MeshCore

Commit Graph

Author	SHA1	Message	Date
Lloyd	d32fa5c004	Manually restart BLE advertising after disconnect to prevent stack freeze Replaced use of `restartOnDisconnect(true)` with explicit (existing) manual re-advertising logic. This avoids Bluetooth stack instability caused by overlapping advertising state, Changes: - Added explicit `Bluefruit.Advertising.stop()` and data clears in `startAdv()` - Disabled automatic restart with `restartOnDisconnect(false)` - Re-advertising now fully handled in `checkRecvFrame()` loop Tested on: iPhone, Android, Windows, and Chrome – confirmed stable reconnects and name visibility.	11 months ago
Normunds Gavars	aa3c702ffd	Read battery voltage on Minewsemi ME25LS01	11 months ago
liquidraver	fa481e832b	LR's corrected calculation override (instead of SX) and minor changes according to radiolib's wiki	11 months ago
Rob Loranger	90656e7d06	clean up xiao nrf52 move variant specific code out of src/helpers redefine RXEN for alternate radio pinout	11 months ago
WattleFoxxo	d23378cff6	Add XIAO RP2040 support	11 months ago
Lloyd	ec98d5f8a5	BLE: Remove ScanResponse.addName() to fix re-advertising after disconnect Removed the call to Bluefruit.ScanResponse.addName() in startAdv(), as it was preventing BLE from reliably restarting advertising after a disconnect. Hypothesis: adding the device name to the scan response exceeds internal buffer limits or causes a conflict with advertising timing, leading to the BLE stack silently failing to re-advertise. Tested successfully (on T-1000) without this line, advertising now resumes correctly after disconnection (on Iphone)	11 months ago
recrof	539f99a90f	removed unsupported(?) readAltitude	11 months ago
recrof	3832836eb2	EnvironmentSensorManager: add support for SHTC3 and LPS22HB	11 months ago
Normunds Gavars	6f94c8148a	Add Minewsemi ME25LS01 variant	11 months ago
Scott Powell	3dc4607d89	* PAYLOAD_TYPE_PATH: reserving upper 4 bits if 'extra_type' field, for future use	11 months ago
Scott Powell	8c80c10d2a	* CustomLR1110::getTimeOnAir(), copied from sx1262	11 months ago
jankowski-t	4541380632	Support MeshAdventurer Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading	11 months ago
liquidraver	ddbf27c245	change fixed preamble to match the new 16	11 months ago
Scott Powell	187eea1b18	* Preamble now 16 (for most variants)	11 months ago
recrof	9530744ff4	add support for BMP280 temperature+pressure sensor	11 months ago
JQ	ff3e888dfd	formatting	11 months ago
JQ	e417c43c30	wireless paper board support	11 months ago
recrof	07f25ccac8	sx1276 boards: migrate to std_init()	11 months ago
Florent de Lamotte	0f259d3b51	CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set	11 months ago
Scott Powell	55ff69bd25	* RAK: 'start ota' returned MAC address was reversed	12 months ago
Florent	8ccd4f3660	stm32: implement halt and reset	12 months ago
Scott Powell	556051955d	* ESP32Board: added support for Neopixel TX led	12 months ago
Scott Powell	b37c8017d9	* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds	12 months ago
Florent	d94f469d53	wio_e5_mini: led and rescue cli	12 months ago
taco	84c2cfdcf2	fix: revert swapped GPS pins reverted GPS pin behaviour and swapped GPS pins for tbeam variants.	12 months ago
cod3doomy	218b96e4aa	T-Beam refactor There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.	12 months ago
Scott Powell	478a57a6bd	* AdvertDataParser: lat/lon can now be zeroes	12 months ago
Scott Powell	9df3c8c663	* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)	12 months ago
JQ	3719c0983c	increase delay slightly	12 months ago
JQ	d680852c99	fix t114 display flicker	12 months ago
Scott Powell	205624824a	* added std_init() to CustomSX1268	12 months ago
taco	14ff7bfbcd	added std_init to CustomLLCC68.h	12 months ago
taco	83842e4b25	fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off. previously the location would always snap to the last heard GPS location after GPS had been on.	12 months ago
Rob Loranger	52a579a366	fix Heltec v2 getBattMilliVolts	12 months ago
Rob Loranger	e5ecf29d0c	return range with advert interval set error updates both local and flood advert preference setting errors to include the allowable range and time units	12 months ago
Rob Loranger	f30698eacb	add time output to both clock sync and time <epoch> cli	12 months ago
Rob Loranger	dbee0d8b8e	update ADC multipler to fix voltage reading	12 months ago
Scott Powell	85b164bcf1	* PicoW refactor, now using radio.std_init()	12 months ago
Scott Powell	b865ac6c23	* refactored SensorManager::toggleGps()	12 months ago
taco	e7b0e9e526	refactor: promicro with CustomSX1262::std_init() added check in CustomSX1262.h to support both txco and non-txco radios switched promicro to use CustomSX1262::std_init()	12 months ago
Florent de Lamotte	588a986976	t1000e: gps toggle not using board class	12 months ago
Florent de Lamotte	b65b4d51eb	Apply refactoring to xiao_nrf52 and xiao_s3	12 months ago
Scott Powell	587d9d8818	* added CustomSX1262::std_init() * refactored variants to use std_init(): heltec_v3, t114, xiao_c3	12 months ago
Florent de Lamotte	8765b3d040	Gps toggle on 4 clicks	12 months ago
Scott Powell	e6ce3c896d	* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH	12 months ago
Scott Powell	9363478d6f	* noise floor can now be queried even when int.thresh = 0	12 months ago
João Brázio	24464d0c4e	Update VBAT schematic	12 months ago
João Brázio	110bd49407	VBAT schematic	12 months ago
João Brázio	3448db6e36	Rename LED pin	12 months ago
João Brázio	8f6b2b75d7	Waveshare RP2040-LoRa board support	12 months ago

1 2 3 4 5 ...

455 Commits (88cbe3fddc9fcd05d9e45cb56f045971ce662f56)