for ULTRALOWPOWER	8 months ago
Wesley Ellis	ac15131296	Add support for bmp085/bmp180 temperature/pressure sensor	8 months ago
recrof	87677fda76	allow spreading factor from 5 and bandwidth from 7.8kHz	8 months ago
Florent	37dc715a8e	SensorManager: remove setSettingByKey	8 months ago
Florent	ce70792309	lgfx_display: better handle display class construction	8 months ago
Florent	3210475f35	CommonCli: Remove dependency on target.h	8 months ago
Woodie-07	02351abc2d	change println to debug macro in lr1110 patch	8 months ago
liquidraver	3c48f01601	BME680 library doesn't have altitude calculation, we can add it here to match other sensors'	8 months ago
liquidraver	0e7486552d	Add simple BME680 support to RAK with adafruit library	8 months ago
Scott Powell	cd920693ec	* UITask: new UI_HAS_JOYSTICK * MomentaryButton: new constructor 'multiclick' param * WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI	8 months ago
Scott Powell	d3be6afccb	* fix for non-RAK targets	8 months ago
Scott Powell	fa8c31be88	* fix for RAK12500 GPS (I2C)	8 months ago
Woodie-07	8426fddcb7	workaround for LR1110 shift issue it seems that if the LR1110 radio hears a packet corrupted in a specific way, it'll report a packet of 0 length and with the header error IRQ set. every packet received afterwards will then be shifted to the right by 4 bytes on top of the radio's reported offset. this can occur multiple times with the shift increasing by 4 bytes each time. thus, this patch will read from an additional offset after hearing the trigger packet. transmitting seems to reset the shift - unsure exactly what operation resets it but standby() is called after tx so patch assumes shift is 0 after standby(). more investigation may be needed here.	8 months ago
Scott Powell	93c0180740	* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()	8 months ago
Scott Powell	837e7dcbdb	* Advert type fix * GPS pref defaults tidy	8 months ago
recrof	69cddbca4e	move LilyGoTLoraBoard.h to variants, use template in platformio.ini, cleanup	8 months ago
recrof	7cb2e0863a	move StationG2Board.h to variants, enable ESM, add companion wifi, cleanup	8 months ago
recrof	1979517381	heltec v2 cleanup	8 months ago
recrof	c4a2b13930	moved HeltecV3Board.h to variant folder	8 months ago
Florent	bf1da43d7d	gps_cli: gps advert to control advert location policy	8 months ago
recrof	4dc3dda2d8	xiao c3: migrated to esm, added missing roles, cleanup	8 months ago
Florent	f6064b41e9	gps_cli: set node location based on gps	8 months ago
Florent	76dcfbb23a	gpsCli: use parseTextParts	8 months ago
Quency-D	70ac820594	add heltec tracker v2 board.	8 months ago
Florent de Lamotte	6ed8e9d514	gps_cli: gps state is now saved and restored upon reboot	8 months ago
Florent de Lamotte	341b69e3c9	sensor list command	8 months ago
João Brázio	fb46e5cc8a	Refactor debug logging across bridge implementations	8 months ago
Florent de Lamotte	7be65c148e	cli_gps: remove callbacks and add generic sensor set/get.	8 months ago

1 2 3 4 5 ...

705 Commits (baedddb25dead095d439ce458ed7439f10ffde44)