MeshCore

Commit Graph

Author	SHA1	Message	Date
ripplebiz	affe61dc3b	Merge pull request #2880 from ckoehler/push-sonzsorqmwqz refactor: split MeshTables::hasSeen into pure query + markSeen	1 month ago
Christoph Koehler	4f701b7aec	refactor: split MeshTables::hasSeen into pure query + markSeen hasSeen() was simultaneously a predicate and a mutator — it inserted the packet hash on every miss, making five call sites that only wanted to mark a packet as sent call it with the return value discarded. Split into: - wasSeen() — pure predicate, no side effects - markSeen() — explicit insert All query sites now call markSeen() immediately after wasSeen() returns false, preserving identical runtime behaviour. The five mark-only send sites (sendFlood, sendDirect, sendZeroHop x2) now call markSeen directly. Also fixes three bridge sites (BridgeBase, ESPNowBridge, RS232Bridge) that had the same query+implicit-insert pattern. Tests: add test/test_mesh_tables/ covering wasSeen purity, markSeen, dup stats, and clear. Update SHA256 mock to produce deterministic output (previously finalize() was a no-op). Add Packet.cpp to native build filter.	1 month ago
Liam Cottle	dd87371574	Merge pull request #2873 from ckoehler/fix/nix-devshell build: add gcc, gtest to nix shell, fix native test framework	1 month ago
Christoph Koehler	4f7c1cb88f	build: add gcc, gtest to nix shell, fix native test framework	2 months ago
entr0p1	2cb3a29fa8	SX1262 LDO Support - Added build flag "SX126X_USE_REGULATOR_LDO" (set to 1 to enable) to use LDO for the SX1262 radio instead of DC-DC when the DCDC pin isn't wired up (e.g. t-echo lite) - Added additional debug mode diagnostic messages during SX1262 init to better highlight faults	1 month ago
Liam Cottle	1869b57d62	Merge pull request #2853 from HDDen/dev Add Data-Type to number_allocations.md	1 month ago
HDDen	58b0f7df9c	Update number_allocations.md	1 month ago
HDDen	bc35208682	Update number_allocations.md Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)	1 month ago
Scott Powell	4f8cb8db78	* ACK packets being 'clipped' (in Dispatcher send). Needed to extend max_airtime timeout calc for short packets	1 month ago
Liam Cottle	5ff39c6243	Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605 Added flash_mode=dio to avoid boot loop when flashing using merge.bin	1 month ago
Liam Cottle	dc200cf22d	Merge pull request #2639 from sefinek/fix/typos-in-comments fix: fix typos in source code comments	1 month ago
Liam Cottle	62b95b4e48	Merge pull request #2844 from oltaco/fix-rx-boosted-gain Fix for Rx boosted gain on LR1110	1 month ago
taco	f3d4d8cd5e	always save boosted gain setting	1 month ago
Liam Cottle	3d4eec4a6a	Merge pull request #1194 from ViezeVingertjes/nibble_zero_connect Added support for the nibble zero connect	1 month ago
taco	b07aba7937	fix: report error when rxgain setting is unsupported or rejected	1 month ago
taco	1f9bb67400	return bool when setting rx boost	1 month ago
ViezeVingertjes	b8f1fad654	Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds	1 month ago
ViezeVingertjes	eb938a9b78	Address review comments and sync with dev	3 months ago
ViezeVingertjes	69df5c7a95	Remove NeoPixel configuration as its unused.	6 months ago
ViezeVingertjes	9c7d71b9be	Added support for the nibble zero connect	8 months ago
taco	5d0ff7fe6e	remove guard on MyMesh::setRxBoostedGain()	1 month ago
liamcottle	b975180fc8	initial support for elecrow thinknode m7	1 month ago
Nick Dunklee	7a2764ebd6	Added Heltec t096 and seeed t1000-e Tested Heltec t096 and Seeed t1000-e, both support this hardware feature.	1 month ago
