MeshCore

Commit Graph

Author	SHA1	Message	Date
liamcottle	b37201db89	double press top button to go back on gat562 mesh watch	2 months ago
liamcottle	1a897a3b5f	use top button to wake hibernated gat562 mesh watch	2 months ago
MGJ	76be69dcde	Reduce unnecessary compilation time	2 months ago
MGJ	cd6c09a0d9	Support for GAT562 Mesh Watch13 device	2 months ago
Jeroen Vermeulen	da689c8e91	Fix default radio.rxgain for Station G2 As @LitBomb pointed out in his [comment](https://github.com/meshcore-dev/MeshCore/issues/2118#issuecomment-4108168109) on #2118 RX Boosted Gain should not be enabled for the Station G2. This change is a fix for #2124 to make the default of `radio.rxgain` to be OFF on the Station G2. This restores the pre-1.14.1 behaviour with the only change being the user is now able to change the setting in the CLI.	2 months ago
Konstantin	c7b8db55e6	Fix typo for ThinkNode M5 room server environment	2 months ago
whywilson	b07ab2bc55	Remove useless define in GAT562_Mesh_EVB_Pro.	3 months ago
Quency-D	f6cfed66b3	add heltec_mesh_node_t096 board.	3 months ago
whywilson	69123ca056	Update GAT562_Mesh_EVB_Pro Config and remove LoRa Specification and change Repeater name.	3 months ago
João Brázio	75895895f0	Add USE_SX1262 flag to multiple platformio.ini configurations	3 months ago
Wessel Nieboer	0e62240119	Set AUTO_OFF_MILLIS to 0 for E213, E290	3 months ago
Wessel Nieboer	696323c11b	Fix Heltec E213 and E290 e-ink board builds	3 months ago
Sybren A. Stüvel	9349e6ab6b	SenseCap Solar: fix use of LED_GREEN `5188221584` changed LED_RED/GREEN to LED_WHITE/BLUE, but didn't convert all uses of LED_GREEN.	3 months ago
whywilson	c994c6206d	Add GAT562 Mesh EVB Pro Repeater and Room Server.	3 months ago
MGJ	307142986f	Support for GAT562 30S Mesh Kit device	3 months ago
MGJ	82689512f8	Fix incorrect comments	3 months ago
MGJ	e9ff0bd9b0	Remove GAT562 Mesh Tracker Pro device radio preset	3 months ago
Sam Schlegel	bfdbcd85e8	Add nrf52 power management for RAK3401	3 months ago
MGJ	011c5ba102	Add support for the GAT562 Mesh Tracker Pro device	3 months ago
MGJ	dc48126baf	Add support for the GAT562 Mesh Tracker Pro device	3 months ago
Confi	5188221584	sensecap_solar: fix LED definitions (white=11, blue=12)	4 months ago
Quency-D	7a8370fa69	Fixed a bug in the LORA_TX_POWER comment.	3 months ago
Quency-D	cdca79540f	Update Heltec Tracker v2 to version KCT8103L.	3 months ago
João Brázio	9a95e25ef2	Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants	3 months ago
Quency-D	241805e8c1	Fixed the compilation error of HeltecV4Board::begin.	3 months ago
Wessel Nieboer	67d22401b1	Pass rtc_clock to all MicroNMEALocationProvider instances Enable GPS time synchronization across all variants by passing &rtc_clock to MicroNMEALocationProvider. When GPS gets a valid fix, the RTC clock is now updated automatically every 30 minutes. Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag, lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1, lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3, promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.	5 months ago
Wessel Nieboer	c0c9c17cf5	and buildscript	3 months ago
Wessel Nieboer	780720c117	and board!	3 months ago
Wessel Nieboer	90fcd1043f	Fix ikoka handheld build The extends was wrong.	3 months ago
Quency-D	3b5139a655	Update variants/heltec_v4/LoRaFEMControl.cpp Co-authored-by: Wessel <[email protected]>	3 months ago
