MeshCore

Commit Graph

Author	SHA1	Message	Date
Ryan Gregg	3e9ceba24a	Updates based on PR review feedback from liamcottle	4 months ago
Ryan Gregg	aea64e1f19	Address PR review feedback for Ethernet support - Add #pragma once to SerialEthernetInterface.h - Rename TCP_PORT to ETH_TCP_PORT with #ifndef guard - Fix typos: "initalizing" → "initializing" - Fix #elif without condition → #else for STM32 block - Replace infinite loop on ETH init failure with halt() - Remove heartbeat Serial.print(".") output - Remove dead beginETH() call (ETH_ENABLED, not RAK_ETH_ENABLE) - Comment out MESH_DEBUG and ETH_DEBUG_LOGGING build flags Co-Authored-By: Claude Opus 4.6 <[email protected]>	5 months ago
Ryan Gregg	70b51bd096	Add native Ethernet support for RAK4631 repeater, room server, and companion Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling TCP CLI access on port 23 as an alternative to BLE/Serial connections. - New SerialEthernetInterface for nRF52 with DHCP, reconnection handling, and shared WB_IO2 power pin management with GPS module - Ethernet build targets for repeater, room server, and companion firmware - Prevent GPS from toggling WB_IO2 when Ethernet module is active - CI build check for all three ETH firmware targets Co-Authored-By: Claude Opus 4.6 <[email protected]>	5 months ago
Wessel Nieboer	67d22401b1	Pass rtc_clock to all MicroNMEALocationProvider instances Enable GPS time synchronization across all variants by passing &rtc_clock to MicroNMEALocationProvider. When GPS gets a valid fix, the RTC clock is now updated automatically every 30 minutes. Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag, lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1, lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3, promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.	6 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	7 months ago
agessaman	0fb570338f	fix(kiss): periodic noise floor calibration and AGC reset - Trigger noise floor calibration every 2s and AGC reset every 30s in main loop. - Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset and recvRaw() so RSSI is never sampled right after startReceive(). - Update protocol doc with calibration intervals and typical noise floor range. - Variant platformio.ini updates (heltec_v3, rak4631).	6 months ago
Rastislav Vysoky	f41872420e	moved pindefs from board file to variant.h	6 months ago
entr0p1	1f59e52880	nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout Added NRF52840 power management core functionality: - Boot‑voltage lockout - Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2) - LPCOMP wake (for voltage-driven shutdowns) - VBUS wake (for voltage-driven shutdowns) - Per-board shutdown handler for board-specific tasks - Exposed CLI queries for power‑management status in CommonCLI.cpp - Added documentation in docs/nrf52_power_management.md. - Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards	6 months ago
Frieder Schrempf	4f46ec75dd	Remove NRF52BoardOTA class and integrate it into NRF52Board As all NRF52 boards now have OTA support, let's remove the subclass and integrate it into the base class. Signed-off-by: Frieder Schrempf <[email protected]>	7 months ago
Frieder Schrempf	8eb229bcf8	variants: RAK4631: Enable DC/DC regulator to reduce power consumption The RAK4631/RAK4630 module are able to use the DC/DC converter. Enable it to reduce power consumption. Signed-off-by: Frieder Schrempf <[email protected]>	8 months ago
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <[email protected]>	8 months ago
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <[email protected]>	8 months ago
Frieder Schrempf	87b0e432bb	Deduplicate reboot() for NRF52 boards The reboot() method is the same for all NRF52 boards. Use a shared implementation. Signed-off-by: Frieder Schrempf <[email protected]>	8 months ago
Kevin Le	4504ad4daf	Added default temperature from ESP32 MCU and NRF52 MCU Added NRF52Board.h and NRF52Board.cpp Modified NRF52 variants to extend from NRF52Board to share common feature	7 months ago
