MeshCore

Commit Graph

Author	SHA1	Message	Date
Rob Loranger	90656e7d06	clean up xiao nrf52 move variant specific code out of src/helpers redefine RXEN for alternate radio pinout	12 months ago
WattleFoxxo	d23378cff6	Add XIAO RP2040 support	12 months ago
Lloyd	ec98d5f8a5	BLE: Remove ScanResponse.addName() to fix re-advertising after disconnect Removed the call to Bluefruit.ScanResponse.addName() in startAdv(), as it was preventing BLE from reliably restarting advertising after a disconnect. Hypothesis: adding the device name to the scan response exceeds internal buffer limits or causes a conflict with advertising timing, leading to the BLE stack silently failing to re-advertise. Tested successfully (on T-1000) without this line, advertising now resumes correctly after disconnection (on Iphone)	12 months ago
recrof	539f99a90f	removed unsupported(?) readAltitude	12 months ago
recrof	3832836eb2	EnvironmentSensorManager: add support for SHTC3 and LPS22HB	12 months ago
Normunds Gavars	6f94c8148a	Add Minewsemi ME25LS01 variant	1 year ago
Scott Powell	3dc4607d89	* PAYLOAD_TYPE_PATH: reserving upper 4 bits if 'extra_type' field, for future use	1 year ago
Scott Powell	8c80c10d2a	* CustomLR1110::getTimeOnAir(), copied from sx1262	1 year ago
jankowski-t	4541380632	Support MeshAdventurer Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading	1 year ago
liquidraver	ddbf27c245	change fixed preamble to match the new 16	1 year ago
Scott Powell	187eea1b18	* Preamble now 16 (for most variants)	1 year ago
recrof	9530744ff4	add support for BMP280 temperature+pressure sensor	1 year ago
JQ	ff3e888dfd	formatting	1 year ago
JQ	e417c43c30	wireless paper board support	1 year ago
João Brázio	4b70ee863d	Serial bridge implementation	1 year ago
recrof	07f25ccac8	sx1276 boards: migrate to std_init()	1 year ago
Florent de Lamotte	0f259d3b51	CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set	1 year ago
Scott Powell	55ff69bd25	* RAK: 'start ota' returned MAC address was reversed	1 year ago
Florent	8ccd4f3660	stm32: implement halt and reset	1 year ago
Scott Powell	556051955d	* ESP32Board: added support for Neopixel TX led	1 year ago
Scott Powell	b37c8017d9	* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds	1 year ago
Florent	d94f469d53	wio_e5_mini: led and rescue cli	1 year ago
taco	84c2cfdcf2	fix: revert swapped GPS pins reverted GPS pin behaviour and swapped GPS pins for tbeam variants.	1 year ago
cod3doomy	218b96e4aa	T-Beam refactor There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.	1 year ago
Scott Powell	b1ca3d1eb1	* new PAYLOAD_TYPE_MULTIPART * experimental double ACK's (at each hop), sent 300ms apart (direct mode only)	1 year ago
Scott Powell	478a57a6bd	* AdvertDataParser: lat/lon can now be zeroes	1 year ago
Scott Powell	9df3c8c663	* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)	1 year ago
JQ	3719c0983c	increase delay slightly	1 year ago
JQ	d680852c99	fix t114 display flicker	1 year ago
Scott Powell	205624824a	* added std_init() to CustomSX1268	1 year ago
taco	14ff7bfbcd	added std_init to CustomLLCC68.h	1 year ago
taco	83842e4b25	fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off. previously the location would always snap to the last heard GPS location after GPS had been on.	1 year ago
Rob Loranger	52a579a366	fix Heltec v2 getBattMilliVolts	1 year ago
Rob Loranger	e5ecf29d0c	return range with advert interval set error updates both local and flood advert preference setting errors to include the allowable range and time units	1 year ago
Rob Loranger	f30698eacb	add time output to both clock sync and time <epoch> cli	1 year ago
Rob Loranger	dbee0d8b8e	update ADC multipler to fix voltage reading	1 year ago
Scott Powell	85b164bcf1	* PicoW refactor, now using radio.std_init()	1 year ago
Scott Powell	b865ac6c23	* refactored SensorManager::toggleGps()	1 year ago
taco	e7b0e9e526	refactor: promicro with CustomSX1262::std_init() added check in CustomSX1262.h to support both txco and non-txco radios switched promicro to use CustomSX1262::std_init()	1 year ago
Florent de Lamotte	588a986976	t1000e: gps toggle not using board class	1 year ago
Florent de Lamotte	b65b4d51eb	Apply refactoring to xiao_nrf52 and xiao_s3	1 year ago
Scott Powell	587d9d8818	* added CustomSX1262::std_init() * refactored variants to use std_init(): heltec_v3, t114, xiao_c3	1 year ago
Florent de Lamotte	8765b3d040	Gps toggle on 4 clicks	1 year ago
Scott Powell	e6ce3c896d	* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH	1 year ago
Scott Powell	9363478d6f	* noise floor can now be queried even when int.thresh = 0	1 year ago
João Brázio	24464d0c4e	Update VBAT schematic	1 year ago
João Brázio	110bd49407	VBAT schematic	1 year ago
João Brázio	3448db6e36	Rename LED pin	1 year ago
João Brázio	8f6b2b75d7	Waveshare RP2040-LoRa board support	1 year ago
Scott Powell	466bd6d596	* fix for when AGC reset is disabled (interval = 0)	1 year ago

... 3 4 5 6 7 ...

725 Commits (6d486e1edaf38d6bc82b3b53d27e2e0b478da33d)