MeshCore

Commit Graph

Author	SHA1	Message	Date
446564	dc9b4f8e84	add nano g2 usb companion	10 months ago
Quency-D	be243a2663	Add heltec_vision_master_e213 board.	10 months ago
Scott Powell	86ec82fd06	* Heltec CT62: sensor role (with 2 channel relay support + 1 digital input)	10 months ago
kelsey hudson	bed311313a	Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard. Adds a new variant 'ikoka_stick_nrf' and associated support files. This is based on the Xiao nRF54 code with pin numbers and functions changed to suit the differences in hardware between the WIO SX1262 board and the Ikoka Stick. Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot. Adds support for an SSD1306 display connected to the display header. Note the display pinout is the same as the RAK4631 display header so make sure to use a display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND reversed from what this board expects). Adds support for display rotation to SSD1306Display via a platformIO define. This support was added following the same paradigms found elsewhere in the code for rotating a display.	10 months ago
gumbero	af7db5593b	Update platformio.ini	10 months ago
Tomas Gabor	6e26a6a78c	Added room option to T-Beam SX1276	10 months ago
wel97459	331a29b082	Changed radio_init to use radio.std_init this also changes the preamble to 16 as before it was 8	10 months ago
Alexander Begoon	6902dd81fa	Move variant specific code	10 months ago
Alexander Begoon	ce4e559c01	Add support for Xiao ESP32C6 with external antenna configuration	10 months ago
Ded	4d97bee02a	good oops	10 months ago
446564	53c1f70412	various fixes for nano g2 gps - baud rate changed to default - switch state detected at boot to enable position - small edge cases fixed - more mesh debugging output added Co-authored-by: LitBomb <[email protected]> Co-authored-by: Nick from BOSTON	10 months ago
Alexander Begoon	fa3500944b	Add Meshimi configuration and environment setups in platformio.ini	10 months ago
Scott Powell	d1e13d0b9e	Revert "disable led light on t-echo device" This reverts commit `55453e1136`.	10 months ago
TasmanDevil	6214b75e83	disable led light on t-echo device	10 months ago
Quency-D	fb8a4d12b1	refactor variants #393	10 months ago
Quency-D	612dde73e9	Add HELTEC MeshSolar board.	10 months ago
recrof	6861b0702f	create sensor template in platformio.ini, update heltec v3 and rak4631 to use new template	10 months ago
taco	a49b5aaba7	fix: wrong QSPI pins for wio tracker l1	10 months ago
446564	dca20ea994	add wsl3 usb companion	10 months ago
Martin Kudlacek	822850b4d5	Support for Sensirion SHT4x	10 months ago
Martin Kudlacek	a96d1022a0	Added support for TI INA260	10 months ago
Scott Powell	b0946b3f6b	Revert "disable led light on t-echo device" This reverts commit `55453e1136`.	10 months ago
TasmanDevil	55453e1136	disable led light on t-echo device	10 months ago
recrof	2e346bc61c	promicro: added sensor role	11 months ago
recrof	e48e64ae84	fix: bad linker directory; added companion ble and usb roles	11 months ago
Florent	b5a8a1a883	sensors: gpio command	11 months ago
recrof	f88ebad604	enable all sensors on RAK4631	11 months ago
taco	296a1e45fb	fix: Wio Tracker L1: correct joystick press button pin	11 months ago
taco	c5783660c4	radio.std_init() for heltec ct62	11 months ago
Florent	9be28c2002	rak3x72: sensor target	11 months ago
Mike Cochrane	93802fe250	Add VL53L0X time-of-flight distance sensor to Heltec V3 Sensor	11 months ago
Mike Cochrane	9f2a77c92e	Add Melexis Contact-less Infrared Sensor - MLX90614 to Heltec V3 Sensor	11 months ago
Mike Cochrane	e4f7b9e37f	Allow the SDA and SCL pins for Environment sensors to be configured independantly. Add Heltec V3 Sensor.	11 months ago
cod3doomy	6b4592bfe2	Cleanup and fixes -Added RAK_4631 define back -Added includes for common RAK sensors that are currently supported in ESM -Set global variables to static -Reduced delay time within the RAK gps init sequence	11 months ago
cod3doomy	660ab0692f	RAK4631 ESM Migration Changes to migrate sensor code to the ESM. Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501) Removed the GPS specific envs from platformio.ini and enabled GPS for all envs. Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.	11 months ago
taco	3f996ef4fc	fix: Wio Tracker L1: add DIO2 as rfSwitch and correct TCXO voltage.	11 months ago
Rastislav Vysoky	3c92c6aa3b	sensecap_solar: disable GPS until it's supported	11 months ago
Rastislav Vysoky	f9e595687e	Heltec Wireless Paper fix: radio init failed: -2	11 months ago
recrof	6be8e19a9f	move radiolib wrappers to dedicated directory	11 months ago
recrof	854a8dfe2f	move rak to nrf52_core, remove nrf52840_core	11 months ago
taco	78cd655789	Seeed Wio Tracker L1: initial support	11 months ago
Normunds Gavars	ed7ca6fb60	393 clean up Minewsemi ME25LS01 variant	11 months ago
Normunds Gavars	cdd44212a1	393 clean up Promicro variant	11 months ago
Rob Loranger	9d0dd7947f	move rak4631 specific files into variant folder	11 months ago
Florent	5f7bd0fe77	wio-e5-mini: simple_sensor target	11 months ago
Scott Powell	7fb7b69bbc	* first cut of new simple_sensor sketch	11 months ago
Scott Powell	d3831821c7	* XiaoC3 custom, .ini fixes	11 months ago
jankowski-t	00ebb090e7	Migrate Meshadventurer to std_init()	11 months ago
Florent de Lamotte	d30412bf65	xiao_c3: small fixups	11 months ago
Jelle Kalf	5ec89dff5b	Xiao ESP32 C3: * Fixed pins for mainstream wio sx1262 * Moved previous sx1262 support to _custom version * companion firmware added	11 months ago

1 2 3 4 5 ...

430 Commits (a7dcd112ac658e3cd0d2a9bcc5c5158cdcdc1d9d)