Quency-D	bab650fe61	LNA is enabled by default. Co-authored-by: Wessel <[email protected]>	3 months ago
Quency-D	70d3b96768	Update variants/heltec_v4/LoRaFEMControl.cpp init function Co-authored-by: Wessel <[email protected]>	3 months ago
Wessel Nieboer	14f066bed0	Fix sleep	3 months ago
Wessel Nieboer	8b7fed65de	default lna_enabled=true	3 months ago
Wessel Nieboer	59d9770ab9	Add GPS support Heltec Wireless Tracker v1.x Pin mapping verified against HTIT-Tracker V0.5 schematic: - GPIO35 (GPS_EN): N-ch MOSFET drives P-ch high-side switch, active HIGH - GPIO36 (GPS_RST): hardware reset, active LOW - GPIO33/34: UART TX/RX Delegates power management to MicroNMEALocationProvider begin()/stop() which independently controls GPS power via GPS_EN and shares VEXT with the display through RefCountedDigitalPin.	5 months ago
Wessel Nieboer	49d8313501	Fix pin mapping & TX switch (it's DIO2)	3 months ago
Wessel Nieboer	5a5568ed56	Drive CTX low first	3 months ago
Wessel Nieboer	ac2aa03b09	Add SX126X_REGISTER_PATCH for RAK3401	3 months ago
Wessel Nieboer	70f1ad4aeb	Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA and LNA operation The RAK13302 1W module uses a Skyworks SKY66122-11 front-end module with three digital control pins (CSD, CTX, CPS) that must be actively driven by the host MCU. The previous code only managed CTX (GPIO 31) — toggling it for TX/RX — but never initialized CSD (GPIO 24) or CPS (GPIO 21), leaving them floating with no pull-up/pull-down resistors on the PCB. With floating CSD and CPS, the SKY66122 was in an undefined operating mode: - The 30 dB TX PA may not have been reliably engaging - The 16 dB RX LNA was never reliably active, degrading receive sensitivity	3 months ago
Wessel Nieboer	2bb6f636a4	Add 1ms delay after powering PA (cold-boot)	4 months ago
Wessel Nieboer	329e408197	Hold GC1109 PA_POWER during deep sleep for LNA RX wake The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep to keep the LNA active, enabling proper RX sensitivity for wake-on-packet. Without this, the LNA is unpowered during sleep and RX wake sensitivity is degraded by ~17dB. Release RTC holds in begin() after configuring GPIO registers (not before) to ensure glitch-free pin transitions on wake. Trade-off: ~6.5mA additional sleep current for significantly improved wake-on-packet range.	4 months ago
Specter242	e08dcbdd03	sensecap solar: stabilize wake pin and add button hold poweroff	3 months ago
Specter242	e323755990	sensecap solar: add poweroff command and board power/LED parity	3 months ago
Quency-D	f0d37e552d	Added version identification.	3 months ago
Quency-D	9312fe780a	add heltec v4.3	3 months ago
Wessel Nieboer	8bf63256b6	Fix remote LNA toggle bugs: correct register comparison, add missing implementations, wire up companion radio getRxBoostedGain was returned true because both 0x94 (power saving) and 0x96 (boosted gain = 1) return true	3 months ago
Scott Powell	f4748a7f9d	* misc	3 months ago
callum5892	9f4eeeeceb	Added build flags for M5Stack Unit C6L Enabled USB-CDC on boot for M5Stack_Unit_C6L_companion_radio_usb to fix serial connection issues	3 months ago
Sam Koucha	5a885bffe4	Make full use of board's 8MB Flash and add companion WiFI target	3 months ago
Sander van Grieken	3dc14976a0	add companion usb build target for Heltec Wireless Tracker	3 months ago

1 2 3 4 5 ...

954 Commits (b37201db89ccc71f4e66091c375cc5081745dc68)