João Brázio	f56172738d	Bridge: Fix RAK4631 serial2 GPS conflict	8 months ago
João Brázio	baedddb25d	Rename RS232 bridge environments and update build flags for Serial1 and Serial2	8 months ago
João Brázio	eafbd85d17	Add RAK4631 support for rs232 bridge	8 months ago
liquidraver	b0ce00652f	Fix RAK4631 GPS UART pin macros	8 months ago
recrof	a5070077ba	equalize RAK with all other nrf52 variants and use newer platform with all important fixes	9 months ago
liamcottle	0307b6119e	increase MAX_NEIGHBOURS from 8 to 50	10 months ago
João Brázio	510472bfa0	Normalize repeater target names	11 months ago
taco	e8314c9c8c	new ldscript for extrafs nrf companion envs	11 months ago
taco	accd1e0a97	nrf52 targets: increase limits for contacts and channels	11 months ago
liamcottle	3ad43431d9	fixed wismesh pocket user button	11 months ago
Scott Powell	74722c24b8	* MomentaryButton: added support for analog button (with threshold) * RAK: support for PIN_USER_BTN_ANA	11 months ago
recrof	d145d5936d	fix RAK build errors	11 months ago
Scott Powell	fe376e8c35	* RAK_4631: ui-new	11 months ago
recrof	6861b0702f	create sensor template in platformio.ini, update heltec v3 and rak4631 to use new template	12 months ago
Martin Kudlacek	822850b4d5	Support for Sensirion SHT4x	1 year ago
Martin Kudlacek	a96d1022a0	Added support for TI INA260	1 year ago
recrof	f88ebad604	enable all sensors on RAK4631	1 year ago
cod3doomy	6b4592bfe2	Cleanup and fixes -Added RAK_4631 define back -Added includes for common RAK sensors that are currently supported in ESM -Set global variables to static -Reduced delay time within the RAK gps init sequence	1 year ago
cod3doomy	660ab0692f	RAK4631 ESM Migration Changes to migrate sensor code to the ESM. Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501) Removed the GPS specific envs from platformio.ini and enabled GPS for all envs. Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.	1 year ago
recrof	6be8e19a9f	move radiolib wrappers to dedicated directory	1 year ago
recrof	854a8dfe2f	move rak to nrf52_core, remove nrf52840_core	1 year ago
Rob Loranger	9d0dd7947f	move rak4631 specific files into variant folder	1 year ago
Rob Loranger	ad2e015a5b	move rak usr btn to companions repeaters do not typically have user buttons and there is only one analog pin available on most, if not all, base boards. so this allows repeaters to add custom peripherals or alternate battery signals	1 year ago
Scott Powell	3bd1dc3ffa	* minor tidy ups	1 year ago
cod3doomy	63247667d0	String removed Removed all string type casting	1 year ago
cod3doomy	001b996a24	RAK4631: BME680 add and GPS cleanup - Added the BME680 environment sensor functionality - Added the GPS Repeater env for those wanting it - Cleaned up the GPS and other RAK4631SensorManager code Verified build and functionality on normal and GPS repeater and companion envs. IAQ readout is still a work in progress, but a placeholder can be seen on Channel 2 of the app telemetry.	1 year ago
taco	9eff882e18	refactor: RAK4631 with CustomSX1262::std_init()	1 year ago
Scott Powell	7dd7b715cd	* enabling _PRIVATE_KEY import/export for ALL companions.	1 year ago
Scott Powell	4b16cda03a	* RAK4632 targets, now requiring ENV_INCLUDE_GPS to enable GPS	1 year ago
cod3doomy	0e8b807a8b	RAK4631: Add RAK12500 GPS support Added RAK12500 GPS support Added socket scan capability to determine which socket the GPS is connected to T-beam supreme: added conditional to displaying location data to only when gps is active	1 year ago
Adam Mealings	009173ab9e	added missing variable defs and pinmode	1 year ago
Scott Powell	a73eb9823d	* big refactor of the 'display' object. Now defined in variants/*/target modules.	1 year ago
adam2872	f1df9f7c3b	Revert "RAK4631 analogue user button on input 31"	1 year ago
Adam Mealings	faf043327d	RAK4631 analogue user button on input 31	1 year ago
liamcottle	6c0d94aa2d	increase offline queue size from 16 to 256 for all companion ble firmwares	1 year ago
recrof	76639e2a68	raise current limit to max for sx126x and sx127x	1 year ago

1 2

64 Commits (61ba79966b01b72476913f7783b2473b3ecb0652)