MeshCore

Commit Graph

Author	SHA1	Message	Date
Wessel Nieboer	8a9a0dca5f	Fix GPS +8mA power leak when disabled (nRF52) On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN. MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3 rail) but stop() never set it back LOW, leaving the GPS module powered even when disabled. Assert reset pin in stop() to mirror begin(), and guard _location->loop() behind gps_active check. Fixes meshcore-dev/MeshCore#1628	4 months ago
Wessel Nieboer	59d9770ab9	Add GPS support Heltec Wireless Tracker v1.x Pin mapping verified against HTIT-Tracker V0.5 schematic: - GPIO35 (GPS_EN): N-ch MOSFET drives P-ch high-side switch, active HIGH - GPIO36 (GPS_RST): hardware reset, active LOW - GPIO33/34: UART TX/RX Delegates power management to MicroNMEALocationProvider begin()/stop() which independently controls GPS power via GPS_EN and shares VEXT with the display through RefCountedDigitalPin.	5 months ago
Wessel Nieboer	9bae9d0ed2	fix comment, we know the band now after checking LR1110 user manual	4 months ago
Wessel Nieboer	85f764a114	Calibrate configured frequency for AGC reset	4 months ago
Wessel Nieboer	f54948e06d	Also implement LR11x10 AGC reset Similar to SX126x but simpler.	4 months ago
Wessel Nieboer	b2032e11b6	make it more dry	4 months ago
Wessel Nieboer	9106ab46e1	reset noise_floor sampling after agc reset	4 months ago
Wessel Nieboer	a2dc2eb50c	when doing AGC reset, call Calibrate(0x7F) 1. warm sleep 2. wake to stdby 3. Calibrate(0x7F) to reset all internal blocks 4. re-apply DIO2 RF / boosted gain & register patch to make sure everything is as it was	4 months ago
Wessel Nieboer	f81ec4b14c	fix agc reset	4 months ago
Wessel Nieboer	49d8313501	Fix pin mapping & TX switch (it's DIO2)	4 months ago
Wessel Nieboer	5a5568ed56	Drive CTX low first	4 months ago
Wessel Nieboer	ac2aa03b09	Add SX126X_REGISTER_PATCH for RAK3401	4 months ago
Wessel Nieboer	70f1ad4aeb	Fix RAK3401 SKY66122-11 FEM control: enable CSD/CPS for proper PA and LNA operation The RAK13302 1W module uses a Skyworks SKY66122-11 front-end module with three digital control pins (CSD, CTX, CPS) that must be actively driven by the host MCU. The previous code only managed CTX (GPIO 31) — toggling it for TX/RX — but never initialized CSD (GPIO 24) or CPS (GPIO 21), leaving them floating with no pull-up/pull-down resistors on the PCB. With floating CSD and CPS, the SKY66122 was in an undefined operating mode: - The 30 dB TX PA may not have been reliably engaging - The 16 dB RX LNA was never reliably active, degrading receive sensitivity	4 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	4 months ago
Wessel Nieboer	2bb6f636a4	Add 1ms delay after powering PA (cold-boot)	4 months ago
Wessel Nieboer	329e408197	Hold GC1109 PA_POWER during deep sleep for LNA RX wake The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep to keep the LNA active, enabling proper RX sensitivity for wake-on-packet. Without this, the LNA is unpowered during sleep and RX wake sensitivity is degraded by ~17dB. Release RTC holds in begin() after configuring GPIO registers (not before) to ensure glitch-free pin transitions on wake. Trade-off: ~6.5mA additional sleep current for significantly improved wake-on-packet range.	4 months ago
Daniel Novak	c7568a8db0	Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal() Instead of overloading getOutboundCount() with a magic sentinel value, add a dedicated getOutboundTotal() method to the PacketManager interface that returns the total queue size without time filtering. This eliminates the fragile convention that caused the regression and makes the two operations — time-filtered count vs total count — explicitly separate in the API.	3 months ago
Daniel Novak	c436bd42c5	Fix countBefore sentinel regression from millis wraparound fix PR #1795 changed PacketQueue::countBefore() to use signed 2's complement arithmetic for millis wraparound safety. However, this broke the 0xFFFFFFFF sentinel pattern used by callers to mean "count all packets regardless of schedule". With the signed comparison, countBefore(0xFFFFFFFF) always returns 0, causing hasPendingWork() to report false and repeaters to sleep with packets still queued. Stats reporting also shows queue_len as 0. Add an early-return for the sentinel value before the loop, and document the sentinel convention on the virtual interface and implementation.	3 months ago