Nick Dunklee	4ac8742ce0	feat: use RAK hardware crypto on advert processing While working on some sensor code implementations, I ran into some hard crashes that root-caused to the 4KB loop task stack being exhausted. Looking for various optimization schemes resulted in this relatively low-lift fix. RAK3401 and RAK4631 both support hardware crypto. Rather than loading in one of the two software crypto libs, we can just use the onboard hardware. This is faster, should consume less power, and in testing used a scant up to 700 bytes in the run loop vs 2.5-3KB per advert. This change only affects advert verification processing, which currently consumes a significant chunk of the 4KB run loop. I figured such a change should likely be implemented in phases. After soaking, this hardware crypto verification process could be implemented across the entire MeshCore cryptographic function on RAK nodes. Also possible other nodes have available hardware crypto, however, I have not checked, so future improvements may also exist there. Tested on: - RAK3401 RAK 1W - RAK4631 19001	1 month ago
ripplebiz	3192684582	Merge pull request #2752 from Quency-D/heltec-tower-v2 Add Heltec tower v2	1 month ago
ripplebiz	aa1cb1f663	Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command	1 month ago
ripplebiz	6a63dfce1c	Merge pull request #2771 from oltaco/nrf52-framework-buildfix Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork	1 month ago
Liam Cottle	c2cfba4af3	Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606 Fixed GPS time sync for Heltec T114	1 month ago
Kevin Le	62849ef114	Fixed GPS time sync for Heltec T114	1 month ago
ripplebiz	60ea4a91bf	Merge pull request #1727 from weebl2000/use-hardware-channel-activity-detection Use hardware channel activity detection for checking interference	2 months ago
taco	dd9b3b32c3	build fix for Heltec Mesh Solar and Mesh Pocket	2 months ago
Wessel Nieboer	7c8e092457	Have CAD be a separate toggle (set cad on/off)	2 months ago
Wessel Nieboer	099ef67348	Prevent packet errors from growing	5 months ago
Wessel Nieboer	04a6c7009a	Just check for not channel free	5 months ago
Wessel Nieboer	813d108c7a	Also return busy if preamble detected	5 months ago
Wessel Nieboer	4f9a091671	Use hardware channel activity detection for checking interference	6 months ago
Marco	e7db7c5a94	Add ESP32 Reset Reason	2 months ago
Huw Duddy	29f0a7fc4f	Merge pull request #2763 from meshcore-dev/anon-contacts-fix * fix for anon contacts when full	2 months ago
Scott Powell	2e73fe948e	* fix for anon lastmod	2 months ago
Scott Powell	538ac38e18	* fix for counter in RESP_CODE_CONTACTS_START	2 months ago
Scott Powell	c2d223ff55	* now handle the case where onAdvertRecv() should _replace_ the anon contact slot	2 months ago
Scott Powell	07648e3344	* fix for anon contacts when full	2 months ago
ripplebiz	a5cb0c25ca	Merge pull request #2140 from Quency-D/cli-lna-command Add CLI control to LoRa's fem LNA.	2 months ago
Quency-D	5300fa18c7	Restore companion NodePrefs file ending	2 months ago
Quency-D	3ee58fd2e3	Remove companion FEM RX gain command IDs	2 months ago
Scott Powell	d5f74e93c5	* PAYLOAD_TYPE_PATH bad path_len now rejected	2 months ago
Quency-D	1c4c995a41	Fix low power consumption issues	2 months ago
Quency-D	d2d3d44c9b	Add maximum power limit	2 months ago
Quency-D	fe56d01da2	add tower v2 PA control	2 months ago
Quency-D	190dbb5293	Merge pull request #13 from meshcore-dev/dev merge Dev	2 months ago

1 2 3 4 5 ...

3101 Commits (874f0c9ff8ea72db540ac1e1e8a7164b2ff7c49f) All Branches Search

3101 Commits (874f0c9ff8ea72db540ac1e1e8a7164b2ff7c49f)

All Branches