MeshCore

Commit Graph

Author	SHA1	Message	Date
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
kelsey hudson	9d009074da	Ikoka Stick: Move to unified code naming conventions	9 months ago
kelsey hudson	7b08acf56d	Ikoka Stick: Move to unified code naming conventions	9 months ago
kelsey hudson	bed311313a	Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard. Adds a new variant 'ikoka_stick_nrf' and associated support files. This is based on the Xiao nRF54 code with pin numbers and functions changed to suit the differences in hardware between the WIO SX1262 board and the Ikoka Stick. Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot. Adds support for an SSD1306 display connected to the display header. Note the display pinout is the same as the RAK4631 display header so make sure to use a display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND reversed from what this board expects). Adds support for display rotation to SSD1306Display via a platformIO define. This support was added following the same paradigms found elsewhere in the code for rotating a display.	10 months ago
Rob Loranger	90656e7d06	clean up xiao nrf52 move variant specific code out of src/helpers redefine RXEN for alternate radio pinout	11 months ago
Florent	b4330e376c	compiles xiao_nrf52 board files only if we compile for xiao_nrf52	1 year ago
Florent de Lamotte	82bcd74932	xiao-nrf52 : initial support for meshcore initial config for xiao_nrf52 repeater role for xiao-nrf52 xiao-nrf52 correction on bat voltage xiao-nrf52 this file should not be here ...	1 year ago
taco	be64fa7ca0	build: fix RAK, T114, T1000 builds	1 year ago
taco	5c2c248f70	build: fix RAK, T114, T1000e builds	1 year ago
Scott Powell	a4bb3782a4	* OTA update for ESP32 targets	1 year ago
recrof	882377e4d6	fixed: added back pin inits when SDA and SCL are set.	1 year ago
recrof	d525680b71	added display support for RAK4631, removed Wire.begin(int, int) from nrf52 devices, cosmetic changes	1 year ago
Scott Powell	ae8fb5d9b1	* Heltec v3.2 VEXT fix * Heltec T114 LED fix, (now flashes with LoRa TX)	1 year ago
Rastislav Vysoky	b74ae1302b	Added support for Heltec t114	1 year ago

3 Commits (b024b9e1a14db4309692972f6d2cfca53c4020dd)