fdlamotte	06ab9f7f6b	Merge pull request #1871 from enricolorenzoni59/gps-sync-reply `gps sync` reply: fill buffer with text	3 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	3 months ago
Liam Cottle	eee42c5099	Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4	3 months ago
Scott Powell	b67decfba0	* bug fix: Packet::writeTo(), Packet::readFrom()	4 months ago
Scott Powell	ca81f645ed	Merge branch 'multibyte-paths' into dev	4 months ago
ripplebiz	5280433098	Merge pull request #1820 from recrof/patch-1 Update default preset to EU/UK (Narrow)	4 months ago
lincomatic	557d714c3c	don't limit bridge_baud to 115200	4 months ago
Scott Powell	def01889aa	Merge branch 'dev' into multibyte-paths	4 months ago
Scott Powell	8737c64fdb	* Packet::copyPath() fix	4 months ago
Liam Cottle	eeae32b25d	Merge pull request #1826 from dreirund/docs_-_fix-faq.md-bogous-last-tableofcontentsentry docs/faq.md: Table of Contents: Remove bogous `[\| \| High Output \| 22 dBm \| 28 dBm \| \|](#--high-output--22-dbm--28-dbm--)`	4 months ago
Liam Cottle	1bde7de521	Merge pull request #1822 from dreirund/docs_-_add-more-other-projects docs/faq.md: Section 5.14: Add more external projects, and categorise the section.	4 months ago
Liam Cottle	e6e87fb8ca	Merge pull request #1838 from weebl2000/github_workflows_sanitycheck Add basic sanity test github PR workflow	4 months ago
Wessel Nieboer	15cce12efd	Add basic sanity test github PR workflow Build a few generic variants to verify at least those compile. Can't hurt.	4 months ago
dreirund	751a3e49be	Merge pull request #1 from dreirund/docs_-_categorise-faq: "docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?"" docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?"	4 months ago
dreirund	ff72564bca	docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?". In `[docs/faq.md](https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md)`, the entries are now grouped by category. This patch applies on top of https://github.com/meshcore-dev/MeshCore/pull/1822.	4 months ago
dreirund	b16adee4bb	docs/faq.md: Table of Contents: Remove bogous `[\| \| High Output \| 22 dBm \| 28 dBm \| \|](#--high-output--22-dbm--28-dbm--)`. The table of contents of `docs/faq.md` had at the end a bogous entry ```markdown - [\| \| High Output \| 22 dBm \| 28 dBm \| \|](#--high-output--22-dbm--28-dbm--) ``` This patch removes that bogous entry.	4 months ago
dreirund	5e24d03a91	faq.md: Section 5.14: Added more external projects. Added to section 5.14 "Are there are projects built around MeshCore?": * awesome-meshcore * meshcore-open * MeshCore-Cardputer-ADV * LunarCore * MC-Term * Meck * Meshcore for Wio Tracker L1 Pro * MeshCore map auto uploader	4 months ago
Scott Powell	f4748a7f9d	* misc	4 months ago
Rastislav Vysoky	b777a7c635	Update default preset to EU/UK (Narrow)	4 months ago
Scott Powell	b14879ce2d	* CMD_GET_ADVERT_PATH bug fix	4 months ago
Robert Ekl	b43319d1a4	docs: correct CLI command forms and targeted typos	4 months ago
Liam Cottle	f7c8cf1146	Merge pull request #1808 from callum5892/dev Added build flags for M5Stack Unit C6L	4 months ago
callum5892	9f4eeeeceb	Added build flags for M5Stack Unit C6L Enabled USB-CDC on boot for M5Stack_Unit_C6L_companion_radio_usb to fix serial connection issues	4 months ago
Scott Powell	9d5c4865c3	* room server fix	4 months ago
Scott Powell	213d085012	* revert CMD_SEND_SELF_ADVERT, use _prefs.path_hash_mode	4 months ago
Scott Powell	45564bad9b	* Dispatcher bug fixes	4 months ago
Scott Powell	5b0884ad2d	* added CMD_SET_PATH_HASH_MODE	4 months ago
Scott Powell	e52d57c065	* companion: new pref: path_hash_mode (0..2) * companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode * companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)	4 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	4 months ago
Scott Powell	05e7b682b9	Merge branch 'dev' into multibyte-paths	4 months ago
ripplebiz	9c318561da	Merge pull request #1792 from ElectroMW/feature/t-beam-supreme-improvements T-Beam Supreme - Make full use of board's 8MB Flash and add Companion WiFi target	4 months ago
ripplebiz	2e0fa3ec46	Merge pull request #1794 from accumulator/heltec_wireless_tracker_companion_usb add companion usb build target for Heltec Wireless Tracker	4 months ago

1 2 3 4 5 ...

2481 Commits (8ac8c4d59d8d2e508e96b53bb15fac531af87ecc) All Branches Search

2481 Commits (8ac8c4d59d8d2e508e96b53bb15fac531af87ecc)

All Branches